original_kernel/drivers/net/irda/ma600-sir.c

265 lines
6.8 KiB
C

/*********************************************************************
*
* Filename: ma600.c
* Version: 0.1
* Description: Implementation of the MA600 dongle
* Status: Experimental.
* Author: Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95
* Created at: Sat Jun 10 20:02:35 2000
* Modified at: Sat Aug 16 09:34:13 2003
* Modified by: Martin Diehl <mad@mdiehl.de> (modified for new sir_dev)
*
* Note: very thanks to Mr. Maru Wang <maru@mobileaction.com.tw> for providing
* information on the MA600 dongle
*
* Copyright (c) 2000 Leung, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
********************************************************************/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <net/irda/irda.h>
#include "sir-dev.h"
static int ma600_open(struct sir_dev *);
static int ma600_close(struct sir_dev *);
static int ma600_change_speed(struct sir_dev *, unsigned);
static int ma600_reset(struct sir_dev *);
/* control byte for MA600 */
#define MA600_9600 0x00
#define MA600_19200 0x01
#define MA600_38400 0x02
#define MA600_57600 0x03
#define MA600_115200 0x04
#define MA600_DEV_ID1 0x05
#define MA600_DEV_ID2 0x06
#define MA600_2400 0x08
static struct dongle_driver ma600 = {
.owner = THIS_MODULE,
.driver_name = "MA600",
.type = IRDA_MA600_DONGLE,
.open = ma600_open,
.close = ma600_close,
.reset = ma600_reset,
.set_speed = ma600_change_speed,
};
static int __init ma600_sir_init(void)
{
IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
return irda_register_dongle(&ma600);
}
static void __exit ma600_sir_cleanup(void)
{
IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
irda_unregister_dongle(&ma600);
}
/*
Power on:
(0) Clear RTS and DTR for 1 second
(1) Set RTS and DTR for 1 second
(2) 9600 bps now
Note: assume RTS, DTR are clear before
*/
static int ma600_open(struct sir_dev *dev)
{
struct qos_info *qos = &dev->qos;
IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
sirdev_set_dtr_rts(dev, TRUE, TRUE);
/* Explicitly set the speeds we can accept */
qos->baud_rate.bits &= IR_2400|IR_9600|IR_19200|IR_38400
|IR_57600|IR_115200;
/* Hm, 0x01 means 10ms - for >= 1ms we would need 0x07 */
qos->min_turn_time.bits = 0x01; /* Needs at least 1 ms */
irda_qos_bits_to_value(qos);
/* irda thread waits 50 msec for power settling */
return 0;
}
static int ma600_close(struct sir_dev *dev)
{
IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
/* Power off dongle */
sirdev_set_dtr_rts(dev, FALSE, FALSE);
return 0;
}
static __u8 get_control_byte(__u32 speed)
{
__u8 byte;
switch (speed) {
default:
case 115200:
byte = MA600_115200;
break;
case 57600:
byte = MA600_57600;
break;
case 38400:
byte = MA600_38400;
break;
case 19200:
byte = MA600_19200;
break;
case 9600:
byte = MA600_9600;
break;
case 2400:
byte = MA600_2400;
break;
}
return byte;
}
/*
* Function ma600_change_speed (dev, speed)
*
* Set the speed for the MA600 type dongle.
*
* The dongle has already been reset to a known state (dongle default)
* We cycle through speeds by pulsing RTS low and then high.
*/
/*
* Function ma600_change_speed (dev, speed)
*
* Set the speed for the MA600 type dongle.
*
* Algorithm
* 1. Reset (already done by irda thread state machine)
* 2. clear RTS, set DTR and wait for 1ms
* 3. send Control Byte to the MA600 through TXD to set new baud rate
* wait until the stop bit of Control Byte is sent (for 9600 baud rate,
* it takes about 10 msec)
* 4. set RTS, set DTR (return to NORMAL Operation)
* 5. wait at least 10 ms, new setting (baud rate, etc) takes effect here
* after
*/
/* total delays are only about 20ms - let's just sleep for now to
* avoid the state machine complexity before we get things working
*/
static int ma600_change_speed(struct sir_dev *dev, unsigned speed)
{
u8 byte;
IRDA_DEBUG(2, "%s(), speed=%d (was %d)\n", __FUNCTION__,
speed, dev->speed);
/* dongle already reset, dongle and port at default speed (9600) */
/* Set RTS low for 1 ms */
sirdev_set_dtr_rts(dev, TRUE, FALSE);
mdelay(1);
/* Write control byte */
byte = get_control_byte(speed);
sirdev_raw_write(dev, &byte, sizeof(byte));
/* Wait at least 10ms: fake wait_until_sent - 10 bits at 9600 baud*/
msleep(15); /* old ma600 uses 15ms */
#if 1
/* read-back of the control byte. ma600 is the first dongle driver
* which uses this so there might be some unidentified issues.
* Disable this in case of problems with readback.
*/
sirdev_raw_read(dev, &byte, sizeof(byte));
if (byte != get_control_byte(speed)) {
IRDA_WARNING("%s(): bad control byte read-back %02x != %02x\n",
__FUNCTION__, (unsigned) byte,
(unsigned) get_control_byte(speed));
return -1;
}
else
IRDA_DEBUG(2, "%s() control byte write read OK\n", __FUNCTION__);
#endif
/* Set DTR, Set RTS */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
/* Wait at least 10ms */
msleep(10);
/* dongle is now switched to the new speed */
dev->speed = speed;
return 0;
}
/*
* Function ma600_reset (dev)
*
* This function resets the ma600 dongle.
*
* Algorithm:
* 0. DTR=0, RTS=1 and wait 10 ms
* 1. DTR=1, RTS=1 and wait 10 ms
* 2. 9600 bps now
*/
/* total delays are only about 20ms - let's just sleep for now to
* avoid the state machine complexity before we get things working
*/
int ma600_reset(struct sir_dev *dev)
{
IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
/* Reset the dongle : set DTR low for 10 ms */
sirdev_set_dtr_rts(dev, FALSE, TRUE);
msleep(10);
/* Go back to normal mode */
sirdev_set_dtr_rts(dev, TRUE, TRUE);
msleep(10);
dev->speed = 9600; /* That's the dongle-default */
return 0;
}
MODULE_AUTHOR("Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95");
MODULE_DESCRIPTION("MA600 dongle driver version 0.1");
MODULE_LICENSE("GPL");
MODULE_ALIAS("irda-dongle-11"); /* IRDA_MA600_DONGLE */
module_init(ma600_sir_init);
module_exit(ma600_sir_cleanup);