473 lines
14 KiB
C
473 lines
14 KiB
C
#ifndef __LINUX_UHCI_HCD_H
|
|
#define __LINUX_UHCI_HCD_H
|
|
|
|
#include <linux/list.h>
|
|
#include <linux/usb.h>
|
|
|
|
#define usb_packetid(pipe) (usb_pipein(pipe) ? USB_PID_IN : USB_PID_OUT)
|
|
#define PIPE_DEVEP_MASK 0x0007ff00
|
|
|
|
|
|
/*
|
|
* Universal Host Controller Interface data structures and defines
|
|
*/
|
|
|
|
/* Command register */
|
|
#define USBCMD 0
|
|
#define USBCMD_RS 0x0001 /* Run/Stop */
|
|
#define USBCMD_HCRESET 0x0002 /* Host reset */
|
|
#define USBCMD_GRESET 0x0004 /* Global reset */
|
|
#define USBCMD_EGSM 0x0008 /* Global Suspend Mode */
|
|
#define USBCMD_FGR 0x0010 /* Force Global Resume */
|
|
#define USBCMD_SWDBG 0x0020 /* SW Debug mode */
|
|
#define USBCMD_CF 0x0040 /* Config Flag (sw only) */
|
|
#define USBCMD_MAXP 0x0080 /* Max Packet (0 = 32, 1 = 64) */
|
|
|
|
/* Status register */
|
|
#define USBSTS 2
|
|
#define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */
|
|
#define USBSTS_ERROR 0x0002 /* Interrupt due to error */
|
|
#define USBSTS_RD 0x0004 /* Resume Detect */
|
|
#define USBSTS_HSE 0x0008 /* Host System Error - basically PCI problems */
|
|
#define USBSTS_HCPE 0x0010 /* Host Controller Process Error - the scripts were buggy */
|
|
#define USBSTS_HCH 0x0020 /* HC Halted */
|
|
|
|
/* Interrupt enable register */
|
|
#define USBINTR 4
|
|
#define USBINTR_TIMEOUT 0x0001 /* Timeout/CRC error enable */
|
|
#define USBINTR_RESUME 0x0002 /* Resume interrupt enable */
|
|
#define USBINTR_IOC 0x0004 /* Interrupt On Complete enable */
|
|
#define USBINTR_SP 0x0008 /* Short packet interrupt enable */
|
|
|
|
#define USBFRNUM 6
|
|
#define USBFLBASEADD 8
|
|
#define USBSOF 12
|
|
#define USBSOF_DEFAULT 64 /* Frame length is exactly 1 ms */
|
|
|
|
/* USB port status and control registers */
|
|
#define USBPORTSC1 16
|
|
#define USBPORTSC2 18
|
|
#define USBPORTSC_CCS 0x0001 /* Current Connect Status ("device present") */
|
|
#define USBPORTSC_CSC 0x0002 /* Connect Status Change */
|
|
#define USBPORTSC_PE 0x0004 /* Port Enable */
|
|
#define USBPORTSC_PEC 0x0008 /* Port Enable Change */
|
|
#define USBPORTSC_DPLUS 0x0010 /* D+ high (line status) */
|
|
#define USBPORTSC_DMINUS 0x0020 /* D- high (line status) */
|
|
#define USBPORTSC_RD 0x0040 /* Resume Detect */
|
|
#define USBPORTSC_RES1 0x0080 /* reserved, always 1 */
|
|
#define USBPORTSC_LSDA 0x0100 /* Low Speed Device Attached */
|
|
#define USBPORTSC_PR 0x0200 /* Port Reset */
|
|
/* OC and OCC from Intel 430TX and later (not UHCI 1.1d spec) */
|
|
#define USBPORTSC_OC 0x0400 /* Over Current condition */
|
|
#define USBPORTSC_OCC 0x0800 /* Over Current Change R/WC */
|
|
#define USBPORTSC_SUSP 0x1000 /* Suspend */
|
|
#define USBPORTSC_RES2 0x2000 /* reserved, write zeroes */
|
|
#define USBPORTSC_RES3 0x4000 /* reserved, write zeroes */
|
|
#define USBPORTSC_RES4 0x8000 /* reserved, write zeroes */
|
|
|
|
/* Legacy support register */
|
|
#define USBLEGSUP 0xc0
|
|
#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */
|
|
#define USBLEGSUP_RWC 0x8f00 /* the R/WC bits */
|
|
#define USBLEGSUP_RO 0x5040 /* R/O and reserved bits */
|
|
|
|
#define UHCI_PTR_BITS cpu_to_le32(0x000F)
|
|
#define UHCI_PTR_TERM cpu_to_le32(0x0001)
|
|
#define UHCI_PTR_QH cpu_to_le32(0x0002)
|
|
#define UHCI_PTR_DEPTH cpu_to_le32(0x0004)
|
|
#define UHCI_PTR_BREADTH cpu_to_le32(0x0000)
|
|
|
|
#define UHCI_NUMFRAMES 1024 /* in the frame list [array] */
|
|
#define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */
|
|
#define CAN_SCHEDULE_FRAMES 1000 /* how far future frames can be scheduled */
|
|
|
|
|
|
/*
|
|
* Queue Headers
|
|
*/
|
|
|
|
/*
|
|
* One role of a QH is to hold a queue of TDs for some endpoint. Each QH is
|
|
* used with one URB, and qh->element (updated by the HC) is either:
|
|
* - the next unprocessed TD for the URB, or
|
|
* - UHCI_PTR_TERM (when there's no more traffic for this endpoint), or
|
|
* - the QH for the next URB queued to the same endpoint.
