original_kernel/arch/mips/jmr3927/rbhma3100/irq.c

171 lines
5.1 KiB
C

/*
* Copyright 2001 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
* ahennessy@mvista.com
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2000-2001 Toshiba Corporation
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/jmr3927/jmr3927.h>
#if JMR3927_IRQ_END > NR_IRQS
#error JMR3927_IRQ_END > NR_IRQS
#endif
static unsigned char irc_level[TX3927_NUM_IR] = {
5, 5, 5, 5, 5, 5, /* INT[5:0] */
7, 7, /* SIO */
5, 5, 5, 0, 0, /* DMA, PIO, PCI */
6, 6, 6 /* TMR */
};
/*
* CP0_STATUS is a thread's resource (saved/restored on context switch).
* So disable_irq/enable_irq MUST handle IOC/IRC registers.
*/
static void mask_irq_ioc(unsigned int irq)
{
/* 0: mask */
unsigned int irq_nr = irq - JMR3927_IRQ_IOC;
unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR);
unsigned int bit = 1 << irq_nr;
jmr3927_ioc_reg_out(imask & ~bit, JMR3927_IOC_INTM_ADDR);
/* flush write buffer */
(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
}
static void unmask_irq_ioc(unsigned int irq)
{
/* 0: mask */
unsigned int irq_nr = irq - JMR3927_IRQ_IOC;
unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR);
unsigned int bit = 1 << irq_nr;
jmr3927_ioc_reg_out(imask | bit, JMR3927_IOC_INTM_ADDR);
/* flush write buffer */
(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
}
asmlinkage void plat_irq_dispatch(void)
{
unsigned long cp0_cause = read_c0_cause();
int irq;
if ((cp0_cause & CAUSEF_IP7) == 0)
return;
irq = (cp0_cause >> CAUSEB_IP2) & 0x0f;
do_IRQ(irq + JMR3927_IRQ_IRC);
}
static irqreturn_t jmr3927_ioc_interrupt(int irq, void *dev_id)
{
unsigned char istat = jmr3927_ioc_reg_in(JMR3927_IOC_INTS2_ADDR);
int i;
for (i = 0; i < JMR3927_NR_IRQ_IOC; i++) {
if (istat & (1 << i)) {
irq = JMR3927_IRQ_IOC + i;
do_IRQ(irq);
}
}
return IRQ_HANDLED;
}
static struct irqaction ioc_action = {
jmr3927_ioc_interrupt, 0, CPU_MASK_NONE, "IOC", NULL, NULL,
};
static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id)
{
printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
return IRQ_HANDLED;
}
static struct irqaction pcierr_action = {
jmr3927_pcierr_interrupt, 0, CPU_MASK_NONE, "PCI error", NULL, NULL,
};
static void __init jmr3927_irq_init(void);
void __init arch_init_irq(void)
{
/* Now, interrupt control disabled, */
/* all IRC interrupts are masked, */
/* all IRC interrupt mode are Low Active. */
/* mask all IOC interrupts */
jmr3927_ioc_reg_out(0, JMR3927_IOC_INTM_ADDR);
/* setup IOC interrupt mode (SOFT:High Active, Others:Low Active) */
jmr3927_ioc_reg_out(JMR3927_IOC_INTF_SOFT, JMR3927_IOC_INTP_ADDR);
/* clear PCI Soft interrupts */
jmr3927_ioc_reg_out(0, JMR3927_IOC_INTS1_ADDR);
/* clear PCI Reset interrupts */
jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
jmr3927_irq_init();
/* setup IOC interrupt 1 (PCI, MODEM) */
setup_irq(JMR3927_IRQ_IOCINT, &ioc_action);
#ifdef CONFIG_PCI
setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action);
#endif
/* enable all CPU interrupt bits. */
set_c0_status(ST0_IM); /* IE bit is still 0. */
}
static struct irq_chip jmr3927_irq_ioc = {
.name = "jmr3927_ioc",
.ack = mask_irq_ioc,
.mask = mask_irq_ioc,
.mask_ack = mask_irq_ioc,
.unmask = unmask_irq_ioc,
};
static void __init jmr3927_irq_init(void)
{
u32 i;
txx9_irq_init(TX3927_IRC_REG);
for (i = 0; i < TXx9_MAX_IR; i++)
txx9_irq_set_pri(i, irc_level[i]);
for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
}