303 lines
7.4 KiB
C
303 lines
7.4 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* motu-protocol-v2.c - a part of driver for MOTU FireWire series
|
|
*
|
|
* Copyright (c) 2015-2017 Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
*/
|
|
|
|
#include "motu.h"
|
|
|
|
#define V2_CLOCK_STATUS_OFFSET 0x0b14
|
|
#define V2_CLOCK_RATE_MASK 0x00000038
|
|
#define V2_CLOCK_RATE_SHIFT 3
|
|
#define V2_CLOCK_SRC_MASK 0x00000007
|
|
#define V2_CLOCK_SRC_SHIFT 0
|
|
#define V2_CLOCK_FETCH_ENABLE 0x02000000
|
|
#define V2_CLOCK_MODEL_SPECIFIC 0x04000000
|
|
|
|
#define V2_IN_OUT_CONF_OFFSET 0x0c04
|
|
#define V2_OPT_OUT_IFACE_MASK 0x00000c00
|
|
#define V2_OPT_OUT_IFACE_SHIFT 10
|
|
#define V2_OPT_IN_IFACE_MASK 0x00000300
|
|
#define V2_OPT_IN_IFACE_SHIFT 8
|
|
#define V2_OPT_IFACE_MODE_NONE 0
|
|
#define V2_OPT_IFACE_MODE_ADAT 1
|
|
#define V2_OPT_IFACE_MODE_SPDIF 2
|
|
|
|
static int get_clock_rate(u32 data, unsigned int *rate)
|
|
{
|
|
unsigned int index = (data & V2_CLOCK_RATE_MASK) >> V2_CLOCK_RATE_SHIFT;
|
|
if (index >= ARRAY_SIZE(snd_motu_clock_rates))
|
|
return -EIO;
|
|
|
|
*rate = snd_motu_clock_rates[index];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int v2_get_clock_rate(struct snd_motu *motu, unsigned int *rate)
|
|
{
|
|
__be32 reg;
|
|
int err;
|
|
|
|
err = snd_motu_transaction_read(motu, V2_CLOCK_STATUS_OFFSET, ®,
|
|
sizeof(reg));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return get_clock_rate(be32_to_cpu(reg), rate);
|
|
}
|
|
|
|
static int v2_set_clock_rate(struct snd_motu *motu, unsigned int rate)
|
|
{
|
|
__be32 reg;
|
|
u32 data;
|
|
int i;
|
|
int err;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(snd_motu_clock_rates); ++i) {
|
|
if (snd_motu_clock_rates[i] == rate)
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(snd_motu_clock_rates))
|
|
return -EINVAL;
|
|
|
|
err = snd_motu_transaction_read(motu, V2_CLOCK_STATUS_OFFSET, ®,
|
|
sizeof(reg));
|
|
if (err < 0)
|
|
return err;
|
|
data = be32_to_cpu(reg);
|
|
|
|
data &= ~V2_CLOCK_RATE_MASK;
|
|
data |= i << V2_CLOCK_RATE_SHIFT;
|
|
|
|
reg = cpu_to_be32(data);
|
|
return snd_motu_transaction_write(motu, V2_CLOCK_STATUS_OFFSET, ®,
|
|
sizeof(reg));
|
|
}
|
|
|
|
static int get_clock_source(struct snd_motu *motu, u32 data,
|
|
enum snd_motu_clock_source *src)
|
|
{
|
|
unsigned int index = data & V2_CLOCK_SRC_MASK;
|
|
if (index > 5)
|
|
return -EIO;
|
|
|
|
switch (index) {
|
|
case 0:
|
|
*src = SND_MOTU_CLOCK_SOURCE_INTERNAL;
|
|
break;
|
|
case 1:
|
|
{
|
|
__be32 reg;
|
|
|
|
// To check the configuration of optical interface.
