55 lines
2.0 KiB
Plaintext
55 lines
2.0 KiB
Plaintext
What: /sys/bus/platform/devices/INTC1092:00/intc_reg
|
|
Date: August 2021
|
|
KernelVersion: 5.15
|
|
Contact: Shravan S <s.shravan@intel.com>,
|
|
An Sudhakar <sudhakar.an@intel.com>
|
|
Description:
|
|
Specific Absorption Rate (SAR) regulatory mode is typically
|
|
derived based on information like mcc (Mobile Country Code) and
|
|
mnc (Mobile Network Code) that is available for the currently
|
|
attached LTE network. A userspace application is required to set
|
|
the current SAR regulatory mode on the Dynamic SAR driver using
|
|
this sysfs node. Such an application can also read back using
|
|
this sysfs node, the currently configured regulatory mode value
|
|
from the Dynamic SAR driver.
|
|
|
|
Acceptable regulatory modes are:
|
|
== ====
|
|
0 FCC
|
|
1 CE
|
|
2 ISED
|
|
== ====
|
|
|
|
- The regulatory mode value has one of the above values.
|
|
- The default regulatory mode used in the driver is 0.
|
|
|
|
What: /sys/bus/platform/devices/INTC1092:00/intc_data
|
|
Date: August 2021
|
|
KernelVersion: 5.15
|
|
Contact: Shravan S <s.shravan@intel.com>,
|
|
An Sudhakar <sudhakar.an@intel.com>
|
|
Description:
|
|
This sysfs entry is used to retrieve Dynamic SAR information
|
|
emitted/maintained by a BIOS that supports Dynamic SAR.
|
|
|
|
The retrieved information is in the order given below:
|
|
- device_mode
|
|
- bandtable_index
|
|
- antennatable_index
|
|
- sartable_index
|
|
|
|
The above information is sent as integer values separated
|
|
by a single space. This information can then be pushed to a
|
|
WWAN modem that uses this to control the transmit signal
|
|
level using the Band/Antenna/SAR table index information.
|
|
These parameters are derived/decided by aggregating
|
|
device-mode like laptop/tablet/clamshell etc. and the
|
|
proximity-sensor data available to the embedded controller on
|
|
given host. The regulatory mode configured on Dynamic SAR
|
|
driver also influences these values.
|
|
|
|
The userspace applications can poll for changes to this file
|
|
using POLLPRI event on file-descriptor (fd) obtained by opening
|
|
this sysfs entry. Application can then read this information from
|
|
the sysfs node and consume the given information.
|