1284 lines
38 KiB
C
1284 lines
38 KiB
C
/*
|
|
* Simple synchronous serial port driver for ETRAX FS.
|
|
*
|
|
* Copyright (c) 2005 Axis Communications AB
|
|
*
|
|
* Author: Mikael Starvik
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/config.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/major.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/init.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/arch/dma.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch/hwregs/reg_rdwr.h>
|
|
#include <asm/arch/hwregs/sser_defs.h>
|
|
#include <asm/arch/hwregs/dma_defs.h>
|
|
#include <asm/arch/hwregs/dma.h>
|
|
#include <asm/arch/hwregs/intr_vect_defs.h>
|
|
#include <asm/arch/hwregs/intr_vect.h>
|
|
#include <asm/arch/hwregs/reg_map.h>
|
|
#include <asm/sync_serial.h>
|
|
|
|
/* The receiver is a bit tricky beacuse of the continuous stream of data.*/
|
|
/* */
|
|
/* Three DMA descriptors are linked together. Each DMA descriptor is */
|
|
/* responsible for port->bufchunk of a common buffer. */
|
|
/* */
|
|
/* +---------------------------------------------+ */
|
|
/* | +----------+ +----------+ +----------+ | */
|
|
/* +-> | Descr[0] |-->| Descr[1] |-->| Descr[2] |-+ */
|
|
/* +----------+ +----------+ +----------+ */
|
|
/* | | | */
|
|
/* v v v */
|
|
/* +-------------------------------------+ */
|
|
/* | BUFFER | */
|
|
/* +-------------------------------------+ */
|
|
/* |<- data_avail ->| */
|
|
/* readp writep */
|
|
/* */
|
|
/* If the application keeps up the pace readp will be right after writep.*/
|
|
/* If the application can't keep the pace we have to throw away data. */
|
|
/* The idea is that readp should be ready with the data pointed out by */
|
|
/* Descr[i] when the DMA has filled in Descr[i+1]. */
|
|
/* Otherwise we will discard */
|
|
/* the rest of the data pointed out by Descr1 and set readp to the start */
|
|
/* of Descr2 */
|
|
|
|
#define SYNC_SERIAL_MAJOR 125
|
|
|
|
/* IN_BUFFER_SIZE should be a multiple of 6 to make sure that 24 bit */
|
|
/* words can be handled */
|
|
#define IN_BUFFER_SIZE 12288
|
|
#define IN_DESCR_SIZE 256
|
|
#define NUM_IN_DESCR (IN_BUFFER_SIZE/IN_DESCR_SIZE)
|
|
#define OUT_BUFFER_SIZE 4096
|
|
|
|
#define DEFAULT_FRAME_RATE 0
|
|
#define DEFAULT_WORD_RATE 7
|
|
|
|
/* NOTE: Enabling some debug will likely cause overrun or underrun,
|
|
* especially if manual mode is use.
|
|
*/
|
|
#define DEBUG(x)
|
|
#define DEBUGREAD(x)
|
|
#define DEBUGWRITE(x)
|
|
#define DEBUGPOLL(x)
|
|
#define DEBUGRXINT(x)
|
|
#define DEBUGTXINT(x)
|
|
|
|
typedef struct sync_port
|
|
{
|
|
reg_scope_instances regi_sser;
|
|
reg_scope_instances regi_dmain;
|
|
reg_scope_instances regi_dmaout;
|
|
|
|
char started; /* 1 if port has been started */
|
|
char port_nbr; /* Port 0 or 1 */
|
|
char busy; /* 1 if port is busy */
|
|
|
|
char enabled; /* 1 if port is enabled */
|
|
char use_dma; /* 1 if port uses dma */
|
|
char tr_running;
|
|
|
|
char init_irqs;
|
|
int output;
|
|
int input;
|
|
|
|
volatile unsigned int out_count; /* Remaining bytes for current transfer */
|
|
unsigned char* outp; /* Current position in out_buffer */
|
|
volatile unsigned char* volatile readp; /* Next byte to be read by application */
|
|
volatile unsigned char* volatile writep; /* Next byte to be written by etrax */
|
|
unsigned int in_buffer_size;
|
|
unsigned int inbufchunk;
|
|
unsigned char out_buffer[OUT_BUFFER_SIZE] __attribute__ ((aligned(32)));
|
|
unsigned char in_buffer[IN_BUFFER_SIZE]__attribute__ ((aligned(32)));
|
|
unsigned char flip[IN_BUFFER_SIZE] __attribute__ ((aligned(32)));
|
|
struct dma_descr_data* next_rx_desc;
|
|
struct dma_descr_data* prev_rx_desc;
|
|
int full;
|
|
|
|
dma_descr_data in_descr[NUM_IN_DESCR] __attribute__ ((__aligned__(16)));
|
|
dma_descr_context in_context __attribute__ ((__aligned__(32)));
|
|
dma_descr_data out_descr __attribute__ ((__aligned__(16)));
|
|
dma_descr_context out_context __attribute__ ((__aligned__(32)));
|
|
wait_queue_head_t out_wait_q;
|
|
wait_queue_head_t in_wait_q;
|
|
|
|
spinlock_t lock;
|
|
} sync_port;
|
|
|
|
static int etrax_sync_serial_init(void);
|
|
static void initialize_port(int portnbr);
|
|
static inline int sync_data_avail(struct sync_port *port);
|
|
|
|
static int sync_serial_open(struct inode *, struct file*);
|
|
static int sync_serial_release(struct inode*, struct file*);
|
|
static unsigned int sync_serial_poll(struct file *filp, poll_table *wait);
|
|
|
|
static int sync_serial_ioctl(struct inode*, struct file*,
|
|
unsigned int cmd, unsigned long arg);
|
|
static ssize_t sync_serial_write(struct file * file, const char * buf,
|
|
size_t count, loff_t *ppos);
|
|
static ssize_t sync_serial_read(struct file *file, char *buf,
|
|
size_t count, loff_t *ppos);
|
|
|
|
#if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \
|
|
defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \
