d8aec3dbdf
When the Seagate Goflex USB3.0 device is attached to VIA xHCI
host, sometimes the device will downgrade mode to high speed.
By the USB analyzer, I found the device finished the link
training process and worked at superspeed mode. But the device
descriptor got from the device shows the device works at 2.1.
It is very strange and seems like the device controller of
Seagate Goflex has a little confusion.
The first 8 bytes of device descriptor should be:
12 01 00 03 00 00 00 09
But the first 8 bytes of wrong device descriptor are:
12 01 10 02 00 00 00 40
The wrong device descriptor caused the initialization of mass
storage failed. After a while, the device would be recognized
as a high speed device and works fine.
This patch will warm reset the device to fix the issue after
finding the bcdUSB field of device descriptor isn't 0x0300
but the speed mode of device is superspeed.
This patch should be backported to kernels as old as 3.2, or ones that
contain the commit
|
||
---|---|---|
.. | ||
Kconfig | ||
Makefile | ||
buffer.c | ||
config.c | ||
devices.c | ||
devio.c | ||
driver.c | ||
endpoint.c | ||
file.c | ||
generic.c | ||
hcd-pci.c | ||
hcd.c | ||
hub.c | ||
inode.c | ||
message.c | ||
notify.c | ||
otg_whitelist.h | ||
quirks.c | ||
sysfs.c | ||
urb.c | ||
usb.c | ||
usb.h |