original_kernel/include/asm-x86_64/hw_irq.h

147 lines
3.7 KiB
C

#ifndef _ASM_HW_IRQ_H
#define _ASM_HW_IRQ_H
/*
* linux/include/asm/hw_irq.h
*
* (C) 1992, 1993 Linus Torvalds, (C) 1997 Ingo Molnar
*
* moved some of the old arch/i386/kernel/irq.h to here. VY
*
* IRQ/IPI changes taken from work by Thomas Radke
* <tomsoft@informatik.tu-chemnitz.de>
*
* hacked by Andi Kleen for x86-64.
*
* $Id: hw_irq.h,v 1.24 2001/09/14 20:55:03 vojtech Exp $
*/
#ifndef __ASSEMBLY__
#include <linux/config.h>
#include <asm/atomic.h>
#include <asm/irq.h>
#include <linux/profile.h>
#include <linux/smp.h>
struct hw_interrupt_type;
#endif
#define NMI_VECTOR 0x02
/*
* IDT vectors usable for external interrupt sources start
* at 0x20:
*/
#define FIRST_EXTERNAL_VECTOR 0x20
#define IA32_SYSCALL_VECTOR 0x80
/*
* Vectors 0x20-0x2f are used for ISA interrupts.
*/
/*
* Special IRQ vectors used by the SMP architecture, 0xf0-0xff
*
* some of the following vectors are 'rare', they are merged
* into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
* TLB, reschedule and local APIC vectors are performance-critical.
*
* Vectors 0xf0-0xf9 are free (reserved for future Linux use).
*/
#define SPURIOUS_APIC_VECTOR 0xff
#define ERROR_APIC_VECTOR 0xfe
#define RESCHEDULE_VECTOR 0xfd
#define CALL_FUNCTION_VECTOR 0xfc
#define KDB_VECTOR 0xfb /* reserved for KDB */
#define THERMAL_APIC_VECTOR 0xfa
#define THRESHOLD_APIC_VECTOR 0xf9
#define INVALIDATE_TLB_VECTOR_END 0xf8
#define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f8 used for TLB flush */
#define NUM_INVALIDATE_TLB_VECTORS 8
/*
* Local APIC timer IRQ vector is on a different priority level,
* to work around the 'lost local interrupt if more than 2 IRQ
* sources per level' errata.
*/
#define LOCAL_TIMER_VECTOR 0xef
/*
* First APIC vector available to drivers: (vectors 0x30-0xee)
* we start at 0x31 to spread out vectors evenly between priority
* levels. (0x80 is the syscall vector)
*/
#define FIRST_DEVICE_VECTOR 0x31
#define FIRST_SYSTEM_VECTOR 0xef /* duplicated in irq.h */
#ifndef __ASSEMBLY__
extern u8 irq_vector[NR_IRQ_VECTORS];
#define IO_APIC_VECTOR(irq) (irq_vector[irq])
#define AUTO_ASSIGN -1
/*
* Various low-level irq details needed by irq.c, process.c,
* time.c, io_apic.c and smp.c
*
* Interrupt entry/exit code at both C and assembly level
*/
extern void disable_8259A_irq(unsigned int irq);
extern void enable_8259A_irq(unsigned int irq);
extern int i8259A_irq_pending(unsigned int irq);
extern void make_8259A_irq(unsigned int irq);
extern void init_8259A(int aeoi);
extern void FASTCALL(send_IPI_self(int vector));
extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
extern void print_IO_APIC(void);
extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
extern void send_IPI(int dest, int vector);
extern void setup_ioapic_dest(void);
extern unsigned long io_apic_irqs;
extern atomic_t irq_err_count;
extern atomic_t irq_mis_count;
#define IO_APIC_IRQ(x) (((x) >= 16) || ((1<<(x)) & io_apic_irqs))
#define __STR(x) #x
#define STR(x) __STR(x)
#include <asm/ptrace.h>
#define IRQ_NAME2(nr) nr##_interrupt(void)
#define IRQ_NAME(nr) IRQ_NAME2(IRQ##nr)
/*
* SMP has a few special interrupts for IPI messages
*/
#define BUILD_IRQ(nr) \
asmlinkage void IRQ_NAME(nr); \
__asm__( \
"\n.p2align\n" \
"IRQ" #nr "_interrupt:\n\t" \
"push $" #nr "-256 ; " \
"jmp common_interrupt");
#if defined(CONFIG_X86_IO_APIC)
static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) {
if (IO_APIC_IRQ(i))
send_IPI_self(IO_APIC_VECTOR(i));
}
#else
static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) {}
#endif
#define platform_legacy_irq(irq) ((irq) < 16)
#endif
#endif /* _ASM_HW_IRQ_H */