|
|
(defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \
|
|
defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA))
|
|
#define SYNC_SER_DMA
|
|
#endif
|
|
|
|
static void send_word(sync_port* port);
|
|
static void start_dma(struct sync_port *port, const char* data, int count);
|
|
static void start_dma_in(sync_port* port);
|
|
#ifdef SYNC_SER_DMA
|
|
static irqreturn_t tr_interrupt(int irq, void *dev_id, struct pt_regs * regs);
|
|
static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs);
|
|
#endif
|
|
|
|
#if (defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0) && \
|
|
!defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)) || \
|
|
(defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1) && \
|
|
!defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA))
|
|
#define SYNC_SER_MANUAL
|
|
#endif
|
|
#ifdef SYNC_SER_MANUAL
|
|
static irqreturn_t manual_interrupt(int irq, void *dev_id, struct pt_regs * regs);
|
|
#endif
|
|
|
|
/* The ports */
|
|
static struct sync_port ports[]=
|
|
{
|
|
{
|
|
.regi_sser = regi_sser0,
|
|
.regi_dmaout = regi_dma4,
|
|
.regi_dmain = regi_dma5,
|
|
#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL0_DMA)
|
|
.use_dma = 1,
|
|
#else
|
|
.use_dma = 0,
|
|
#endif
|
|
},
|
|
{
|
|
.regi_sser = regi_sser1,
|
|
.regi_dmaout = regi_dma6,
|
|
.regi_dmain = regi_dma7,
|
|
#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL1_DMA)
|
|
.use_dma = 1,
|
|
#else
|
|
.use_dma = 0,
|
|
#endif
|
|
}
|
|
};
|
|
|
|
#define NUMBER_OF_PORTS (sizeof(ports)/sizeof(sync_port))
|
|
|
|
static struct file_operations sync_serial_fops = {
|
|
.owner = THIS_MODULE,
|
|
.write = sync_serial_write,
|
|
.read = sync_serial_read,
|
|
.poll = sync_serial_poll,
|
|
.ioctl = sync_serial_ioctl,
|
|
.open = sync_serial_open,
|
|
.release = sync_serial_release
|
|
};
|
|
|
|
static int __init etrax_sync_serial_init(void)
|
|
{
|
|
ports[0].enabled = 0;
|
|
ports[1].enabled = 0;
|
|
|
|
if (register_chrdev(SYNC_SERIAL_MAJOR,"sync serial", &sync_serial_fops) <0 )
|
|
{
|
|
printk("unable to get major for synchronous serial port\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* Initialize Ports */
|
|
#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT0)
|
|
if (crisv32_pinmux_alloc_fixed(pinmux_sser0))
|
|
{
|
|
printk("Unable to allocate pins for syncrhronous serial port 0\n");
|
|
return -EIO;
|
|
}
|
|
ports[0].enabled = 1;
|
|
initialize_port(0);
|
|
#endif
|
|
|
|
#if defined(CONFIG_ETRAX_SYNCHRONOUS_SERIAL_PORT1)
|
|
if (crisv32_pinmux_alloc_fixed(pinmux_sser1))
|
|
{
|
|
printk("Unable to allocate pins for syncrhronous serial port 0\n");
|
|
return -EIO;
|
|
}
|
|
ports[1].enabled = 1;
|
|
initialize_port(1);
|
|
#endif
|
|
|
|
printk("ETRAX FS synchronous serial port driver\n");
|
|
return 0;
|
|
}
|
|
|
|
static void __init initialize_port(int portnbr)
|
|
{
|
|
struct sync_port* port = &ports[portnbr];
|
|
reg_sser_rw_cfg cfg = {0};
|
|
reg_sser_rw_frm_cfg frm_cfg = {0};
|
|
reg_sser_rw_tr_cfg tr_cfg = {0};
|
|
reg_sser_rw_rec_cfg rec_cfg = {0};
|
|
|
|
DEBUG(printk("Init sync serial port %d\n", portnbr));
|
|
|
|
port->port_nbr = portnbr;
|
|
port->init_irqs = 1;
|
|
|
|
port->outp = port->out_buffer;
|
|
port->output = 1;
|
|
port->input = 0;
|
|
|
|
port->readp = port->flip;
|
|
port->writep = port->flip;
|
|
port->in_buffer_size = IN_BUFFER_SIZE;
|
|
port->inbufchunk = IN_DESCR_SIZE;
|
|
port->next_rx_desc = &port->in_descr[0];
|
|
port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR-1];
|
|
port->prev_rx_desc->eol = 1;
|
|
|
|
init_waitqueue_head(&port->out_wait_q);
|
|
init_waitqueue_head(&port->in_wait_q);
|
|
|
|
spin_lock_init(&port->lock);
|
|
|
|
cfg.out_clk_src = regk_sser_intern_clk;
|
|
cfg.out_clk_pol = regk_sser_pos;
|
|
cfg.clk_od_mode = regk_sser_no;
|
|
cfg.clk_dir = regk_sser_out;
|
|
cfg.gate_clk = regk_sser_no;
|
|
cfg.base_freq = regk_sser_f29_493;
|
|
cfg.clk_div = 256;
|
|
REG_WR(sser, port->regi_sser, rw_cfg, cfg);
|
|
|
|
frm_cfg.wordrate = DEFAULT_WORD_RATE;
|
|
frm_cfg.type = regk_sser_edge;
|
|
frm_cfg.frame_pin_dir = regk_sser_out;
|
|
frm_cfg.frame_pin_use = regk_sser_frm;
|
|
frm_cfg.status_pin_dir = regk_sser_in;
|
|
frm_cfg.status_pin_use = regk_sser_hold;
|
|
frm_cfg.out_on = regk_sser_tr;
|
|
frm_cfg.tr_delay = 1;
|
|
REG_WR(sser, port->regi_sser, rw_frm_cfg, frm_cfg);
|
|
|
|
tr_cfg.urun_stop = regk_sser_no;
|
|
tr_cfg.sample_size = 7;
|
|
tr_cfg.sh_dir = regk_sser_msbfirst;
|
|
tr_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no;
|
|
tr_cfg.rate_ctrl = regk_sser_bulk;
|
|
tr_cfg.data_pin_use = regk_sser_dout;
|
|
tr_cfg.bulk_wspace = 1;
|
|
REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg);
|
|
|
|
rec_cfg.sample_size = 7;
|
|
rec_cfg.sh_dir = regk_sser_msbfirst;
|
|
rec_cfg.use_dma = port->use_dma ? regk_sser_yes : regk_sser_no;
|
|