|
|
*
|
|
* The other role of a QH is to serve as a "skeleton" framelist entry, so we
|
|
* can easily splice a QH for some endpoint into the schedule at the right
|
|
* place. Then qh->element is UHCI_PTR_TERM.
|
|
*
|
|
* In the frame list, qh->link maintains a list of QHs seen by the HC:
|
|
* skel1 --> ep1-qh --> ep2-qh --> ... --> skel2 --> ...
|
|
*/
|
|
struct uhci_qh {
|
|
/* Hardware fields */
|
|
__le32 link; /* Next queue */
|
|
__le32 element; /* Queue element pointer */
|
|
|
|
/* Software fields */
|
|
dma_addr_t dma_handle;
|
|
|
|
struct urb_priv *urbp;
|
|
|
|
struct list_head list;
|
|
struct list_head remove_list;
|
|
} __attribute__((aligned(16)));
|
|
|
|
/*
|
|
* We need a special accessor for the element pointer because it is
|
|
* subject to asynchronous updates by the controller.
|
|
*/
|
|
static __le32 inline qh_element(struct uhci_qh *qh) {
|
|
__le32 element = qh->element;
|
|
|
|
barrier();
|
|
return element;
|
|
}
|
|
|
|
|
|
/*
|
|
* Transfer Descriptors
|
|
*/
|
|
|
|
/*
|
|
* for TD <status>:
|
|
*/
|
|
#define TD_CTRL_SPD (1 << 29) /* Short Packet Detect */
|
|
#define TD_CTRL_C_ERR_MASK (3 << 27) /* Error Counter bits */
|
|
#define TD_CTRL_C_ERR_SHIFT 27
|
|
#define TD_CTRL_LS (1 << 26) /* Low Speed Device */
|
|
#define TD_CTRL_IOS (1 << 25) /* Isochronous Select */
|
|
#define TD_CTRL_IOC (1 << 24) /* Interrupt on Complete */
|
|
#define TD_CTRL_ACTIVE (1 << 23) /* TD Active */
|
|
#define TD_CTRL_STALLED (1 << 22) /* TD Stalled */
|
|
#define TD_CTRL_DBUFERR (1 << 21) /* Data Buffer Error */
|
|
#define TD_CTRL_BABBLE (1 << 20) /* Babble Detected */
|
|
#define TD_CTRL_NAK (1 << 19) /* NAK Received */
|
|
#define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */
|
|
#define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */
|
|
#define TD_CTRL_ACTLEN_MASK 0x7FF /* actual length, encoded as n - 1 */
|
|
|
|
#define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \
|
|
TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF)
|
|
|
|
#define uhci_maxerr(err) ((err) << TD_CTRL_C_ERR_SHIFT)
|
|
#define uhci_status_bits(ctrl_sts) ((ctrl_sts) & 0xF60000)
|
|
#define uhci_actual_length(ctrl_sts) (((ctrl_sts) + 1) & TD_CTRL_ACTLEN_MASK) /* 1-based */
|
|
|
|
/*
|
|
* for TD <info>: (a.k.a. Token)
|
|
*/
|
|
#define td_token(td) le32_to_cpu((td)->token)
|
|
#define TD_TOKEN_DEVADDR_SHIFT 8
|
|
#define TD_TOKEN_TOGGLE_SHIFT 19
|
|
#define TD_TOKEN_TOGGLE (1 << 19)
|
|
#define TD_TOKEN_EXPLEN_SHIFT 21
|
|
#define TD_TOKEN_EXPLEN_MASK 0x7FF /* expected length, encoded as n - 1 */
|
|
#define TD_TOKEN_PID_MASK 0xFF
|
|
|
|
#define uhci_explen(len) ((((len) - 1) & TD_TOKEN_EXPLEN_MASK) << \
|
|
TD_TOKEN_EXPLEN_SHIFT)
|
|
|
|
#define uhci_expected_length(token) ((((token) >> TD_TOKEN_EXPLEN_SHIFT) + \
|
|
1) & TD_TOKEN_EXPLEN_MASK)
