80 lines
1.7 KiB
Plaintext
80 lines
1.7 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
/*
|
|
* Copyright 2018 Alexander Monakov <amonakov@gmail.com>
|
|
*/
|
|
/dts-v1/;
|
|
|
|
#include "berlin2cd.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "Valve Steam Link";
|
|
compatible = "valve,steamlink", "marvell,berlin2cd", "marvell,berlin";
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x20000000>; /* 512 MB */
|
|
};
|
|
|
|
gpio-restart {
|
|
compatible = "gpio-restart";
|
|
gpios = <&porta 6 GPIO_ACTIVE_HIGH>;
|
|
active-delay = <100>;
|
|
inactive-delay = <10>;
|
|
wait-delay = <100>;
|
|
priority = <200>;
|
|
};
|
|
};
|
|
|
|
&cpu {
|
|
cpu-supply = <&vcpu>;
|
|
operating-points = <
|
|
/* kHz uV */
|
|
1000000 1325000
|
|
>;
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
/* There are two regulators on the board. One is accessible via I2C,
|
|
* with buck1 providing SoC power (set up by bootloader to 1.325V or
|
|
* less depending on leakage value in OTP), and buck2 likely used for
|
|
* DRAM (providing 1.35V). The other regulator on the opposite side
|
|
* of the board is probably supplying SDIO and NAND fixed voltages. */
|
|
regulator@19 {
|
|
compatible = "marvell,88pg868";
|
|
reg = <0x19>;
|
|
|
|
vcpu: buck1 {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1325000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* Fixed interface to on-board Marvell 8897 Wi-Fi/Bluetooth/NFC chip. */
|
|
&sdhci0 {
|
|
keep-power-in-suspend;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
/* RX/TX are routed to TP50/TP51 on the board. */
|
|
status = "okay";
|
|
};
|
|
|
|
/* The SoC is connected to on-board USB hub that in turn has one downstream
|
|
* port wired to the on-board Steam Controller wireless receiver chip. */
|
|
&usb_phy1 { status = "okay"; };
|
|
|
|
&usb1 {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
ð1 { status = "okay"; };
|