rec_cfg.fifo_thr = regk_sser_inf;
|
|
REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg);
|
|
}
|
|
|
|
static inline int sync_data_avail(struct sync_port *port)
|
|
{
|
|
int avail;
|
|
unsigned char *start;
|
|
unsigned char *end;
|
|
|
|
start = (unsigned char*)port->readp; /* cast away volatile */
|
|
end = (unsigned char*)port->writep; /* cast away volatile */
|
|
/* 0123456789 0123456789
|
|
* ----- - -----
|
|
* ^rp ^wp ^wp ^rp
|
|
*/
|
|
|
|
if (end >= start)
|
|
avail = end - start;
|
|
else
|
|
avail = port->in_buffer_size - (start - end);
|
|
return avail;
|
|
}
|
|
|
|
static inline int sync_data_avail_to_end(struct sync_port *port)
|
|
{
|
|
int avail;
|
|
unsigned char *start;
|
|
unsigned char *end;
|
|
|
|
start = (unsigned char*)port->readp; /* cast away volatile */
|
|
end = (unsigned char*)port->writep; /* cast away volatile */
|
|
/* 0123456789 0123456789
|
|
* ----- -----
|
|
* ^rp ^wp ^wp ^rp
|
|
*/
|
|
|
|
if (end >= start)
|
|
avail = end - start;
|
|
else
|
|
avail = port->flip + port->in_buffer_size - start;
|
|
return avail;
|
|
}
|
|
|
|
static int sync_serial_open(struct inode *inode, struct file *file)
|
|
{
|
|
int dev = MINOR(inode->i_rdev);
|
|
sync_port* port;
|
|
reg_dma_rw_cfg cfg = {.en = regk_dma_yes};
|
|
reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes};
|
|
|
|
DEBUG(printk("Open sync serial port %d\n", dev));
|
|
|
|
if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
|
|
{
|
|
DEBUG(printk("Invalid minor %d\n", dev));
|
|
return -ENODEV;
|
|
}
|
|
port = &ports[dev];
|
|
/* Allow open this device twice (assuming one reader and one writer) */
|
|
if (port->busy == 2)
|
|
{
|
|
DEBUG(printk("Device is busy.. \n"));
|
|
return -EBUSY;
|
|
}
|
|
if (port->init_irqs) {
|
|
if (port->use_dma) {
|
|
if (port == &ports[0]){
|
|
#ifdef SYNC_SER_DMA
|
|
if(request_irq(DMA4_INTR_VECT,
|
|
tr_interrupt,
|
|
0,
|
|
"synchronous serial 0 dma tr",
|
|
&ports[0])) {
|
|
printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ");
|
|
return -EBUSY;
|
|
} else if(request_irq(DMA5_INTR_VECT,
|
|
rx_interrupt,
|
|
0,
|
|
"synchronous serial 1 dma rx",
|
|
&ports[0])) {
|
|
free_irq(DMA4_INTR_VECT, &port[0]);
|
|
printk(KERN_CRIT "Can't allocate sync serial port 0 IRQ");
|
|
return -EBUSY;
|
|
} else if (crisv32_request_dma(SYNC_SER0_TX_DMA_NBR,
|
|
"synchronous serial 0 dma tr",
|
|
DMA_VERBOSE_ON_ERROR,
|
|
0,
|
|
dma_sser0)) {
|
|
free_irq(DMA4_INTR_VECT, &port[0]);
|
|
free_irq(DMA5_INTR_VECT, &port[0]);
|
|
printk(KERN_CRIT "Can't allocate sync serial port 0 TX DMA channel");
|
|
return -EBUSY;
|
|
} else if (crisv32_request_dma(SYNC_SER0_RX_DMA_NBR,
|
|
"synchronous serial 0 dma rec",
|
|
DMA_VERBOSE_ON_ERROR,
|
|
0,
|
|
dma_sser0)) {
|
|
crisv32_free_dma(SYNC_SER0_TX_DMA_NBR);
|
|
free_irq(DMA4_INTR_VECT, &port[0]);
|
|
free_irq(DMA5_INTR_VECT, &port[0]);
|
|
printk(KERN_CRIT "Can't allocate sync serial port 1 RX DMA channel");
|
|
return -EBUSY;
|
|
}
|
|
#endif
|
|
}
|
|
else if (port == &ports[1]){
|
|
#ifdef SYNC_SER_DMA
|
|
if (request_irq(DMA6_INTR_VECT,
|
|
tr_interrupt,
|
|
0,
|
|
"synchronous serial 1 dma tr",
|
|
&ports[1])) {
|
|
printk(KERN_CRIT "Can't allocate sync serial port 1 IRQ");
|
|
return -EBUSY;
|
|
} else if (request_irq(DMA7_INTR_VECT,
|
|
rx_interrupt,
|
|
0,
|
|
"synchronous serial 1 dma rx",
|
|
&ports[1])) {
|
|
free_irq(DMA6_INTR_VECT, &ports[1]);
|
|
printk(KERN_CRIT "Can't allocate sync serial port 3 IRQ");
|
|
return -EBUSY;
|
|
} else if (crisv32_request_dma(SYNC_SER1_TX_DMA_NBR,
|
|
"synchronous serial 1 dma tr",
|
|
DMA_VERBOSE_ON_ERROR,
|
|
0,
|
|
dma_sser1)) {
|
|
free_irq(21, &ports[1]);
|
|
free_irq(20, &ports[1]);
|
|
printk(KERN_CRIT "Can't allocate sync serial port 3 TX DMA channel");
|
|
return -EBUSY;
|
|
} else if (crisv32_request_dma(SYNC_SER1_RX_DMA_NBR,
|
|
"synchronous serial 3 dma rec",
|
|
DMA_VERBOSE_ON_ERROR,
|
|
0,
|
|
dma_sser1)) {
|
|
crisv32_free_dma(SYNC_SER1_TX_DMA_NBR);
|
|
free_irq(DMA6_INTR_VECT, &ports[1]);
|
|
free_irq(DMA7_INTR_VECT, &ports[1]);
|
|
printk(KERN_CRIT "Can't allocate sync serial port 3 RX DMA channel");
|
|
return -EBUSY;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* Enable DMAs */
|
|
REG_WR(dma, port->regi_dmain, rw_cfg, cfg);
|
|
REG_WR(dma, port->regi_dmaout, rw_cfg, cfg);
|
|
/* Enable DMA IRQs */
|
|
REG_WR(dma, port->regi_dmain, rw_intr_mask, intr_mask);
|
|
REG_WR(dma, port->regi_dmaout, rw_intr_mask, intr_mask);
|
|
/* Set up wordsize = 2 for DMAs. */
|
|
DMA_WR_CMD (port->regi_dmain, regk_dma_set_w_size1);
|
|
DMA_WR_CMD (port->regi_dmaout, regk_dma_set_w_size1);
|
|
|
|
start_dma_in(port);
|
|
port->init_irqs = 0;
|
|
} else { /* !port->use_dma */
|
|
#ifdef SYNC_SER_MANUAL
|
|
if (port == &ports[0]) {
|
|
if (request_irq(SSER0_INTR_VECT,
|
|
manual_interrupt,
|
|
0,
|
|
"synchronous serial manual irq",
|
|
&ports[0])) {
|
|