|
|
#define uhci_toggle(token) (((token) >> TD_TOKEN_TOGGLE_SHIFT) & 1)
|
|
#define uhci_endpoint(token) (((token) >> 15) & 0xf)
|
|
#define uhci_devaddr(token) (((token) >> TD_TOKEN_DEVADDR_SHIFT) & 0x7f)
|
|
#define uhci_devep(token) (((token) >> TD_TOKEN_DEVADDR_SHIFT) & 0x7ff)
|
|
#define uhci_packetid(token) ((token) & TD_TOKEN_PID_MASK)
|
|
#define uhci_packetout(token) (uhci_packetid(token) != USB_PID_IN)
|
|
#define uhci_packetin(token) (uhci_packetid(token) == USB_PID_IN)
|
|
|
|
/*
|
|
* The documentation says "4 words for hardware, 4 words for software".
|
|
*
|
|
* That's silly, the hardware doesn't care. The hardware only cares that
|
|
* the hardware words are 16-byte aligned, and we can have any amount of
|
|
* sw space after the TD entry.
|
|
*
|
|
* td->link points to either another TD (not necessarily for the same urb or
|
|
* even the same endpoint), or nothing (PTR_TERM), or a QH (for queued urbs).
|
|
*/
|
|
struct uhci_td {
|
|
/* Hardware fields */
|
|
__le32 link;
|
|
__le32 status;
|
|
__le32 token;
|
|
__le32 buffer;
|
|
|
|
/* Software fields */
|
|
dma_addr_t dma_handle;
|
|
|
|
struct list_head list;
|
|
struct list_head remove_list;
|
|
|
|
int frame; /* for iso: what frame? */
|
|
struct list_head fl_list;
|
|
} __attribute__((aligned(16)));
|
|
|
|
/*
|
|
* We need a special accessor for the control/status word because it is
|
|
* subject to asynchronous updates by the controller.
|
|
*/
|
|
static u32 inline td_status(struct uhci_td *td) {
|
|
__le32 status = td->status;
|
|
|
|
barrier();
|
|
return le32_to_cpu(status);
|
|
}
|
|
|
|
|
|
/*
|
|
* Skeleton Queue Headers
|
|
*/
|
|
|
|
/*
|
|
* The UHCI driver places Interrupt, Control and Bulk into QHs both
|
|
* to group together TDs for one transfer, and also to facilitate queuing
|
|
* of URBs. To make it easy to insert entries into the schedule, we have
|
|
* a skeleton of QHs for each predefined Interrupt latency, low-speed
|
|
* control, full-speed control and terminating QH (see explanation for
|
|
* the terminating QH below).
|
|
*
|
|
* When we want to add a new QH, we add it to the end of the list for the
|
|
* skeleton QH.
|
|
*
|
|
* For instance, the queue can look like this:
|
|
*
|
|
* skel int128 QH
|
|
* dev 1 interrupt QH
|
|
* dev 5 interrupt QH
|
|
* skel int64 QH
|
|
* skel int32 QH
|
|
* ...
|
|
* skel int1 QH
|
|
* skel low-speed control QH
|
|
* dev 5 control QH
|
|
* skel full-speed control QH
|
|
* skel bulk QH
|
|
* dev 1 bulk QH
|
|
* dev 2 bulk QH
|
|
* skel terminating QH
|
|
*
|
|
* The terminating QH is used for 2 reasons:
|
|
* - To place a terminating TD which is used to workaround a PIIX bug
|
|
* (see Intel errata for explanation), and
|
|
* - To loop back to the full-speed control queue for full-speed bandwidth
|
|
* reclamation.
