original_kernel/drivers/media/pci/ivtv/Kconfig

78 lines
2.4 KiB
Plaintext

config VIDEO_IVTV
tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
depends on VIDEO_V4L2 && PCI && I2C
select I2C_ALGOBIT
depends on RC_CORE
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_CX2341X
select VIDEO_CX25840
select VIDEO_MSP3400
select VIDEO_SAA711X
select VIDEO_SAA717X
select VIDEO_SAA7127
select VIDEO_CS53L32A
select VIDEO_M52790
select VIDEO_WM8775
select VIDEO_WM8739
select VIDEO_VP27SMPX
select VIDEO_UPD64031A
select VIDEO_UPD64083
---help---
This is a video4linux driver for Conexant cx23416 or cx23415 based
PCI personal video recorder devices.
This is used in devices such as the Hauppauge PVR-150/250/350/500
cards. There is a driver homepage at <http://www.ivtvdriver.org>.
To compile this driver as a module, choose M here: the
module will be called ivtv.
config VIDEO_IVTV_DEPRECATED_IOCTLS
bool "enable the DVB ioctls abuse on ivtv driver"
depends on VIDEO_IVTV
default n
---help---
Enable the usage of the a DVB set of ioctls that were abused by
IVTV driver for a while.
Those ioctls were not needed for a long time, as IVTV implements
the proper V4L2 ioctls since kernel 3.3.
If unsure, say N.
config VIDEO_IVTV_ALSA
tristate "Conexant cx23415/cx23416 ALSA interface for PCM audio capture"
depends on VIDEO_IVTV && SND
select SND_PCM
---help---
This driver provides an ALSA interface as another method for user
applications to obtain PCM audio data from Conexant cx23415/cx23416
based PCI TV cards supported by the ivtv driver.
The ALSA interface has much wider use in user applications performing
PCM audio capture, than the V4L2 "/dev/video24" PCM audio interface
provided by the main ivtv driver.
To compile this driver as a module, choose M here: the
module will be called ivtv-alsa.
config VIDEO_FB_IVTV
tristate "Conexant cx23415 framebuffer support"
depends on VIDEO_IVTV && FB
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
---help---
This is a framebuffer driver for the Conexant cx23415 MPEG
encoder/decoder.
This is used in the Hauppauge PVR-350 card. There is a driver
homepage at <http://www.ivtvdriver.org>.
In order to use this module, you will need to boot with PAT disabled
on x86 systems, using the nopat kernel parameter.
To compile this driver as a module, choose M here: the
module will be called ivtvfb.