printk("Can't allocate sync serial manual irq");
|
|
return -EBUSY;
|
|
}
|
|
} else if (port == &ports[1]) {
|
|
if (request_irq(SSER1_INTR_VECT,
|
|
manual_interrupt,
|
|
0,
|
|
"synchronous serial manual irq",
|
|
&ports[1])) {
|
|
printk(KERN_CRIT "Can't allocate sync serial manual irq");
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
port->init_irqs = 0;
|
|
#else
|
|
panic("sync_serial: Manual mode not supported.\n");
|
|
#endif /* SYNC_SER_MANUAL */
|
|
}
|
|
} /* port->init_irqs */
|
|
|
|
port->busy++;
|
|
return 0;
|
|
}
|
|
|
|
static int sync_serial_release(struct inode *inode, struct file *file)
|
|
{
|
|
int dev = MINOR(inode->i_rdev);
|
|
sync_port* port;
|
|
|
|
if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
|
|
{
|
|
DEBUG(printk("Invalid minor %d\n", dev));
|
|
return -ENODEV;
|
|
}
|
|
port = &ports[dev];
|
|
if (port->busy)
|
|
port->busy--;
|
|
if (!port->busy)
|
|
/* XXX */ ;
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
|
|
{
|
|
int dev = MINOR(file->f_dentry->d_inode->i_rdev);
|
|
unsigned int mask = 0;
|
|
sync_port* port;
|
|
DEBUGPOLL( static unsigned int prev_mask = 0; );
|
|
|
|
port = &ports[dev];
|
|
poll_wait(file, &port->out_wait_q, wait);
|
|
poll_wait(file, &port->in_wait_q, wait);
|
|
/* Some room to write */
|
|
if (port->out_count < OUT_BUFFER_SIZE)
|
|
mask |= POLLOUT | POLLWRNORM;
|
|
/* At least an inbufchunk of data */
|
|
if (sync_data_avail(port) >= port->inbufchunk)
|
|
mask |= POLLIN | POLLRDNORM;
|
|
|
|
DEBUGPOLL(if (mask != prev_mask)
|
|
printk("sync_serial_poll: mask 0x%08X %s %s\n", mask,
|
|
mask&POLLOUT?"POLLOUT":"", mask&POLLIN?"POLLIN":"");
|
|
prev_mask = mask;
|
|
);
|
|
return mask;
|
|
}
|
|
|
|
static int sync_serial_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
int return_val = 0;
|
|
int dev = MINOR(file->f_dentry->d_inode->i_rdev);
|
|
sync_port* port;
|
|
reg_sser_rw_tr_cfg tr_cfg;
|
|
reg_sser_rw_rec_cfg rec_cfg;
|
|
reg_sser_rw_frm_cfg frm_cfg;
|
|
reg_sser_rw_cfg gen_cfg;
|
|
reg_sser_rw_intr_mask intr_mask;
|
|
|
|
if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
|
|
{
|
|
DEBUG(printk("Invalid minor %d\n", dev));
|
|
return -1;
|
|
}
|
|
port = &ports[dev];
|
|
spin_lock_irq(&port->lock);
|
|
|
|
tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg);
|
|
rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg);
|
|
frm_cfg = REG_RD(sser, port->regi_sser, rw_frm_cfg);
|
|
gen_cfg = REG_RD(sser, port->regi_sser, rw_cfg);
|
|
intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask);
|
|
|
|
switch(cmd)
|
|
{
|
|
case SSP_SPEED:
|
|
if (GET_SPEED(arg) == CODEC)
|
|
{
|
|
gen_cfg.base_freq = regk_sser_f32;
|
|
/* FREQ = 0 => 4 MHz => clk_div = 7*/
|
|
gen_cfg.clk_div = 6 + (1 << GET_FREQ(arg));
|
|
}
|
|
else
|
|
{
|
|
gen_cfg.base_freq = regk_sser_f29_493;
|
|
switch (GET_SPEED(arg))
|
|
{
|
|
case SSP150:
|
|
gen_cfg.clk_div = 29493000 / (150 * 8) - 1;
|
|
break;
|
|
case SSP300:
|
|
gen_cfg.clk_div = 29493000 / (300 * 8) - 1;
|
|
break;
|
|
case SSP600:
|
|
gen_cfg.clk_div = 29493000 / (600 * 8) - 1;
|
|
break;
|
|
case SSP1200:
|
|
gen_cfg.clk_div = 29493000 / (1200 * 8) - 1;
|
|
break;
|
|
case SSP2400:
|
|
gen_cfg.clk_div = 29493000 / (2400 * 8) - 1;
|
|
break;
|
|
case SSP4800:
|
|
gen_cfg.clk_div = 29493000 / (4800 * 8) - 1;
|
|
break;
|
|
case SSP9600:
|
|
gen_cfg.clk_div = 29493000 / (9600 * 8) - 1;
|
|
break;
|
|
case SSP19200:
|
|
gen_cfg.clk_div = 29493000 / (19200 * 8) - 1;
|
|
break;
|
|
case SSP28800:
|
|
gen_cfg.clk_div = 29493000 / (28800 * 8) - 1;
|
|
break;
|
|
case SSP57600:
|
|
gen_cfg.clk_div = 29493000 / (57600 * 8) - 1;
|
|
break;
|
|
case SSP115200:
|
|
gen_cfg.clk_div = 29493000 / (115200 * 8) - 1;
|
|
break;
|
|
case SSP230400:
|
|
gen_cfg.clk_div = 29493000 / (230400 * 8) - 1;
|
|
break;
|
|
case SSP460800:
|
|
gen_cfg.clk_div = 29493000 / (460800 * 8) - 1;
|
|
break;
|
|
case SSP921600:
|
|
gen_cfg.clk_div = 29493000 / (921600 * 8) - 1;
|
|
break;
|
|
case SSP3125000:
|
|
gen_cfg.base_freq = regk_sser_f100;
|
|
gen_cfg.clk_div = 100000000 / (3125000 * 8) - 1;
|
|
break;
|
|
|
|
}
|
|
}
|
|
frm_cfg.wordrate = GET_WORD_RATE(arg);
|
|
|
|
break;
|
|
case SSP_MODE:
|
|
switch(arg)
|
|
{
|
|
case MASTER_OUTPUT:
|
|
port->output = 1;
|
|
port->input = 0;
|
|
gen_cfg.clk_dir = regk_sser_out;
|
|
break;
|
|
case SLAVE_OUTPUT:
|
|
port->output = 1;
|
|
port->input = 0;
|
|
gen_cfg.clk_dir = regk_sser_in;
|
|
break;
|
|
case MASTER_INPUT:
|
|
port->output = 0;
|
|
port->input = 1;
|
|
gen_cfg.clk_dir = regk_sser_out;
|
|
break;
|
|
case SLAVE_INPUT:
|
|
port->output = 0;
|
|
port->input = 1;
|
|
gen_cfg.clk_dir = regk_sser_in;
|
|
break;
|
|
case MASTER_BIDIR:
|
|
port->output = 1;
|
|
port->input = 1;
|
|
gen_cfg.clk_dir = regk_sser_out;
|
|
break;
|
|
case SLAVE_BIDIR:
|
|
port->output = 1;
|
|
port->input = 1;
|
|
gen_cfg.clk_dir = regk_sser_in;
|
|
break;
|
|
default:
