65 lines
1.8 KiB
ReStructuredText
65 lines
1.8 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
Kernel driver adp1050
|
|
=====================
|
|
|
|
Supported chips:
|
|
|
|
* Analog Devices ADP1050
|
|
|
|
Prefix: 'adp1050'
|
|
|
|
Addresses scanned: I2C 0x70 - 0x77
|
|
|
|
Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADP1050.pdf
|
|
|
|
Authors:
|
|
|
|
- Radu Sabau <radu.sabau@analog.com>
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
This driver supprts hardware monitoring for Analog Devices ADP1050 Digital
|
|
Controller for Isolated Power Supply with PMBus interface.
|
|
|
|
The ADP1050 is an advanced digital controller with a PMBus™
|
|
interface targeting high density, high efficiency dc-to-dc power
|
|
conversion used to monitor system temperatures, voltages and currents.
|
|
Through the PMBus interface, the device can monitor input/output voltages,
|
|
input current and temperature.
|
|
|
|
Usage Notes
|
|
-----------
|
|
|
|
This driver does not auto-detect devices. You will have to instantiate
|
|
the devices explicitly.
|
|
Please see Documentation/i2c/instantiating-devices.rst for details.
|
|
|
|
Platform data support
|
|
---------------------
|
|
|
|
The driver supports standard PMBus driver platform data.
|
|
|
|
Sysfs Attributes
|
|
----------------
|
|
|
|
================= ========================================
|
|
in1_label "vin"
|
|
in1_input Measured input voltage
|
|
in1_alarm Input voltage alarm
|
|
in2_label "vout1"
|
|
in2_input Measured output voltage
|
|
in2_crit Critical maximum output voltage
|
|
in2_crit_alarm Output voltage high alarm
|
|
in2_lcrit Critical minimum output voltage
|
|
in2_lcrit_alarm Output voltage critical low alarm
|
|
curr1_label "iin"
|
|
curr1_input Measured input current.
|
|
curr1_alarm Input current alarm
|
|
temp1_input Measured temperature
|
|
temp1_crit Critical high temperature
|
|
temp1_crit_alarm Chip temperature critical high alarm
|
|
================= ========================================
|