657 lines
23 KiB
Plaintext
657 lines
23 KiB
Plaintext
# drivers/sound/Config.in
|
|
#
|
|
# 18 Apr 1998, Michael Elizabeth Chastain, <mailto:mec@shout.net>
|
|
# More hacking for modularisation.
|
|
#
|
|
# Prompt user for primary drivers.
|
|
|
|
config SOUND_BCM_CS4297A
|
|
tristate "Crystal Sound CS4297a (for Swarm)"
|
|
depends on SOUND_PRIME && SIBYTE_SWARM
|
|
help
|
|
The BCM91250A has a Crystal CS4297a on synchronous serial
|
|
port B (in addition to the DB-9 serial port). Say Y or M
|
|
here to enable the sound chip instead of the UART. Also
|
|
note that CONFIG_KGDB should not be enabled at the same
|
|
time, since it also attempts to use this UART port.
|
|
|
|
config SOUND_VWSND
|
|
tristate "SGI Visual Workstation Sound"
|
|
depends on SOUND_PRIME && X86_VISWS
|
|
help
|
|
Say Y or M if you have an SGI Visual Workstation and you want to be
|
|
able to use its on-board audio. Read
|
|
<file:Documentation/sound/oss/vwsnd> for more info on this driver's
|
|
capabilities.
|
|
|
|
config SOUND_HAL2
|
|
tristate "SGI HAL2 sound (EXPERIMENTAL)"
|
|
depends on SOUND_PRIME && SGI_IP22 && EXPERIMENTAL
|
|
help
|
|
Say Y or M if you have an SGI Indy or Indigo2 system and want to be able to
|
|
use its on-board A2 audio system.
|
|
|
|
config SOUND_AU1550_AC97
|
|
tristate "Au1550/Au1200 AC97 Sound"
|
|
select SND_AC97_CODEC
|
|
depends on SOUND_PRIME && (SOC_AU1550 || SOC_AU1200)
|
|
|
|
config SOUND_TRIDENT
|
|
tristate "Trident 4DWave DX/NX, SiS 7018 or ALi 5451 PCI Audio Core"
|
|
depends on SOUND_PRIME && PCI
|
|
---help---
|
|
Say Y or M if you have a PCI sound card utilizing the Trident
|
|
4DWave-DX/NX chipset or your mother board chipset has SiS 7018
|
|
or ALi 5451 built-in. The SiS 7018 PCI Audio Core is embedded
|
|
in SiS960 Super South Bridge and SiS540/630 Single Chipset.
|
|
The ALi 5451 PCI Audio Core is embedded in ALi M1535, M1535D,
|
|
M1535+ or M1535D+ South Bridge.
|
|
|
|
Use lspci -n to find out if your sound card or chipset uses
|
|
Trident 4DWave or SiS 7018. PCI ID 1023:2000 or 1023:2001 stands
|
|
for Trident 4Dwave. PCI ID 1039:7018 stands for SiS7018. PCI ID
|
|
10B9:5451 stands for ALi5451.
|
|
|
|
This driver supports S/PDIF in/out (record/playback) for ALi 5451
|
|
embedded in ALi M1535+ and M1535D+. Note that they aren't all
|
|
enabled by default; you can enable them by saying Y to "/proc file
|
|
system support" and "Sysctl support", and after the /proc file
|
|
system has been mounted, executing the command
|
|
|
|
command what is enabled
|
|
|
|
echo 0>/proc/ALi5451 pcm out is also set to S/PDIF out. (Default).
|
|
|
|
echo 1>/proc/ALi5451 use S/PDIF out to output pcm data.
|
|
|
|
echo 2>/proc/ALi5451 use S/PDIF out to output non-pcm data.
|
|
(AC3...).
|
|
|
|
echo 3>/proc/ALi5451 record from Ac97 in(MIC, Line in...).
|
|
(Default).
|
|
|
|
echo 4>/proc/ALi5451 no matter Ac97 settings, record from S/PDIF
|
|
in.
|
|
|
|
|
|
This driver differs slightly from OSS/Free, so PLEASE READ the
|
|
comments at the top of <file:sound/oss/trident.c>.
|
|
|
|
config SOUND_MSNDCLAS
|
|
tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
|
|
depends on SOUND_PRIME && (m || !STANDALONE)
|
|
help
|
|
Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
|
|
Monterey (not for the Pinnacle or Fiji).