|
|
spin_unlock_irq(&port->lock);
|
|
return -EINVAL;
|
|
|
|
}
|
|
if (!port->use_dma || (arg == MASTER_OUTPUT || arg == SLAVE_OUTPUT))
|
|
intr_mask.rdav = regk_sser_yes;
|
|
break;
|
|
case SSP_FRAME_SYNC:
|
|
if (arg & NORMAL_SYNC)
|
|
frm_cfg.tr_delay = 1;
|
|
else if (arg & EARLY_SYNC)
|
|
frm_cfg.tr_delay = 0;
|
|
|
|
tr_cfg.bulk_wspace = frm_cfg.tr_delay;
|
|
frm_cfg.early_wend = regk_sser_yes;
|
|
if (arg & BIT_SYNC)
|
|
frm_cfg.type = regk_sser_edge;
|
|
else if (arg & WORD_SYNC)
|
|
frm_cfg.type = regk_sser_level;
|
|
else if (arg & EXTENDED_SYNC)
|
|
frm_cfg.early_wend = regk_sser_no;
|
|
|
|
if (arg & SYNC_ON)
|
|
frm_cfg.frame_pin_use = regk_sser_frm;
|
|
else if (arg & SYNC_OFF)
|
|
frm_cfg.frame_pin_use = regk_sser_gio0;
|
|
|
|
if (arg & WORD_SIZE_8)
|
|
rec_cfg.sample_size = tr_cfg.sample_size = 7;
|
|
else if (arg & WORD_SIZE_12)
|
|
rec_cfg.sample_size = tr_cfg.sample_size = 11;
|
|
else if (arg & WORD_SIZE_16)
|
|
rec_cfg.sample_size = tr_cfg.sample_size = 15;
|
|
else if (arg & WORD_SIZE_24)
|
|
rec_cfg.sample_size = tr_cfg.sample_size = 23;
|
|
else if (arg & WORD_SIZE_32)
|
|
rec_cfg.sample_size = tr_cfg.sample_size = 31;
|
|
|
|
if (arg & BIT_ORDER_MSB)
|
|
rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_msbfirst;
|
|
else if (arg & BIT_ORDER_LSB)
|
|
rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_lsbfirst;
|
|
|
|
if (arg & FLOW_CONTROL_ENABLE)
|
|
rec_cfg.fifo_thr = regk_sser_thr16;
|
|
else if (arg & FLOW_CONTROL_DISABLE)
|
|
rec_cfg.fifo_thr = regk_sser_inf;
|
|
|
|
if (arg & CLOCK_NOT_GATED)
|
|
gen_cfg.gate_clk = regk_sser_no;
|
|
else if (arg & CLOCK_GATED)
|
|
gen_cfg.gate_clk = regk_sser_yes;
|
|
|
|
break;
|
|
case SSP_IPOLARITY:
|
|
/* NOTE!! negedge is considered NORMAL */
|
|
if (arg & CLOCK_NORMAL)
|
|
rec_cfg.clk_pol = regk_sser_neg;
|
|
else if (arg & CLOCK_INVERT)
|
|
rec_cfg.clk_pol = regk_sser_pos;
|
|
|
|
if (arg & FRAME_NORMAL)
|
|
frm_cfg.level = regk_sser_pos_hi;
|
|
else if (arg & FRAME_INVERT)
|
|
frm_cfg.level = regk_sser_neg_lo;
|
|
|
|
if (arg & STATUS_NORMAL)
|
|
gen_cfg.hold_pol = regk_sser_pos;
|
|
else if (arg & STATUS_INVERT)
|
|
gen_cfg.hold_pol = regk_sser_neg;
|
|
break;
|
|
case SSP_OPOLARITY:
|
|
if (arg & CLOCK_NORMAL)
|
|
gen_cfg.out_clk_pol = regk_sser_neg;
|
|
else if (arg & CLOCK_INVERT)
|
|
gen_cfg.out_clk_pol = regk_sser_pos;
|
|
|
|
if (arg & FRAME_NORMAL)
|
|
frm_cfg.level = regk_sser_pos_hi;
|
|
else if (arg & FRAME_INVERT)
|
|
frm_cfg.level = regk_sser_neg_lo;
|
|
|
|
if (arg & STATUS_NORMAL)
|
|
gen_cfg.hold_pol = regk_sser_pos;
|
|
else if (arg & STATUS_INVERT)
|
|
gen_cfg.hold_pol = regk_sser_neg;
|
|
break;
|
|
case SSP_SPI:
|
|
rec_cfg.fifo_thr = regk_sser_inf;
|
|
rec_cfg.sh_dir = tr_cfg.sh_dir = regk_sser_msbfirst;
|
|
rec_cfg.sample_size = tr_cfg.sample_size = 7;
|
|
frm_cfg.frame_pin_use = regk_sser_frm;
|
|
frm_cfg.type = regk_sser_level;
|
|
frm_cfg.tr_delay = 1;
|
|
frm_cfg.level = regk_sser_neg_lo;
|
|
if (arg & SPI_SLAVE)
|
|
{
|
|
rec_cfg.clk_pol = regk_sser_neg;
|
|
gen_cfg.clk_dir = regk_sser_in;
|
|
port->input = 1;
|
|
port->output = 0;
|
|
}
|
|
else
|
|
{
|
|
gen_cfg.out_clk_pol = regk_sser_pos;
|
|
port->input = 0;
|
|
port->output = 1;
|
|
gen_cfg.clk_dir = regk_sser_out;
|
|
}
|
|
break;
|
|
case SSP_INBUFCHUNK:
|
|
break;
|
|
default:
|
|
return_val = -1;
|
|
}
|
|
|
|
|
|
if (port->started)
|
|
{
|
|
tr_cfg.tr_en = port->output;
|
|
rec_cfg.rec_en = port->input;
|
|
}
|
|
|
|
REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg);
|
|
REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg);
|
|
REG_WR(sser, port->regi_sser, rw_frm_cfg, frm_cfg);
|
|
REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask);
|
|
REG_WR(sser, port->regi_sser, rw_cfg, gen_cfg);
|
|
|
|
spin_unlock_irq(&port->lock);
|
|
return return_val;
|
|
}
|
|
|
|
static ssize_t sync_serial_write(struct file * file, const char * buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
int dev = MINOR(file->f_dentry->d_inode->i_rdev);
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
sync_port *port;
|
|
unsigned long c, c1;
|
|
unsigned long free_outp;
|
|
unsigned long outp;
|
|
unsigned long out_buffer;
|
|
unsigned long flags;
|
|
|
|
if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
|
|
{
|
|
DEBUG(printk("Invalid minor %d\n", dev));
|
|
return -ENODEV;
|
|
}
|
|
port = &ports[dev];
|
|
|
|
DEBUGWRITE(printk("W d%d c %lu (%d/%d)\n", port->port_nbr, count, port->out_count, OUT_BUFFER_SIZE));
|
|
/* Space to end of buffer */
|
|
/*
|
|
* out_buffer <c1>012345<- c ->OUT_BUFFER_SIZE
|
|
* outp^ +out_count
|
|
^free_outp
|
|
* out_buffer 45<- c ->0123OUT_BUFFER_SIZE
|
|
* +out_count outp^
|
|
* free_outp
|
|
*
|
|
*/
|
|
|
|
/* Read variables that may be updated by interrupts */
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
