original_kernel/drivers/input/touchscreen/tsc200x-core.h

79 lines
2.5 KiB
C

#ifndef _TSC200X_CORE_H
#define _TSC200X_CORE_H
/* control byte 1 */
#define TSC200X_CMD 0x80
#define TSC200X_CMD_NORMAL 0x00
#define TSC200X_CMD_STOP 0x01
#define TSC200X_CMD_12BIT 0x04
/* control byte 0 */
#define TSC200X_REG_READ 0x01 /* R/W access */
#define TSC200X_REG_PND0 0x02 /* Power Not Down Control */
#define TSC200X_REG_X (0x0 << 3)
#define TSC200X_REG_Y (0x1 << 3)
#define TSC200X_REG_Z1 (0x2 << 3)
#define TSC200X_REG_Z2 (0x3 << 3)
#define TSC200X_REG_AUX (0x4 << 3)
#define TSC200X_REG_TEMP1 (0x5 << 3)
#define TSC200X_REG_TEMP2 (0x6 << 3)
#define TSC200X_REG_STATUS (0x7 << 3)
#define TSC200X_REG_AUX_HIGH (0x8 << 3)
#define TSC200X_REG_AUX_LOW (0x9 << 3)
#define TSC200X_REG_TEMP_HIGH (0xA << 3)
#define TSC200X_REG_TEMP_LOW (0xB << 3)
#define TSC200X_REG_CFR0 (0xC << 3)
#define TSC200X_REG_CFR1 (0xD << 3)
#define TSC200X_REG_CFR2 (0xE << 3)
#define TSC200X_REG_CONV_FUNC (0xF << 3)
/* configuration register 0 */
#define TSC200X_CFR0_PRECHARGE_276US 0x0040
#define TSC200X_CFR0_STABTIME_1MS 0x0300
#define TSC200X_CFR0_CLOCK_1MHZ 0x1000
#define TSC200X_CFR0_RESOLUTION12 0x2000
#define TSC200X_CFR0_PENMODE 0x8000
#define TSC200X_CFR0_INITVALUE (TSC200X_CFR0_STABTIME_1MS | \
TSC200X_CFR0_CLOCK_1MHZ | \
TSC200X_CFR0_RESOLUTION12 | \
TSC200X_CFR0_PRECHARGE_276US | \
TSC200X_CFR0_PENMODE)
/* bits common to both read and write of configuration register 0 */
#define TSC200X_CFR0_RW_MASK 0x3fff
/* configuration register 1 */
#define TSC200X_CFR1_BATCHDELAY_4MS 0x0003
#define TSC200X_CFR1_INITVALUE TSC200X_CFR1_BATCHDELAY_4MS
/* configuration register 2 */
#define TSC200X_CFR2_MAVE_Z 0x0004
#define TSC200X_CFR2_MAVE_Y 0x0008
#define TSC200X_CFR2_MAVE_X 0x0010
#define TSC200X_CFR2_AVG_7 0x0800
#define TSC200X_CFR2_MEDIUM_15 0x3000
#define TSC200X_CFR2_INITVALUE (TSC200X_CFR2_MAVE_X | \
TSC200X_CFR2_MAVE_Y | \
TSC200X_CFR2_MAVE_Z | \
TSC200X_CFR2_MEDIUM_15 | \
TSC200X_CFR2_AVG_7)
#define MAX_12BIT 0xfff
#define TSC200X_DEF_X_FUZZ 4
#define TSC200X_DEF_Y_FUZZ 8
#define TSC200X_DEF_P_FUZZ 2
#define TSC200X_DEF_RESISTOR 280
#define TSC2005_SPI_MAX_SPEED_HZ 10000000
#define TSC200X_PENUP_TIME_MS 40
extern const struct regmap_config tsc200x_regmap_config;
extern const struct dev_pm_ops tsc200x_pm_ops;
int tsc200x_probe(struct device *dev, int irq, __u16 bustype,
struct regmap *regmap,
int (*tsc200x_cmd)(struct device *dev, u8 cmd));
int tsc200x_remove(struct device *dev);
#endif