227 lines
11 KiB
ReStructuredText
227 lines
11 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
===============
|
|
Core Scheduling
|
|
===============
|
|
Core scheduling support allows userspace to define groups of tasks that can
|
|
share a core. These groups can be specified either for security usecases (one
|
|
group of tasks don't trust another), or for performance usecases (some
|
|
workloads may benefit from running on the same core as they don't need the same
|
|
hardware resources of the shared core, or may prefer different cores if they
|
|
do share hardware resource needs). This document only describes the security
|
|
usecase.
|
|
|
|
Security usecase
|
|
----------------
|
|
A cross-HT attack involves the attacker and victim running on different Hyper
|
|
Threads of the same core. MDS and L1TF are examples of such attacks. The only
|
|
full mitigation of cross-HT attacks is to disable Hyper Threading (HT). Core
|
|
scheduling is a scheduler feature that can mitigate some (not all) cross-HT
|
|
attacks. It allows HT to be turned on safely by ensuring that only tasks in a
|
|
user-designated trusted group can share a core. This increase in core sharing
|
|
can also improve performance, however it is not guaranteed that performance
|
|
will always improve, though that is seen to be the case with a number of real
|
|
world workloads. In theory, core scheduling aims to perform at least as good as
|
|
when Hyper Threading is disabled. In practice, this is mostly the case though
|
|
not always: as synchronizing scheduling decisions across 2 or more CPUs in a
|
|
core involves additional overhead - especially when the system is lightly
|
|
loaded. When ``total_threads <= N_CPUS/2``, the extra overhead may cause core
|
|
scheduling to perform more poorly compared to SMT-disabled, where N_CPUS is the
|
|
total number of CPUs. Please measure the performance of your workloads always.
|
|
|
|
Usage
|
|
-----
|
|
Core scheduling support is enabled via the ``CONFIG_SCHED_CORE`` config option.
|
|
Using this feature, userspace defines groups of tasks that can be co-scheduled
|
|
on the same core. The core scheduler uses this information to make sure that
|
|
tasks that are not in the same group never run simultaneously on a core, while
|
|
doing its best to satisfy the system's scheduling requirements.
|
|
|
|
Core scheduling can be enabled via the ``PR_SCHED_CORE`` prctl interface.
|
|
This interface provides support for the creation of core scheduling groups, as
|
|
well as admission and removal of tasks from created groups::
|
|
|
|
#include <sys/prctl.h>
|
|
|
|
int prctl(int option, unsigned long arg2, unsigned long arg3,
|
|
unsigned long arg4, unsigned long arg5);
|
|
|
|
option:
|
|
``PR_SCHED_CORE``
|
|
|
|
arg2:
|
|
Command for operation, must be one off:
|
|
|
|
- ``PR_SCHED_CORE_GET`` -- get core_sched cookie of ``pid``.
|
|
- ``PR_SCHED_CORE_CREATE`` -- create a new unique cookie for ``pid``.
|
|
- ``PR_SCHED_CORE_SHARE_TO`` -- push core_sched cookie to ``pid``.
|
|
- ``PR_SCHED_CORE_SHARE_FROM`` -- pull core_sched cookie from ``pid``.
|
|
|
|
arg3:
|
|
``pid`` of the task for which the operation applies.
|
|
|
|
arg4:
|
|
``pid_type`` for which the operation applies. It is one of
|
|
``PR_SCHED_CORE_SCOPE_``-prefixed macro constants. For example, if arg4
|
|
is ``PR_SCHED_CORE_SCOPE_THREAD_GROUP``, then the operation of this command
|
|
will be performed for all tasks in the task group of ``pid``.
|
|
|
|
arg5:
|
|
userspace pointer to an unsigned long long for storing the cookie returned
|
|
by ``PR_SCHED_CORE_GET`` command. Should be 0 for all other commands.
|
|
|
|
In order for a process to push a cookie to, or pull a cookie from a process, it
|
|
is required to have the ptrace access mode: `PTRACE_MODE_READ_REALCREDS` to the
|
|
process.