count = count > OUT_BUFFER_SIZE - port->out_count ? OUT_BUFFER_SIZE - port->out_count : count;
|
|
outp = (unsigned long)port->outp;
|
|
free_outp = outp + port->out_count;
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
out_buffer = (unsigned long)port->out_buffer;
|
|
|
|
/* Find out where and how much to write */
|
|
if (free_outp >= out_buffer + OUT_BUFFER_SIZE)
|
|
free_outp -= OUT_BUFFER_SIZE;
|
|
if (free_outp >= outp)
|
|
c = out_buffer + OUT_BUFFER_SIZE - free_outp;
|
|
else
|
|
c = outp - free_outp;
|
|
if (c > count)
|
|
c = count;
|
|
|
|
// DEBUGWRITE(printk("w op %08lX fop %08lX c %lu\n", outp, free_outp, c));
|
|
if (copy_from_user((void*)free_outp, buf, c))
|
|
return -EFAULT;
|
|
|
|
if (c != count) {
|
|
buf += c;
|
|
c1 = count - c;
|
|
DEBUGWRITE(printk("w2 fi %lu c %lu c1 %lu\n", free_outp-out_buffer, c, c1));
|
|
if (copy_from_user((void*)out_buffer, buf, c1))
|
|
return -EFAULT;
|
|
}
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
port->out_count += count;
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
|
|
/* Make sure transmitter/receiver is running */
|
|
if (!port->started)
|
|
{
|
|
reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg);
|
|
reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg);
|
|
reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg);
|
|
cfg.en = regk_sser_yes;
|
|
tr_cfg.tr_en = port->output;
|
|
rec_cfg.rec_en = port->input;
|
|
REG_WR(sser, port->regi_sser, rw_cfg, cfg);
|
|
REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg);
|
|
REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg);
|
|
port->started = 1;
|
|
}
|
|
|
|
if (file->f_flags & O_NONBLOCK) {
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
if (!port->tr_running) {
|
|
if (!port->use_dma) {
|
|
reg_sser_rw_intr_mask intr_mask;
|
|
intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask);
|
|
/* Start sender by writing data */
|
|
send_word(port);
|
|
/* and enable transmitter ready IRQ */
|
|
intr_mask.trdy = 1;
|
|
REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask);
|
|
} else {
|
|
start_dma(port, (unsigned char* volatile )port->outp, c);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
DEBUGWRITE(printk("w d%d c %lu NB\n",
|
|
port->port_nbr, count));
|
|
return count;
|
|
}
|
|
|
|
/* Sleep until all sent */
|
|
|
|
add_wait_queue(&port->out_wait_q, &wait);
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
if (!port->tr_running) {
|
|
if (!port->use_dma) {
|
|
reg_sser_rw_intr_mask intr_mask;
|
|
intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask);
|
|
/* Start sender by writing data */
|
|
send_word(port);
|
|
/* and enable transmitter ready IRQ */
|
|
intr_mask.trdy = 1;
|
|
REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask);
|
|
} else {
|
|
start_dma(port, port->outp, c);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
schedule();
|
|
set_current_state(TASK_RUNNING);
|
|
remove_wait_queue(&port->out_wait_q, &wait);
|
|
if (signal_pending(current))
|
|
{
|
|
return -EINTR;
|
|
}
|
|
DEBUGWRITE(printk("w d%d c %lu\n", port->port_nbr, count));
|
|
return count;
|
|
}
|
|
|
|
static ssize_t sync_serial_read(struct file * file, char * buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
int dev = MINOR(file->f_dentry->d_inode->i_rdev);
|
|
int avail;
|
|
sync_port *port;
|
|
unsigned char* start;
|
|
unsigned char* end;
|
|
unsigned long flags;
|
|
|
|
if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
|
|
{
|
|
DEBUG(printk("Invalid minor %d\n", dev));
|
|
return -ENODEV;
|
|
}
|
|
port = &ports[dev];
|
|
|
|
DEBUGREAD(printk("R%d c %d ri %lu wi %lu /%lu\n", dev, count, port->readp - port->flip, port->writep - port->flip, port->in_buffer_size));
|
|
|
|
if (!port->started)
|
|
{
|
|
reg_sser_rw_cfg cfg = REG_RD(sser, port->regi_sser, rw_cfg);
|
|
reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg);
|
|
reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg);
|
|
cfg.en = regk_sser_yes;
|
|
tr_cfg.tr_en = regk_sser_yes;
|
|
rec_cfg.rec_en = regk_sser_yes;
|
|
REG_WR(sser, port->regi_sser, rw_cfg, cfg);
|
|
REG_WR(sser, port->regi_sser, rw_tr_cfg, tr_cfg);
|
|
REG_WR(sser, port->regi_sser, rw_rec_cfg, rec_cfg);
|
|
port->started = 1;
|
|
}
|
|
|
|
|
|
/* Calculate number of available bytes */
|
|
/* Save pointers to avoid that they are modified by interrupt */
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
start = (unsigned char*)port->readp; /* cast away volatile */
|
|
end = (unsigned char*)port->writep; /* cast away volatile */
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
while ((start == end) && !port->full) /* No data */
|
|
{
|
|
if (file->f_flags & O_NONBLOCK)
|
|
{
|
|
return -EAGAIN;
|
|
}
|
|
|
|
interruptible_sleep_on(&port->in_wait_q);
|
|
if (signal_pending(current))
|
|
{
|
|
return -EINTR;
|
|
}
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