|
|
|
|
See <file:Documentation/sound/oss/MultiSound> for important information
|
|
about this driver. Note that it has been discontinued, but the
|
|
Voyetra Turtle Beach knowledge base entry for it is still available
|
|
at <http://www.turtlebeach.com/site/kb_ftp/790.asp>.
|
|
|
|
comment "Compiled-in MSND Classic support requires firmware during compilation."
|
|
depends on SOUND_PRIME && SOUND_MSNDCLAS=y
|
|
|
|
config MSNDCLAS_HAVE_BOOT
|
|
bool
|
|
depends on SOUND_MSNDCLAS=y && !STANDALONE
|
|
default y
|
|
|
|
config MSNDCLAS_INIT_FILE
|
|
string "Full pathname of MSNDINIT.BIN firmware file"
|
|
depends on SOUND_MSNDCLAS
|
|
default "/etc/sound/msndinit.bin"
|
|
help
|
|
The MultiSound cards have two firmware files which are required for
|
|
operation, and are not currently included. These files can be
|
|
obtained from Turtle Beach. See
|
|
<file:Documentation/sound/oss/MultiSound> for information on how to
|
|
obtain this.
|
|
|
|
config MSNDCLAS_PERM_FILE
|
|
string "Full pathname of MSNDPERM.BIN firmware file"
|
|
depends on SOUND_MSNDCLAS
|
|
default "/etc/sound/msndperm.bin"
|
|
help
|
|
The MultiSound cards have two firmware files which are required for
|
|
operation, and are not currently included. These files can be
|
|
obtained from Turtle Beach. See
|
|
<file:Documentation/sound/oss/MultiSound> for information on how to
|
|
obtain this.
|
|
|
|
config MSNDCLAS_IRQ
|
|
int "MSND Classic IRQ 5, 7, 9, 10, 11, 12"
|
|
depends on SOUND_MSNDCLAS=y
|
|
default "5"
|
|
help
|
|
Interrupt Request line for the MultiSound Classic and related cards.
|
|
|
|
config MSNDCLAS_MEM
|
|
hex "MSND Classic memory B0000, C8000, D0000, D8000, E0000, E8000"
|
|
depends on SOUND_MSNDCLAS=y
|
|
default "D0000"
|
|
help
|
|
Memory-mapped I/O base address for the MultiSound Classic and
|
|
related cards.
|
|
|
|
config MSNDCLAS_IO
|
|
hex "MSND Classic I/O 210, 220, 230, 240, 250, 260, 290, 3E0"
|
|
depends on SOUND_MSNDCLAS=y
|
|
default "290"
|
|
help
|
|
I/O port address for the MultiSound Classic and related cards.
|
|
|
|
config SOUND_MSNDPIN
|
|
tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji"
|
|
depends on SOUND_PRIME && (m || !STANDALONE)
|
|
help
|
|
Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
|
|
See <file:Documentation/sound/oss/MultiSound> for important information
|
|
about this driver. Note that it has been discontinued, but the
|
|
Voyetra Turtle Beach knowledge base entry for it is still available
|
|
at <http://www.turtlebeach.com/site/kb_ftp/600.asp>.
|
|
|
|
comment "Compiled-in MSND Pinnacle support requires firmware during compilation."
|
|
depends on SOUND_PRIME && SOUND_MSNDPIN=y
|
|
|
|
config MSNDPIN_HAVE_BOOT
|
|
bool
|
|
depends on SOUND_MSNDPIN=y
|
|
default y
|
|
|
|
config MSNDPIN_INIT_FILE
|
|
string "Full pathname of PNDSPINI.BIN firmware file"
|
|
depends on SOUND_MSNDPIN
|
|
default "/etc/sound/pndspini.bin"
|
|
help
|
|
The MultiSound cards have two firmware files which are required
|
|
for operation, and are not currently included. These files can be
|
|
obtained from Turtle Beach. See
|
|
<file:Documentation/sound/oss/MultiSound> for information on how to
|
|
obtain this.
|
|
|
|
config MSNDPIN_PERM_FILE
|
|
string "Full pathname of PNDSPERM.BIN firmware file"
|
|
depends on SOUND_MSNDPIN
|
|
default "/etc/sound/pndsperm.bin"
|
|
help
|
|
The MultiSound cards have two firmware files which are required for
|
|
operation, and are not currently included. These files can be
|
|
obtained from Turtle Beach. See
|
|
<file:Documentation/sound/oss/MultiSound> for information on how to
|
|
obtain this.