|
|
|
|
Building hierarchies of tasks
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
The simplest way to build hierarchies of threads/processes which share a
|
|
cookie and thus a core is to rely on the fact that the core-sched cookie is
|
|
inherited across forks/clones and execs, thus setting a cookie for the
|
|
'initial' script/executable/daemon will place every spawned child in the
|
|
same core-sched group.
|
|
|
|
Cookie Transferral
|
|
~~~~~~~~~~~~~~~~~~
|
|
Transferring a cookie between the current and other tasks is possible using
|
|
PR_SCHED_CORE_SHARE_FROM and PR_SCHED_CORE_SHARE_TO to inherit a cookie from a
|
|
specified task or a share a cookie with a task. In combination this allows a
|
|
simple helper program to pull a cookie from a task in an existing core
|
|
scheduling group and share it with already running tasks.
|
|
|
|
Design/Implementation
|
|
---------------------
|
|
Each task that is tagged is assigned a cookie internally in the kernel. As
|
|
mentioned in `Usage`_, tasks with the same cookie value are assumed to trust
|
|
each other and share a core.
|
|
|
|
The basic idea is that, every schedule event tries to select tasks for all the
|
|
siblings of a core such that all the selected tasks running on a core are
|
|
trusted (same cookie) at any point in time. Kernel threads are assumed trusted.
|
|
The idle task is considered special, as it trusts everything and everything
|
|
trusts it.
|
|
|
|
During a schedule() event on any sibling of a core, the highest priority task on
|
|
the sibling's core is picked and assigned to the sibling calling schedule(), if
|
|
the sibling has the task enqueued. For rest of the siblings in the core,
|
|
highest priority task with the same cookie is selected if there is one runnable
|
|
in their individual run queues. If a task with same cookie is not available,
|
|
the idle task is selected. Idle task is globally trusted.
|
|
|
|
Once a task has been selected for all the siblings in the core, an IPI is sent to
|
|
siblings for whom a new task was selected. Siblings on receiving the IPI will
|
|
switch to the new task immediately. If an idle task is selected for a sibling,
|
|
then the sibling is considered to be in a `forced idle` state. I.e., it may
|
|
have tasks on its on runqueue to run, however it will still have to run idle.
|
|
More on this in the next section.
|
|
|
|
Forced-idling of hyperthreads
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
The scheduler tries its best to find tasks that trust each other such that all
|
|
tasks selected to be scheduled are of the highest priority in a core. However,
|
|
it is possible that some runqueues had tasks that were incompatible with the
|
|
highest priority ones in the core. Favoring security over fairness, one or more
|
|
siblings could be forced to select a lower priority task if the highest
|
|
priority task is not trusted with respect to the core wide highest priority
|
|
task. If a sibling does not have a trusted task to run, it will be forced idle
|
|
by the scheduler (idle thread is scheduled to run).
|
|
|
|
When the highest priority task is selected to run, a reschedule-IPI is sent to
|
|
the sibling to force it into idle. This results in 4 cases which need to be
|
|
considered depending on whether a VM or a regular usermode process was running
|
|
on either HT::
|
|
|
|
HT1 (attack) HT2 (victim)
|
|
A idle -> user space user space -> idle
|
|
B idle -> user space guest -> idle
|
|
C idle -> guest user space -> idle
|
|
D idle -> guest guest -> idle
|
|
|
|
Note that for better performance, we do not wait for the destination CPU
|
|
(victim) to enter idle mode. This is because the sending of the IPI would bring
|
|
the destination CPU immediately into kernel mode from user space, or VMEXIT
|
|
in the case of guests. At best, this would only leak some scheduler metadata
|
|
which may not be worth protecting. It is also possible that the IPI is received
|
|
too late on some architectures, but this has not been observed in the case of
|
|
x86.
|
|
|
|
Trust model
|
|
~~~~~~~~~~~
|
|
Core scheduling maintains trust relationships amongst groups of tasks by
|
|
assigning them a tag that is the same cookie value.