start = (unsigned char*)port->readp; /* cast away volatile */
|
|
end = (unsigned char*)port->writep; /* cast away volatile */
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
/* Lazy read, never return wrapped data. */
|
|
if (port->full)
|
|
avail = port->in_buffer_size;
|
|
else if (end > start)
|
|
avail = end - start;
|
|
else
|
|
avail = port->flip + port->in_buffer_size - start;
|
|
|
|
count = count > avail ? avail : count;
|
|
if (copy_to_user(buf, start, count))
|
|
return -EFAULT;
|
|
/* Disable interrupts while updating readp */
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
port->readp += count;
|
|
if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */
|
|
port->readp = port->flip;
|
|
port->full = 0;
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
DEBUGREAD(printk("r %d\n", count));
|
|
return count;
|
|
}
|
|
|
|
static void send_word(sync_port* port)
|
|
{
|
|
reg_sser_rw_tr_cfg tr_cfg = REG_RD(sser, port->regi_sser, rw_tr_cfg);
|
|
reg_sser_rw_tr_data tr_data = {0};
|
|
|
|
switch(tr_cfg.sample_size)
|
|
{
|
|
case 8:
|
|
port->out_count--;
|
|
tr_data.data = *port->outp++;
|
|
REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
|
|
if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
|
|
port->outp = port->out_buffer;
|
|
break;
|
|
case 12:
|
|
{
|
|
int data = (*port->outp++) << 8;
|
|
data |= *port->outp++;
|
|
port->out_count-=2;
|
|
tr_data.data = data;
|
|
REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
|
|
if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
|
|
port->outp = port->out_buffer;
|
|
}
|
|
break;
|
|
case 16:
|
|
port->out_count-=2;
|
|
tr_data.data = *(unsigned short *)port->outp;
|
|
REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
|
|
port->outp+=2;
|
|
if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
|
|
port->outp = port->out_buffer;
|
|
break;
|
|
case 24:
|
|
port->out_count-=3;
|
|
tr_data.data = *(unsigned short *)port->outp;
|
|
REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
|
|
port->outp+=2;
|
|
tr_data.data = *port->outp++;
|
|
REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
|
|
if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
|
|
port->outp = port->out_buffer;
|
|
break;
|
|
case 32:
|
|
port->out_count-=4;
|
|
tr_data.data = *(unsigned short *)port->outp;
|
|
REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
|
|
port->outp+=2;
|
|
tr_data.data = *(unsigned short *)port->outp;
|
|
REG_WR(sser, port->regi_sser, rw_tr_data, tr_data);
|
|
port->outp+=2;
|
|
if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
|
|
port->outp = port->out_buffer;
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
static void start_dma(struct sync_port* port, const char* data, int count)
|
|
{
|
|
port->tr_running = 1;
|
|
port->out_descr.buf = (char*)virt_to_phys((char*)data);
|
|
port->out_descr.after = port->out_descr.buf + count;
|
|
port->out_descr.eol = port->out_descr.intr = 1;
|
|
|
|
port->out_context.saved_data = (dma_descr_data*)virt_to_phys(&port->out_descr);
|
|
port->out_context.saved_data_buf = port->out_descr.buf;
|
|
|
|
DMA_START_CONTEXT(port->regi_dmaout, virt_to_phys((char*)&port->out_context));
|
|
DEBUGTXINT(printk("dma %08lX c %d\n", (unsigned long)data, count));
|
|
}
|
|
|
|
static void start_dma_in(sync_port* port)
|
|
{
|
|
int i;
|
|
char* buf;
|
|
port->writep = port->flip;
|
|
|
|
if (port->writep > port->flip + port->in_buffer_size)
|
|
{
|
|
panic("Offset too large in sync serial driver\n");
|
|
return;
|
|
}
|
|
buf = (char*)virt_to_phys(port->in_buffer);
|
|
for (i = 0; i < NUM_IN_DESCR; i++) {
|
|
port->in_descr[i].buf = buf;
|
|
port->in_descr[i].after = buf + port->inbufchunk;
|
|
port->in_descr[i].intr = 1;
|
|
port->in_descr[i].next = (dma_descr_data*)virt_to_phys(&port->in_descr[i+1]);
|
|
port->in_descr[i].buf = buf;
|
|
buf += port->inbufchunk;
|
|
}
|
|
/* Link the last descriptor to the first */
|
|
port->in_descr[i-1].next = (dma_descr_data*)virt_to_phys(&port->in_descr[0]);
|
|
port->in_descr[i-1].eol = regk_sser_yes;
|
|
port->next_rx_desc = &port->in_descr[0];
|
|
port->prev_rx_desc = &port->in_descr[NUM_IN_DESCR - 1];
|
|
port->in_context.saved_data = (dma_descr_data*)virt_to_phys(&port->in_descr[0]);
|
|
port->in_context.saved_data_buf = port->in_descr[0].buf;
|
|
DMA_START_CONTEXT(port->regi_dmain, virt_to_phys(&port->in_context));
|
|
}
|
|
|
|
#ifdef SYNC_SER_DMA
|
|
static irqreturn_t tr_interrupt(int irq, void *dev_id, struct pt_regs * regs)
|
|
{
|
|
reg_dma_r_masked_intr masked;
|
|
reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes};
|
|
int i;
|
|
struct dma_descr_data *descr;
|
|
unsigned int sentl;
|
|
int found = 0;
|
|
|
|
for (i = 0; i < NUMBER_OF_PORTS; i++)
|
|
{
|
|
sync_port *port = &ports[i];
|
|
if (!port->enabled || !port->use_dma )
|
|
continue;
|
|
|
|
masked = REG_RD(dma, port->regi_dmaout, r_masked_intr);
|
|