|
|
*
|
|
* Isochronous transfers are stored before the start of the skeleton
|
|
* schedule and don't use QHs. While the UHCI spec doesn't forbid the
|
|
* use of QHs for Isochronous, it doesn't use them either. And the spec
|
|
* says that queues never advance on an error completion status, which
|
|
* makes them totally unsuitable for Isochronous transfers.
|
|
*/
|
|
|
|
#define UHCI_NUM_SKELQH 12
|
|
#define skel_int128_qh skelqh[0]
|
|
#define skel_int64_qh skelqh[1]
|
|
#define skel_int32_qh skelqh[2]
|
|
#define skel_int16_qh skelqh[3]
|
|
#define skel_int8_qh skelqh[4]
|
|
#define skel_int4_qh skelqh[5]
|
|
#define skel_int2_qh skelqh[6]
|
|
#define skel_int1_qh skelqh[7]
|
|
#define skel_ls_control_qh skelqh[8]
|
|
#define skel_fs_control_qh skelqh[9]
|
|
#define skel_bulk_qh skelqh[10]
|
|
#define skel_term_qh skelqh[11]
|
|
|
|
/*
|
|
* Search tree for determining where <interval> fits in the skelqh[]
|
|
* skeleton.
|
|
*
|
|
* An interrupt request should be placed into the slowest skelqh[]
|
|
* which meets the interval/period/frequency requirement.
|
|
* An interrupt request is allowed to be faster than <interval> but not slower.
|
|
*
|
|
* For a given <interval>, this function returns the appropriate/matching
|
|
* skelqh[] index value.
|
|
*/
|
|
static inline int __interval_to_skel(int interval)
|
|
{
|
|
if (interval < 16) {
|
|
if (interval < 4) {
|
|
if (interval < 2)
|
|
return 7; /* int1 for 0-1 ms */
|
|
return 6; /* int2 for 2-3 ms */
|
|
}
|
|
if (interval < 8)
|
|
return 5; /* int4 for 4-7 ms */
|
|
return 4; /* int8 for 8-15 ms */
|
|
}
|
|
if (interval < 64) {
|
|
if (interval < 32)
|
|
return 3; /* int16 for 16-31 ms */
|
|
return 2; /* int32 for 32-63 ms */
|
|
}
|
|
if (interval < 128)
|
|
return 1; /* int64 for 64-127 ms */
|
|
return 0; /* int128 for 128-255 ms (Max.) */
|
|
}
|
|
|
|
|
|
/*
|
|
* The UHCI controller and root hub
|
|
*/
|
|
|
|
/*
|
|
* States for the root hub:
|
|
*
|
|
* To prevent "bouncing" in the presence of electrical noise,
|
|
* when there are no devices attached we delay for 1 second in the
|
|
* RUNNING_NODEVS state before switching to the AUTO_STOPPED state.
|
|
*
|
|
* (Note that the AUTO_STOPPED state won't be necessary once the hub
|
|
* driver learns to autosuspend.)
|
|
*/
|
|
enum uhci_rh_state {
|
|
/* In the following states the HC must be halted.
|
|
* These two must come first. */
|
|
UHCI_RH_RESET,
|
|
UHCI_RH_SUSPENDED,
|
|
|
|
UHCI_RH_AUTO_STOPPED,
|
|
UHCI_RH_RESUMING,
|
|
|
|
/* In this state the HC changes from running to halted,
|
|
* so it can legally appear either way. */
|
|
UHCI_RH_SUSPENDING,
|
|
|
|
/* In the following states it's an error if the HC is halted.