|
|
When a system with core scheduling boots, all tasks are considered to trust
|
|
each other. This is because the core scheduler does not have information about
|
|
trust relationships until userspace uses the above mentioned interfaces, to
|
|
communicate them. In other words, all tasks have a default cookie value of 0.
|
|
and are considered system-wide trusted. The forced-idling of siblings running
|
|
cookie-0 tasks is also avoided.
|
|
|
|
Once userspace uses the above mentioned interfaces to group sets of tasks, tasks
|
|
within such groups are considered to trust each other, but do not trust those
|
|
outside. Tasks outside the group also don't trust tasks within.
|
|
|
|
Limitations of core-scheduling
|
|
------------------------------
|
|
Core scheduling tries to guarantee that only trusted tasks run concurrently on a
|
|
core. But there could be small window of time during which untrusted tasks run
|
|
concurrently or kernel could be running concurrently with a task not trusted by
|
|
kernel.
|
|
|
|
IPI processing delays
|
|
~~~~~~~~~~~~~~~~~~~~~
|
|
Core scheduling selects only trusted tasks to run together. IPI is used to notify
|
|
the siblings to switch to the new task. But there could be hardware delays in
|
|
receiving of the IPI on some arch (on x86, this has not been observed). This may
|
|
cause an attacker task to start running on a CPU before its siblings receive the
|
|
IPI. Even though cache is flushed on entry to user mode, victim tasks on siblings
|
|
may populate data in the cache and micro architectural buffers after the attacker
|
|
starts to run and this is a possibility for data leak.
|
|
|
|
Open cross-HT issues that core scheduling does not solve
|
|
--------------------------------------------------------
|
|
1. For MDS
|
|
~~~~~~~~~~
|
|
Core scheduling cannot protect against MDS attacks between the siblings
|
|
running in user mode and the others running in kernel mode. Even though all
|
|
siblings run tasks which trust each other, when the kernel is executing
|
|
code on behalf of a task, it cannot trust the code running in the
|
|
sibling. Such attacks are possible for any combination of sibling CPU modes
|
|
(host or guest mode).
|
|
|
|
2. For L1TF
|
|
~~~~~~~~~~~
|
|
Core scheduling cannot protect against an L1TF guest attacker exploiting a
|
|
guest or host victim. This is because the guest attacker can craft invalid
|
|
PTEs which are not inverted due to a vulnerable guest kernel. The only
|
|
solution is to disable EPT (Extended Page Tables).
|
|
|
|
For both MDS and L1TF, if the guest vCPU is configured to not trust each
|
|
other (by tagging separately), then the guest to guest attacks would go away.
|
|
Or it could be a system admin policy which considers guest to guest attacks as
|
|
a guest problem.
|
|
|
|
Another approach to resolve these would be to make every untrusted task on the
|
|
system to not trust every other untrusted task. While this could reduce
|
|
parallelism of the untrusted tasks, it would still solve the above issues while
|
|
allowing system processes (trusted tasks) to share a core.
|
|
|
|
3. Protecting the kernel (IRQ, syscall, VMEXIT)
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
Unfortunately, core scheduling does not protect kernel contexts running on
|
|
sibling hyperthreads from one another. Prototypes of mitigations have been posted
|
|
to LKML to solve this, but it is debatable whether such windows are practically
|
|
exploitable, and whether the performance overhead of the prototypes are worth
|
|
it (not to mention, the added code complexity).
|
|
|
|
Other Use cases
|
|
---------------
|
|
The main use case for Core scheduling is mitigating the cross-HT vulnerabilities
|
|
with SMT enabled. There are other use cases where this feature could be used:
|
|
|
|
- Isolating tasks that needs a whole core: Examples include realtime tasks, tasks
|
|
that uses SIMD instructions etc.
|
|
- Gang scheduling: Requirements for a group of tasks that needs to be scheduled
|
|
together could also be realized using core scheduling. One example is vCPUs of
|
|
a VM.
|