|
|
if (masked.data) /* IRQ active for the port? */
|
|
{
|
|
found = 1;
|
|
/* Clear IRQ */
|
|
REG_WR(dma, port->regi_dmaout, rw_ack_intr, ack_intr);
|
|
descr = &port->out_descr;
|
|
sentl = descr->after - descr->buf;
|
|
port->out_count -= sentl;
|
|
port->outp += sentl;
|
|
if (port->outp >= port->out_buffer + OUT_BUFFER_SIZE)
|
|
port->outp = port->out_buffer;
|
|
if (port->out_count) {
|
|
int c;
|
|
c = port->out_buffer + OUT_BUFFER_SIZE - port->outp;
|
|
if (c > port->out_count)
|
|
c = port->out_count;
|
|
DEBUGTXINT(printk("tx_int DMAWRITE %i %i\n", sentl, c));
|
|
start_dma(port, port->outp, c);
|
|
} else {
|
|
DEBUGTXINT(printk("tx_int DMA stop %i\n", sentl));
|
|
port->tr_running = 0;
|
|
}
|
|
wake_up_interruptible(&port->out_wait_q); /* wake up the waiting process */
|
|
}
|
|
}
|
|
return IRQ_RETVAL(found);
|
|
} /* tr_interrupt */
|
|
|
|
static irqreturn_t rx_interrupt(int irq, void *dev_id, struct pt_regs * regs)
|
|
{
|
|
reg_dma_r_masked_intr masked;
|
|
reg_dma_rw_ack_intr ack_intr = {.data = regk_dma_yes};
|
|
|
|
int i;
|
|
int found = 0;
|
|
|
|
for (i = 0; i < NUMBER_OF_PORTS; i++)
|
|
{
|
|
sync_port *port = &ports[i];
|
|
|
|
if (!port->enabled || !port->use_dma )
|
|
continue;
|
|
|
|
masked = REG_RD(dma, port->regi_dmain, r_masked_intr);
|
|
|
|
if (masked.data) /* Descriptor interrupt */
|
|
{
|
|
found = 1;
|
|
while (REG_RD(dma, port->regi_dmain, rw_data) !=
|
|
virt_to_phys(port->next_rx_desc)) {
|
|
|
|
if (port->writep + port->inbufchunk > port->flip + port->in_buffer_size) {
|
|
int first_size = port->flip + port->in_buffer_size - port->writep;
|
|
memcpy((char*)port->writep, phys_to_virt((unsigned)port->next_rx_desc->buf), first_size);
|
|
memcpy(port->flip, phys_to_virt((unsigned)port->next_rx_desc->buf+first_size), port->inbufchunk - first_size);
|
|
port->writep = port->flip + port->inbufchunk - first_size;
|
|
} else {
|
|
memcpy((char*)port->writep,
|
|
phys_to_virt((unsigned)port->next_rx_desc->buf),
|
|
port->inbufchunk);
|
|
port->writep += port->inbufchunk;
|
|
if (port->writep >= port->flip + port->in_buffer_size)
|
|
port->writep = port->flip;
|
|
}
|
|
if (port->writep == port->readp)
|
|
{
|
|
port->full = 1;
|
|
}
|
|
|
|
port->next_rx_desc->eol = 0;
|
|
port->prev_rx_desc->eol = 1;
|
|
port->prev_rx_desc = phys_to_virt((unsigned)port->next_rx_desc);
|
|
port->next_rx_desc = phys_to_virt((unsigned)port->next_rx_desc->next);
|
|
wake_up_interruptible(&port->in_wait_q); /* wake up the waiting process */
|
|
DMA_CONTINUE(port->regi_dmain);
|
|
REG_WR(dma, port->regi_dmain, rw_ack_intr, ack_intr);
|
|
|
|
}
|
|
}
|
|
}
|
|
return IRQ_RETVAL(found);
|
|
} /* rx_interrupt */
|
|
#endif /* SYNC_SER_DMA */
|
|
|
|
#ifdef SYNC_SER_MANUAL
|
|
static irqreturn_t manual_interrupt(int irq, void *dev_id, struct pt_regs * regs)
|
|
{
|
|
int i;
|
|
int found = 0;
|
|
reg_sser_r_masked_intr masked;
|
|
|
|
for (i = 0; i < NUMBER_OF_PORTS; i++)
|
|
{
|
|
sync_port* port = &ports[i];
|
|
|
|
if (!port->enabled || port->use_dma)
|
|
{
|
|
continue;
|
|
}
|
|
|
|
masked = REG_RD(sser, port->regi_sser, r_masked_intr);
|
|
if (masked.rdav) /* Data received? */
|
|
{
|
|
reg_sser_rw_rec_cfg rec_cfg = REG_RD(sser, port->regi_sser, rw_rec_cfg);
|
|
reg_sser_r_rec_data data = REG_RD(sser, port->regi_sser, r_rec_data);
|
|
found = 1;
|
|
/* Read data */
|
|
switch(rec_cfg.sample_size)
|
|
{
|
|
case 8:
|
|
*port->writep++ = data.data & 0xff;
|
|
break;
|
|
case 12:
|
|
*port->writep = (data.data & 0x0ff0) >> 4;
|
|
*(port->writep + 1) = data.data & 0x0f;
|
|
port->writep+=2;
|
|
break;
|
|
case 16:
|
|
*(unsigned short*)port->writep = data.data;
|
|
port->writep+=2;
|
|
break;
|
|
case 24:
|
|
*(unsigned int*)port->writep = data.data;
|
|
port->writep+=3;
|
|
break;
|
|
case 32:
|
|
*(unsigned int*)port->writep = data.data;
|
|
port->writep+=4;
|
|
break;
|
|
}
|
|
|
|
if (port->writep >= port->flip + port->in_buffer_size) /* Wrap? */
|
|
port->writep = port->flip;
|
|
if (port->writep == port->readp) {
|
|
/* receive buffer overrun, discard oldest data
|
|
*/
|
|
port->readp++;
|
|
if (port->readp >= port->flip + port->in_buffer_size) /* Wrap? */
|
|
port->readp = port->flip;
|
|
}
|
|
if (sync_data_avail(port) >= port->inbufchunk)
|
|
wake_up_interruptible(&port->in_wait_q); /* Wake up application */
|
|
}
|
|
|
|
if (masked.trdy) /* Transmitter ready? */
|
|
{
|
|
found = 1;
|
|
if (port->out_count > 0) /* More data to send */
|
|
send_word(port);
|
|
else /* transmission finished */
|
|
{
|
|
reg_sser_rw_intr_mask intr_mask;
|
|
intr_mask = REG_RD(sser, port->regi_sser, rw_intr_mask);
|
|
intr_mask.trdy = 0;
|
|
REG_WR(sser, port->regi_sser, rw_intr_mask, intr_mask);
|
|
wake_up_interruptible(&port->out_wait_q); /* Wake up application */
|
|
}
|
|
}
|
|
}
|
|
return IRQ_RETVAL(found);
|
|
}
|
|
#endif
|
|
|
|
module_init(etrax_sync_serial_init);
|