|
|
* These two must come last. */
|
|
UHCI_RH_RUNNING, /* The normal state */
|
|
UHCI_RH_RUNNING_NODEVS, /* Running with no devices attached */
|
|
};
|
|
|
|
/*
|
|
* The full UHCI controller information:
|
|
*/
|
|
struct uhci_hcd {
|
|
|
|
/* debugfs */
|
|
struct dentry *dentry;
|
|
|
|
/* Grabbed from PCI */
|
|
unsigned long io_addr;
|
|
|
|
struct dma_pool *qh_pool;
|
|
struct dma_pool *td_pool;
|
|
|
|
struct uhci_td *term_td; /* Terminating TD, see UHCI bug */
|
|
struct uhci_qh *skelqh[UHCI_NUM_SKELQH]; /* Skeleton QHs */
|
|
|
|
spinlock_t lock;
|
|
|
|
dma_addr_t frame_dma_handle; /* Hardware frame list */
|
|
__le32 *frame;
|
|
void **frame_cpu; /* CPU's frame list */
|
|
|
|
int fsbr; /* Full-speed bandwidth reclamation */
|
|
unsigned long fsbrtimeout; /* FSBR delay */
|
|
|
|
enum uhci_rh_state rh_state;
|
|
unsigned long auto_stop_time; /* When to AUTO_STOP */
|
|
|
|
unsigned int frame_number; /* As of last check */
|
|
unsigned int is_stopped;
|
|
#define UHCI_IS_STOPPED 9999 /* Larger than a frame # */
|
|
|
|
unsigned int scan_in_progress:1; /* Schedule scan is running */
|
|
unsigned int need_rescan:1; /* Redo the schedule scan */
|
|
unsigned int hc_inaccessible:1; /* HC is suspended or dead */
|
|
unsigned int working_RD:1; /* Suspended root hub doesn't
|
|
need to be polled */
|
|
|
|
/* Support for port suspend/resume/reset */
|
|
unsigned long port_c_suspend; /* Bit-arrays of ports */
|
|
unsigned long suspended_ports;
|
|
unsigned long resuming_ports;
|
|
unsigned long ports_timeout; /* Time to stop signalling */
|
|
|
|
/* Main list of URBs currently controlled by this HC */
|
|
struct list_head urb_list;
|
|
|
|
/* List of QHs that are done, but waiting to be unlinked (race) */
|
|
struct list_head qh_remove_list;
|
|
unsigned int qh_remove_age; /* Age in frames */
|
|
|
|
/* List of TDs that are done, but waiting to be freed (race) */
|
|
struct list_head td_remove_list;
|
|
unsigned int td_remove_age; /* Age in frames */
|
|
|
|
/* List of asynchronously unlinked URBs */
|
|
struct list_head urb_remove_list;
|
|
unsigned int urb_remove_age; /* Age in frames */
|
|
|
|
/* List of URBs awaiting completion callback */
|
|
struct list_head complete_list;
|
|
|
|
int rh_numports; /* Number of root-hub ports */
|
|
|
|
wait_queue_head_t waitqh; /* endpoint_disable waiters */
|
|
};
|
|
|
|
/* Convert between a usb_hcd pointer and the corresponding uhci_hcd */
|
|
static inline struct uhci_hcd *hcd_to_uhci(struct usb_hcd *hcd)
|
|
{
|
|
return (struct uhci_hcd *) (hcd->hcd_priv);
|
|
}
|
|
static inline struct usb_hcd *uhci_to_hcd(struct uhci_hcd *uhci)
|
|
{
|
|
return container_of((void *) uhci, struct usb_hcd, hcd_priv);
|
|
}
|
|
|
|
#define uhci_dev(u) (uhci_to_hcd(u)->self.controller)
|
|
|
|
|
|
/*
|
|
* Private per-URB data
|
|
*/
|
|
struct urb_priv {
|
|
struct list_head urb_list;
|
|
|
|
struct urb *urb;
|
|
|
|
struct uhci_qh *qh; /* QH for this URB */
|
|
struct list_head td_list;
|
|
|
|
unsigned fsbr : 1; /* URB turned on FSBR */
|
|
unsigned fsbr_timeout : 1; /* URB timed out on FSBR */
|
|
unsigned queued : 1; /* QH was queued (not linked in) */
|
|
unsigned short_control_packet : 1; /* If we get a short packet during */
|
|
/* a control transfer, retrigger */
|
|
/* the status phase */
|
|
|
|
unsigned long fsbrtime; /* In jiffies */
|
|
|
|
struct list_head queue_list;
|
|
};
|
|
|
|
|
|
/*
|
|
* Locking in uhci.c
|
|
*
|
|
* Almost everything relating to the hardware schedule and processing
|
|
* of URBs is protected by uhci->lock. urb->status is protected by
|
|
* urb->lock; that's the one exception.
|
|
*
|
|
* To prevent deadlocks, never lock uhci->lock while holding urb->lock.
|
|
* The safe order of locking is:
|
|
*
|
|
* #1 uhci->lock
|
|
* #2 urb->lock
|
|
*/
|
|
|
|
|
|
/* Some special IDs */
|
|
|
|
#define PCI_VENDOR_ID_GENESYS 0x17a0
|
|
#define PCI_DEVICE_ID_GL880S_UHCI 0x8083
|
|
|
|
#endif
|