original_kernel/drivers/uio/uio_netx.c

193 lines
4.5 KiB
C

/*
* UIO driver for Hilscher NetX based fieldbus cards (cifX, comX).
* See http://www.hilscher.com for details.
*
* (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
* (C) 2008 Manuel Traut <manut@linutronix.de>
*
* Licensed under GPL version 2 only.
*
*/
#include <linux/device.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/uio_driver.h>
#define PCI_VENDOR_ID_HILSCHER 0x15CF
#define PCI_DEVICE_ID_HILSCHER_NETX 0x0000
#define PCI_DEVICE_ID_HILSCHER_NETPLC 0x0010
#define PCI_SUBDEVICE_ID_NETPLC_RAM 0x0000
#define PCI_SUBDEVICE_ID_NETPLC_FLASH 0x0001
#define PCI_SUBDEVICE_ID_NXSB_PCA 0x3235
#define PCI_SUBDEVICE_ID_NXPCA 0x3335
#define DPM_HOST_INT_EN0 0xfff0
#define DPM_HOST_INT_STAT0 0xffe0
#define DPM_HOST_INT_MASK 0xe600ffff
#define DPM_HOST_INT_GLOBAL_EN 0x80000000
static irqreturn_t netx_handler(int irq, struct uio_info *dev_info)
{
void __iomem *int_enable_reg = dev_info->mem[0].internal_addr
+ DPM_HOST_INT_EN0;
void __iomem *int_status_reg = dev_info->mem[0].internal_addr
+ DPM_HOST_INT_STAT0;
/* Is one of our interrupts enabled and active ? */
if (!(ioread32(int_enable_reg) & ioread32(int_status_reg)
& DPM_HOST_INT_MASK))
return IRQ_NONE;
/* Disable interrupt */
iowrite32(ioread32(int_enable_reg) & ~DPM_HOST_INT_GLOBAL_EN,
int_enable_reg);
return IRQ_HANDLED;
}
static int netx_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct uio_info *info;
int bar;
info = kzalloc(sizeof(struct uio_info), GFP_KERNEL);
if (!info)
return -ENOMEM;
if (pci_enable_device(dev))
goto out_free;
if (pci_request_regions(dev, "netx"))
goto out_disable;
switch (id->device) {
case PCI_DEVICE_ID_HILSCHER_NETX:
bar = 0;
info->name = "netx";
break;
case PCI_DEVICE_ID_HILSCHER_NETPLC:
bar = 0;
info->name = "netplc";
break;
default:
bar = 2;
info->name = "netx_plx";
}
/* BAR0 or 2 points to the card's dual port memory */
info->mem[0].addr = pci_resource_start(dev, bar);
if (!info->mem[0].addr)
goto out_release;
info->mem[0].internal_addr = ioremap(pci_resource_start(dev, bar),
pci_resource_len(dev, bar));
if (!info->mem[0].internal_addr)
goto out_release;
info->mem[0].size = pci_resource_len(dev, bar);
info->mem[0].memtype = UIO_MEM_PHYS;
info->irq = dev->irq;
info->irq_flags = IRQF_SHARED;
info->handler = netx_handler;
info->version = "0.0.1";
/* Make sure all interrupts are disabled */
iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
if (uio_register_device(&dev->dev, info))
goto out_unmap;
pci_set_drvdata(dev, info);
dev_info(&dev->dev, "Found %s card, registered UIO device.\n",
info->name);
return 0;
out_unmap:
iounmap(info->mem[0].internal_addr);
out_release:
pci_release_regions(dev);
out_disable:
pci_disable_device(dev);
out_free:
kfree(info);
return -ENODEV;
}
static void netx_pci_remove(struct pci_dev *dev)
{
struct uio_info *info = pci_get_drvdata(dev);
/* Disable all interrupts */
iowrite32(0, info->mem[0].internal_addr + DPM_HOST_INT_EN0);
uio_unregister_device(info);
pci_release_regions(dev);
pci_disable_device(dev);
pci_set_drvdata(dev, NULL);
iounmap(info->mem[0].internal_addr);
kfree(info);
}
static struct pci_device_id netx_pci_ids[] = {
{
.vendor = PCI_VENDOR_ID_HILSCHER,
.device = PCI_DEVICE_ID_HILSCHER_NETX,
.subvendor = 0,
.subdevice = 0,
},
{
.vendor = PCI_VENDOR_ID_HILSCHER,
.device = PCI_DEVICE_ID_HILSCHER_NETPLC,
.subvendor = PCI_VENDOR_ID_HILSCHER,
.subdevice = PCI_SUBDEVICE_ID_NETPLC_RAM,
},
{
.vendor = PCI_VENDOR_ID_HILSCHER,
.device = PCI_DEVICE_ID_HILSCHER_NETPLC,
.subvendor = PCI_VENDOR_ID_HILSCHER,
.subdevice = PCI_SUBDEVICE_ID_NETPLC_FLASH,
},
{
.vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_9030,
.subvendor = PCI_VENDOR_ID_PLX,
.subdevice = PCI_SUBDEVICE_ID_NXSB_PCA,
},
{
.vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_9030,
.subvendor = PCI_VENDOR_ID_PLX,
.subdevice = PCI_SUBDEVICE_ID_NXPCA,
},
{ 0, }
};
static struct pci_driver netx_pci_driver = {
.name = "netx",
.id_table = netx_pci_ids,
.probe = netx_pci_probe,
.remove = netx_pci_remove,
};
static int __init netx_init_module(void)
{
return pci_register_driver(&netx_pci_driver);
}
static void __exit netx_exit_module(void)
{
pci_unregister_driver(&netx_pci_driver);
}
module_init(netx_init_module);
module_exit(netx_exit_module);
MODULE_DEVICE_TABLE(pci, netx_pci_ids);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Hans J. Koch, Manuel Traut");