|
|
int err = snd_motu_transaction_read(motu, V2_IN_OUT_CONF_OFFSET,
|
|
®, sizeof(reg));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (be32_to_cpu(reg) & 0x00000200)
|
|
*src = SND_MOTU_CLOCK_SOURCE_SPDIF_ON_OPT;
|
|
else
|
|
*src = SND_MOTU_CLOCK_SOURCE_ADAT_ON_OPT;
|
|
break;
|
|
}
|
|
case 2:
|
|
*src = SND_MOTU_CLOCK_SOURCE_SPDIF_ON_COAX;
|
|
break;
|
|
case 3:
|
|
*src = SND_MOTU_CLOCK_SOURCE_SPH;
|
|
break;
|
|
case 4:
|
|
*src = SND_MOTU_CLOCK_SOURCE_WORD_ON_BNC;
|
|
break;
|
|
case 5:
|
|
*src = SND_MOTU_CLOCK_SOURCE_ADAT_ON_DSUB;
|
|
break;
|
|
default:
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int v2_get_clock_source(struct snd_motu *motu,
|
|
enum snd_motu_clock_source *src)
|
|
{
|
|
__be32 reg;
|
|
int err;
|
|
|
|
err = snd_motu_transaction_read(motu, V2_CLOCK_STATUS_OFFSET, ®,
|
|
sizeof(reg));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return get_clock_source(motu, be32_to_cpu(reg), src);
|
|
}
|
|
|
|
static int v2_switch_fetching_mode(struct snd_motu *motu, bool enable)
|
|
{
|
|
enum snd_motu_clock_source src;
|
|
__be32 reg;
|
|
u32 data;
|
|
int err = 0;
|
|
|
|
// 828mkII implements Altera ACEX 1K EP1K30. Nothing to do.
|
|
if (motu->spec == &snd_motu_spec_828mk2)
|
|
return 0;
|
|
|
|
err = snd_motu_transaction_read(motu, V2_CLOCK_STATUS_OFFSET, ®,
|
|
sizeof(reg));
|
|
if (err < 0)
|
|
return err;
|
|
data = be32_to_cpu(reg);
|
|
|
|
err = get_clock_source(motu, data, &src);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
data &= ~(V2_CLOCK_FETCH_ENABLE | V2_CLOCK_MODEL_SPECIFIC);
|
|
if (enable)
|
|
data |= V2_CLOCK_FETCH_ENABLE;
|
|
|
|
if (motu->spec->flags & SND_MOTU_SPEC_SUPPORT_CLOCK_X4) {
|
|
// Expected for Traveler and 896HD, which implements Altera
|
|
// Cyclone EP1C3.
|
|
data |= V2_CLOCK_MODEL_SPECIFIC;
|
|
} else {
|
|
// For UltraLite and 8pre, which implements Xilinx Spartan
|
|
// XC3S200.
|
|
unsigned int rate;
|
|
|
|
err = get_clock_rate(data, &rate);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (src == SND_MOTU_CLOCK_SOURCE_SPH && rate > 48000)
|
|
data |= V2_CLOCK_MODEL_SPECIFIC;
|
|
}
|
|
|
|
reg = cpu_to_be32(data);
|
|
return snd_motu_transaction_write(motu, V2_CLOCK_STATUS_OFFSET, ®,
|
|
sizeof(reg));
|
|
}
|
|
|
|
static void calculate_fixed_part(struct snd_motu_packet_format *formats,
|
|
enum amdtp_stream_direction dir,
|
|
enum snd_motu_spec_flags flags,
|
|
unsigned char analog_ports)
|
|
{
|
|
unsigned char pcm_chunks[3] = {0, 0, 0};
|
|
|
|
formats->msg_chunks = 2;
|
|
|
|
pcm_chunks[0] = analog_ports;
|
|
pcm_chunks[1] = analog_ports;
|
|
if (flags & SND_MOTU_SPEC_SUPPORT_CLOCK_X4)
|
|
pcm_chunks[2] = analog_ports;
|
|
|
|
if (dir == AMDTP_IN_STREAM) {
|
|
if (flags & SND_MOTU_SPEC_TX_MICINST_CHUNK) {
|
|
pcm_chunks[0] += 2;
|
|
pcm_chunks[1] += 2;
|
|
}
|
|
if (flags & SND_MOTU_SPEC_TX_RETURN_CHUNK) {
|
|
pcm_chunks[0] += 2;
|
|
pcm_chunks[1] += 2;
|
|
}
|
|
} else {
|
|
if (flags & SND_MOTU_SPEC_RX_SEPARATED_MAIN) {
|
|
pcm_chunks[0] += 2;
|
|
pcm_chunks[1] += 2;
|
|
}
|
|
|
|
// Packets to v2 units include 2 chunks for phone 1/2, except
|
|
// for 176.4/192.0 kHz.
