original_kernel/drivers/serial
Mark A. Greer 7bbdc3d51c serial: MPSC: set baudrate when BRG divider is set.
The clock to generate the desired baudrate with the MPSC is first divided
by the Baud Rate Generator (BRG) and then by the MPSC itself.  So, when the
BRG divider is changed, the MPSC divider must also be changed to generate
the correct baudrate.  During MPSC initialization, the BRG divider is
changed but the MPSC divider isn't changed until much later.  This results
in some printk's coming out garbled.  To fix that, set the MPSC divider at
the same time that the BRG divider is changed.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05 09:44:10 -08:00
..
cpm_uart [POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.c 2008-01-28 08:31:05 -06:00
jsm
8250.c serial: Coding style 2008-02-05 09:44:10 -08:00
8250.h
8250_accent.c
8250_acorn.c
8250_au1x00.c
8250_boca.c
8250_early.c
8250_exar_st16c554.c
8250_fourport.c
8250_gsc.c
8250_hp300.c
8250_hub6.c
8250_mca.c
8250_pci.c serial: add ADDI-DATA GmbH Communication cardsin8250_pci.c and pci_ids.h 2008-02-05 09:44:09 -08:00
8250_pnp.c serial: Coding style 2008-02-05 09:44:10 -08:00
21285.c [ARM] 21285 serial: fix build error 2008-02-04 13:14:06 +00:00
68328serial.c m68knommu: use IRQF_DISABLE in m68328serial.c 2008-02-01 21:00:01 +11:00
68328serial.h
68360serial.c
Kconfig SERIAL_NETX_CONSOLE provides console for NetX, not IMX 2008-02-03 14:55:57 +02:00
Makefile m68knommu: build support for new ColdFire serial driver 2008-02-01 20:54:03 +11:00
amba-pl010.c
amba-pl011.c
atmel_serial.c [ARM] 4660/3: at91: allow selecting UART for early kernel messages 2008-02-04 13:16:39 +00:00
bfin_5xx.c
clps711x.c
crisv10.c
crisv10.h
dz.c
dz.h
icom.c
icom.h Coding style fix drivers/serial/icom.h 2008-02-03 14:47:38 +02:00
imx.c
ioc3_serial.c
ioc4_serial.c
ip22zilog.c
ip22zilog.h
m32r_sio.c
m32r_sio.h
m32r_sio_reg.h
mcf.c m68knommu: use container_of in mcf.c 2008-02-01 21:00:01 +11:00
mcfserial.c
mcfserial.h
mpc52xx_uart.c [POWERPC] mpc5200: normalize compatible property bindings 2008-01-26 15:26:01 -07:00
mpsc.c serial: MPSC: set baudrate when BRG divider is set. 2008-02-05 09:44:10 -08:00
mux.c drivers/serial/: Spelling fixes 2008-02-03 17:29:25 +02:00
netx-serial.c
of_serial.c
pmac_zilog.c
pmac_zilog.h
pnx8xxx_uart.c
pxa.c
s3c2410.c drivers/serial/s3c2410.c: remove dead config symbols 2008-02-05 09:44:09 -08:00
sa1100.c
sb1250-duart.c
serial_core.c serial: speed setup failure reporting 2008-02-05 09:44:10 -08:00
serial_cs.c pcmcia: replace kio_addr_t with unsigned int everywhere 2008-02-05 09:44:08 -08:00
serial_ks8695.c
serial_lh7a40x.c
serial_txx9.c
sh-sci.c sh: Add support for SH7763 CPU subtype. 2008-01-28 13:19:02 +09:00
sh-sci.h sh: Add support for SH7763 CPU subtype. 2008-01-28 13:19:02 +09:00
sn_console.c
suncore.c
suncore.h
sunhv.c
sunsab.c
sunsab.h
sunsu.c
sunzilog.c
sunzilog.h
uartlite.c
ucc_uart.c
v850e_uart.c
vr41xx_siu.c
zs.c
zs.h