|
|
|
|
config MSNDPIN_IRQ
|
|
int "MSND Pinnacle IRQ 5, 7, 9, 10, 11, 12"
|
|
depends on SOUND_MSNDPIN=y
|
|
default "5"
|
|
help
|
|
Interrupt request line for the primary synthesizer on MultiSound
|
|
Pinnacle and Fiji sound cards.
|
|
|
|
config MSNDPIN_MEM
|
|
hex "MSND Pinnacle memory B0000, C8000, D0000, D8000, E0000, E8000"
|
|
depends on SOUND_MSNDPIN=y
|
|
default "D0000"
|
|
help
|
|
Memory-mapped I/O base address for the primary synthesizer on
|
|
MultiSound Pinnacle and Fiji sound cards.
|
|
|
|
config MSNDPIN_IO
|
|
hex "MSND Pinnacle I/O 210, 220, 230, 240, 250, 260, 290, 3E0"
|
|
depends on SOUND_MSNDPIN=y
|
|
default "290"
|
|
help
|
|
Memory-mapped I/O base address for the primary synthesizer on
|
|
MultiSound Pinnacle and Fiji sound cards.
|
|
|
|
config MSNDPIN_DIGITAL
|
|
bool "MSND Pinnacle has S/PDIF I/O"
|
|
depends on SOUND_MSNDPIN=y
|
|
help
|
|
If you have the S/PDIF daughter board for the Pinnacle or Fiji,
|
|
answer Y here; otherwise, say N. If you have this, you will be able
|
|
to play and record from the S/PDIF port (digital signal). See
|
|
<file:Documentation/sound/oss/MultiSound> for information on how to make
|
|
use of this capability.
|
|
|
|
config MSNDPIN_NONPNP
|
|
bool "MSND Pinnacle non-PnP Mode"
|
|
depends on SOUND_MSNDPIN=y
|
|
help
|
|
The Pinnacle and Fiji card resources can be configured either with
|
|
PnP, or through a configuration port. Say Y here if your card is NOT
|
|
in PnP mode. For the Pinnacle, configuration in non-PnP mode allows
|
|
use of the IDE and joystick peripherals on the card as well; these
|
|
do not show up when the card is in PnP mode. Specifying zero for any
|
|
resource of a device will disable the device. If you are running the
|
|
card in PnP mode, you must say N here and use isapnptools to
|
|
configure the card's resources.
|
|
|
|
comment "MSND Pinnacle DSP section will be configured to above parameters."
|
|
depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP
|
|
|
|
config MSNDPIN_CFG
|
|
hex "MSND Pinnacle config port 250,260,270"
|
|
depends on MSNDPIN_NONPNP
|
|
default "250"
|
|
help
|
|
This is the port which the Pinnacle and Fiji uses to configure the
|
|
card's resources when not in PnP mode. If your card is in PnP mode,
|
|
then be sure to say N to the previous option, "MSND Pinnacle Non-PnP
|
|
Mode".
|
|
|
|
comment "Pinnacle-specific Device Configuration (0 disables)"
|
|
depends on SOUND_PRIME && SOUND_MSNDPIN=y && MSNDPIN_NONPNP
|
|
|
|
config MSNDPIN_MPU_IO
|
|
hex "MSND Pinnacle MPU I/O (e.g. 330)"
|
|
depends on MSNDPIN_NONPNP
|
|
default "0"
|
|
help
|
|
Memory-mapped I/O base address for the Kurzweil daughterboard
|
|
synthesizer on MultiSound Pinnacle and Fiji sound cards.
|
|
|
|
config MSNDPIN_MPU_IRQ
|
|
int "MSND Pinnacle MPU IRQ (e.g. 9)"
|
|
depends on MSNDPIN_NONPNP
|
|
default "0"
|
|
help
|
|
Interrupt request number for the Kurzweil daughterboard
|
|
synthesizer on MultiSound Pinnacle and Fiji sound cards.
|
|
|
|
config MSNDPIN_IDE_IO0
|
|
hex "MSND Pinnacle IDE I/O 0 (e.g. 170)"
|
|
depends on MSNDPIN_NONPNP
|
|
default "0"
|
|
help
|
|
CD-ROM drive 0 memory-mapped I/O base address for the MultiSound
|
|
Pinnacle and Fiji sound cards.
|
|
|
|
config MSNDPIN_IDE_IO1
|
|
hex "MSND Pinnacle IDE I/O 1 (e.g. 376)"
|
|
depends on MSNDPIN_NONPNP
|
|
default "0"
|
|
help
|
|
CD-ROM drive 1 memory-mapped I/O base address for the MultiSound
|
|
Pinnacle and Fiji sound cards.
