168 lines
6.3 KiB
Plaintext
168 lines
6.3 KiB
Plaintext
Netdev features mess and how to get out from it alive
|
|
=====================================================
|
|
|
|
Author:
|
|
Michał Mirosław <mirq-linux@rere.qmqm.pl>
|
|
|
|
|
|
|
|
Part I: Feature sets
|
|
======================
|
|
|
|
Long gone are the days when a network card would just take and give packets
|
|
verbatim. Today's devices add multiple features and bugs (read: offloads)
|
|
that relieve an OS of various tasks like generating and checking checksums,
|
|
splitting packets, classifying them. Those capabilities and their state
|
|
are commonly referred to as netdev features in Linux kernel world.
|
|
|
|
There are currently three sets of features relevant to the driver, and
|
|
one used internally by network core:
|
|
|
|
1. netdev->hw_features set contains features whose state may possibly
|
|
be changed (enabled or disabled) for a particular device by user's
|
|
request. This set should be initialized in ndo_init callback and not
|
|
changed later.
|
|
|
|
2. netdev->features set contains features which are currently enabled
|
|
for a device. This should be changed only by network core or in
|
|
error paths of ndo_set_features callback.
|
|
|
|
3. netdev->vlan_features set contains features whose state is inherited
|
|
by child VLAN devices (limits netdev->features set). This is currently
|
|
used for all VLAN devices whether tags are stripped or inserted in
|
|
hardware or software.
|
|
|
|
4. netdev->wanted_features set contains feature set requested by user.
|
|
This set is filtered by ndo_fix_features callback whenever it or
|
|
some device-specific conditions change. This set is internal to
|
|
networking core and should not be referenced in drivers.
|
|
|
|
|
|
|
|
Part II: Controlling enabled features
|
|
=======================================
|
|
|
|
When current feature set (netdev->features) is to be changed, new set
|
|
is calculated and filtered by calling ndo_fix_features callback
|
|
and netdev_fix_features(). If the resulting set differs from current
|
|
set, it is passed to ndo_set_features callback and (if the callback
|
|
returns success) replaces value stored in netdev->features.
|
|
NETDEV_FEAT_CHANGE notification is issued after that whenever current
|
|
set might have changed.
|
|
|
|
The following events trigger recalculation:
|
|
1. device's registration, after ndo_init returned success
|
|
2. user requested changes in features state
|
|
3. netdev_update_features() is called
|
|
|
|
ndo_*_features callbacks are called with rtnl_lock held. Missing callbacks
|
|
are treated as always returning success.
|
|
|
|
A driver that wants to trigger recalculation must do so by calling
|
|
netdev_update_features() while holding rtnl_lock. This should not be done
|
|
from ndo_*_features callbacks. netdev->features should not be modified by
|
|
driver except by means of ndo_fix_features callback.
|
|
|
|
|
|
|
|
Part III: Implementation hints
|
|
================================
|
|
|
|
* ndo_fix_features:
|
|
|
|
All dependencies between features should be resolved here. The resulting
|
|
set can be reduced further by networking core imposed limitations (as coded
|
|
in netdev_fix_features()). For this reason it is safer to disable a feature
|
|
when its dependencies are not met instead of forcing the dependency on.
|
|
|
|
This callback should not modify hardware nor driver state (should be
|
|
stateless). It can be called multiple times between successive
|
|
ndo_set_features calls.
|
|
|
|
Callback must not alter features contained in NETIF_F_SOFT_FEATURES or
|
|
NETIF_F_NEVER_CHANGE sets. The exception is NETIF_F_VLAN_CHALLENGED but
|
|
care must be taken as the change won't affect already configured VLANs.
|
|
|
|
* ndo_set_features:
|
|
|
|
Hardware should be reconfigured to match passed feature set. The set
|
|
should not be altered unless some error condition happens that can't
|
|
be reliably detected in ndo_fix_features. In this case, the callback
|
|
should update netdev->features to match resulting hardware state.
|
|
Errors returned are not (and cannot be) propagated anywhere except dmesg.
|
|
(Note: successful return is zero, >0 means silent error.)
|
|
|
|
|
|
|
|
Part IV: Features
|
|
===================
|
|
|
|
For current list of features, see include/linux/netdev_features.h.
|
|
This section describes semantics of some of them.
|
|
|
|
* Transmit checksumming
|
|
|
|
For complete description, see comments near the top of include/linux/skbuff.h.
|
|
|
|
Note: NETIF_F_HW_CSUM is a superset of NETIF_F_IP_CSUM + NETIF_F_IPV6_CSUM.
|
|
It means that device can fill TCP/UDP-like checksum anywhere in the packets
|
|
whatever headers there might be.
|
|
|
|
* Transmit TCP segmentation offload
|
|
|
|
NETIF_F_TSO_ECN means that hardware can properly split packets with CWR bit
|
|
set, be it TCPv4 (when NETIF_F_TSO is enabled) or TCPv6 (NETIF_F_TSO6).
|
|
|
|
* Transmit DMA from high memory
|
|
|
|
On platforms where this is relevant, NETIF_F_HIGHDMA signals that
|
|
ndo_start_xmit can handle skbs with frags in high memory.
|
|
|
|
* Transmit scatter-gather
|
|
|
|
Those features say that ndo_start_xmit can handle fragmented skbs:
|
|
NETIF_F_SG --- paged skbs (skb_shinfo()->frags), NETIF_F_FRAGLIST ---
|
|
chained skbs (skb->next/prev list).
|
|
|
|
* Software features
|
|
|
|
Features contained in NETIF_F_SOFT_FEATURES are features of networking
|
|
stack. Driver should not change behaviour based on them.
|
|
|
|
* LLTX driver (deprecated for hardware drivers)
|
|
|
|
NETIF_F_LLTX should be set in drivers that implement their own locking in
|
|
transmit path or don't need locking at all (e.g. software tunnels).
|
|
In ndo_start_xmit, it is recommended to use a try_lock and return
|
|
NETDEV_TX_LOCKED when the spin lock fails. The locking should also properly
|
|
protect against other callbacks (the rules you need to find out).
|
|
|
|
Don't use it for new drivers.
|
|
|
|
* netns-local device
|
|
|
|
NETIF_F_NETNS_LOCAL is set for devices that are not allowed to move between
|
|
network namespaces (e.g. loopback).
|
|
|
|
Don't use it in drivers.
|
|
|
|
* VLAN challenged
|
|
|
|
NETIF_F_VLAN_CHALLENGED should be set for devices which can't cope with VLAN
|
|
headers. Some drivers set this because the cards can't handle the bigger MTU.
|
|
[FIXME: Those cases could be fixed in VLAN code by allowing only reduced-MTU
|
|
VLANs. This may be not useful, though.]
|
|
|
|
* rx-fcs
|
|
|
|
This requests that the NIC append the Ethernet Frame Checksum (FCS)
|
|
to the end of the skb data. This allows sniffers and other tools to
|
|
read the CRC recorded by the NIC on receipt of the packet.
|
|
|
|
* rx-all
|
|
|
|
This requests that the NIC receive all possible frames, including errored
|
|
frames (such as bad FCS, etc). This can be helpful when sniffing a link with
|
|
bad packets on it. Some NICs may receive more packets if also put into normal
|
|
PROMISC mode.
|