|
|
pcm_chunks[0] += 2;
|
|
pcm_chunks[1] += 2;
|
|
}
|
|
|
|
if (flags & SND_MOTU_SPEC_HAS_AESEBU_IFACE) {
|
|
pcm_chunks[0] += 2;
|
|
pcm_chunks[1] += 2;
|
|
}
|
|
|
|
/*
|
|
* All of v2 models have a pair of coaxial interfaces for digital in/out
|
|
* port. At 44.1/48.0/88.2/96.0 kHz, packets includes PCM from these
|
|
* ports.
|
|
*/
|
|
pcm_chunks[0] += 2;
|
|
pcm_chunks[1] += 2;
|
|
|
|
formats->fixed_part_pcm_chunks[0] = pcm_chunks[0];
|
|
formats->fixed_part_pcm_chunks[1] = pcm_chunks[1];
|
|
formats->fixed_part_pcm_chunks[2] = pcm_chunks[2];
|
|
}
|
|
|
|
static void calculate_differed_part(struct snd_motu_packet_format *formats,
|
|
enum snd_motu_spec_flags flags,
|
|
u32 data, u32 mask, u32 shift)
|
|
{
|
|
unsigned char pcm_chunks[2] = {0, 0};
|
|
|
|
/*
|
|
* When optical interfaces are configured for S/PDIF (TOSLINK),
|
|
* the above PCM frames come from them, instead of coaxial
|
|
* interfaces.
|
|
*/
|
|
data = (data & mask) >> shift;
|
|
if (data == V2_OPT_IFACE_MODE_ADAT) {
|
|
if (flags & SND_MOTU_SPEC_HAS_OPT_IFACE_A) {
|
|
pcm_chunks[0] += 8;
|
|
pcm_chunks[1] += 4;
|
|
}
|
|
// 8pre has two sets of optical interface and doesn't reduce
|
|
// chunks for ADAT signals.
|
|
if (flags & SND_MOTU_SPEC_HAS_OPT_IFACE_B) {
|
|
pcm_chunks[1] += 4;
|
|
}
|
|
}
|
|
|
|
/* At mode x4, no data chunks are supported in this part. */
|
|
formats->differed_part_pcm_chunks[0] = pcm_chunks[0];
|
|
formats->differed_part_pcm_chunks[1] = pcm_chunks[1];
|
|
}
|
|
|
|
static int v2_cache_packet_formats(struct snd_motu *motu)
|
|
{
|
|
__be32 reg;
|
|
u32 data;
|
|
int err;
|
|
|
|
err = snd_motu_transaction_read(motu, V2_IN_OUT_CONF_OFFSET, ®,
|
|
sizeof(reg));
|
|
if (err < 0)
|
|
return err;
|
|
data = be32_to_cpu(reg);
|
|
|
|
calculate_fixed_part(&motu->tx_packet_formats, AMDTP_IN_STREAM,
|
|
motu->spec->flags, motu->spec->analog_in_ports);
|
|
calculate_differed_part(&motu->tx_packet_formats, motu->spec->flags,
|
|
data, V2_OPT_IN_IFACE_MASK, V2_OPT_IN_IFACE_SHIFT);
|
|
|
|
calculate_fixed_part(&motu->rx_packet_formats, AMDTP_OUT_STREAM,
|
|
motu->spec->flags, motu->spec->analog_out_ports);
|
|
calculate_differed_part(&motu->rx_packet_formats, motu->spec->flags,
|
|
data, V2_OPT_OUT_IFACE_MASK, V2_OPT_OUT_IFACE_SHIFT);
|
|
|
|
motu->tx_packet_formats.pcm_byte_offset = 10;
|
|
motu->rx_packet_formats.pcm_byte_offset = 10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
const struct snd_motu_protocol snd_motu_protocol_v2 = {
|
|
.get_clock_rate = v2_get_clock_rate,
|
|
.set_clock_rate = v2_set_clock_rate,
|
|
.get_clock_source = v2_get_clock_source,
|
|
.switch_fetching_mode = v2_switch_fetching_mode,
|
|
.cache_packet_formats = v2_cache_packet_formats,
|
|
};
|