|
|
|
|
config MSNDPIN_IDE_IRQ
|
|
int "MSND Pinnacle IDE IRQ (e.g. 15)"
|
|
depends on MSNDPIN_NONPNP
|
|
default "0"
|
|
help
|
|
Interrupt request number for the IDE CD-ROM interface on the
|
|
MultiSound Pinnacle and Fiji sound cards.
|
|
|
|
config MSNDPIN_JOYSTICK_IO
|
|
hex "MSND Pinnacle joystick I/O (e.g. 200)"
|
|
depends on MSNDPIN_NONPNP
|
|
default "0"
|
|
help
|
|
Memory-mapped I/O base address for the joystick port on MultiSound
|
|
Pinnacle and Fiji sound cards.
|
|
|
|
config MSND_FIFOSIZE
|
|
int "MSND buffer size (kB)"
|
|
depends on SOUND_PRIME && (SOUND_MSNDPIN=y || SOUND_MSNDCLAS=y)
|
|
default "128"
|
|
help
|
|
Configures the size of each audio buffer, in kilobytes, for
|
|
recording and playing in the MultiSound drivers (both the Classic
|
|
and Pinnacle). Larger values reduce the chance of data overruns at
|
|
the expense of overall latency. If unsure, use the default.
|
|
|
|
config SOUND_OSS
|
|
tristate "OSS sound modules"
|
|
depends on SOUND_PRIME && ISA_DMA_API && VIRT_TO_BUS
|
|
help
|
|
OSS is the Open Sound System suite of sound card drivers. They make
|
|
sound programming easier since they provide a common API. Say Y or
|
|
M here (the module will be called sound) if you haven't found a
|
|
driver for your sound card above, then pick your driver from the
|
|
list below.
|
|
|
|
config SOUND_TRACEINIT
|
|
bool "Verbose initialisation"
|
|
depends on SOUND_OSS
|
|
help
|
|
Verbose soundcard initialization -- affects the format of autoprobe
|
|
and initialization messages at boot time.
|
|
|
|
config SOUND_DMAP
|
|
bool "Persistent DMA buffers"
|
|
depends on SOUND_OSS
|
|
---help---
|
|
Linux can often have problems allocating DMA buffers for ISA sound
|
|
cards on machines with more than 16MB of RAM. This is because ISA
|
|
DMA buffers must exist below the 16MB boundary and it is quite
|
|
possible that a large enough free block in this region cannot be
|
|
found after the machine has been running for a while. If you say Y
|
|
here the DMA buffers (64Kb) will be allocated at boot time and kept
|
|
until the shutdown. This option is only useful if you said Y to
|
|
"OSS sound modules", above. If you said M to "OSS sound modules"
|
|
then you can get the persistent DMA buffer functionality by passing
|
|
the command-line argument "dmabuf=1" to the sound module.
|
|
|
|
Say Y unless you have 16MB or more RAM or a PCI sound card.
|
|
|
|
config SOUND_SSCAPE
|
|
tristate "Ensoniq SoundScape support"
|
|
depends on SOUND_OSS
|
|
depends on VIRT_TO_BUS
|
|
help
|
|
Answer Y if you have a sound card based on the Ensoniq SoundScape
|
|
chipset. Such cards are being manufactured at least by Ensoniq, Spea
|
|
and Reveal (Reveal makes also other cards).
|
|
|
|
If you compile the driver into the kernel, you have to add
|
|
"sscape=<io>,<irq>,<dma>,<mpuio>,<mpuirq>" to the kernel command
|
|
line.
|
|
|
|
|
|
config SOUND_VMIDI
|
|
tristate "Loopback MIDI device support"
|
|
depends on SOUND_OSS
|
|
help
|
|
Support for MIDI loopback on port 1 or 2.
|
|
|
|
config SOUND_TRIX
|
|
tristate "MediaTrix AudioTrix Pro support"
|
|
depends on SOUND_OSS
|
|
help
|
|
Answer Y if you have the AudioTriX Pro sound card manufactured
|
|
by MediaTrix.
|
|
|
|
config TRIX_HAVE_BOOT
|
|
bool "Have TRXPRO.HEX firmware file"
|
|
depends on SOUND_TRIX=y && !STANDALONE
|
|
help
|
|
The MediaTrix AudioTrix Pro has an on-board microcontroller which
|
|
needs to be initialized by downloading the code from the file
|
|
TRXPRO.HEX in the DOS driver directory. If you don't have the
|
|
TRXPRO.HEX file handy you may skip this step. However, the SB and
|
|
MPU-401 modes of AudioTrix Pro will not work without this file!
|
|
|
|
config TRIX_BOOT_FILE
|
|
string "Full pathname of TRXPRO.HEX firmware file"
|
|
depends on TRIX_HAVE_BOOT
|
|
default "/etc/sound/trxpro.hex"
|
|
help
|
|
Enter the full pathname of your TRXPRO.HEX file, starting from /.
|
|
|
|
config SOUND_MSS
|
|
tristate "Microsoft Sound System support"
|
|
depends on SOUND_OSS
|
|
---help---
|
|
Again think carefully before answering Y to this question. It's
|
|
safe to answer Y if you have the original Windows Sound System card
|
|
made by Microsoft or Aztech SG 16 Pro (or NX16 Pro). Also you may
|
|
say Y in case your card is NOT among these:
|
|
|
|
ATI Stereo F/X, AdLib, Audio Excell DSP16, Cardinal DSP16,
|
|
Ensoniq SoundScape (and compatibles made by Reveal and Spea),
|
|
Gravis Ultrasound, Gravis Ultrasound ACE, Gravis Ultrasound Max,
|
|
Gravis Ultrasound with 16 bit option, Logitech Sound Man 16,
|
|
Logitech SoundMan Games, Logitech SoundMan Wave, MAD16 Pro (OPTi
|
|
82C929), Media Vision Jazz16, MediaTriX AudioTriX Pro, Microsoft
|
|
Windows Sound System (MSS/WSS), Mozart (OAK OTI-601), Orchid
|
|
SW32, Personal Sound System (PSS), Pro Audio Spectrum 16, Pro
|
|
Audio Studio 16, Pro Sonic 16, Roland MPU-401 MIDI interface,
|
|
Sound Blaster 1.0, Sound Blaster 16, Sound Blaster 16ASP, Sound
|
|
Blaster 2.0, Sound Blaster AWE32, Sound Blaster Pro, TI TM4000M
|
|
notebook, ThunderBoard, Turtle Beach Tropez, Yamaha FM
|
|
synthesizers (OPL2, OPL3 and OPL4), 6850 UART MIDI Interface.
|
|
|
|
For cards having native support in VoxWare, consult the card
|
|
specific instructions in <file:Documentation/sound/oss/README.OSS>.
|
|
Some drivers have their own MSS support and saying Y to this option
|
|
will cause a conflict.
|
|
|
|
If you compile the driver into the kernel, you have to add
|
|
"ad1848=<io>,<irq>,<dma>,<dma2>[,<type>]" to the kernel command
|
|
line.
|
|
|
|
config SOUND_MPU401
|
|
tristate "MPU-401 support (NOT for SB16)"
|
|
depends on SOUND_OSS
|
|
---help---
|
|
Be careful with this question. The MPU401 interface is supported by
|
|
all sound cards. However, some natively supported cards have their
|
|
own driver for MPU401. Enabling this MPU401 option with these cards
|
|
will cause a conflict. Also, enabling MPU401 on a system that
|
|
doesn't really have a MPU401 could cause some trouble. If your card
|
|
was in the list of supported cards, look at the card specific
|
|
instructions in the <file:Documentation/sound/oss/README.OSS> file. It
|
|
is safe to answer Y if you have a true MPU401 MIDI interface card.
|
|
|
|
If you compile the driver into the kernel, you have to add
|
|
"mpu401=<io>,<irq>" to the kernel command line.
|
|
|
|
config SOUND_PAS
|
|
tristate "ProAudioSpectrum 16 support"
|
|
depends on SOUND_OSS
|
|
---help---
|
|
Answer Y only if you have a Pro Audio Spectrum 16, ProAudio Studio
|
|
16 or Logitech SoundMan 16 sound card. Answer N if you have some
|
|
other card made by Media Vision or Logitech since those are not
|
|
PAS16 compatible. Please read <file:Documentation/sound/oss/PAS16>.
|
|
It is not necessary to add Sound Blaster support separately; it
|
|
is included in PAS support.
|
|
|
|
If you compile the driver into the kernel, you have to add
|
|
"pas2=<io>,<irq>,<dma>,<dma2>,<sbio>,<sbirq>,<sbdma>,<sbdma2>
|
|
to the kernel command line.
|
|
|
|
config PAS_JOYSTICK
|
|
bool "Enable PAS16 joystick port"
|
|
depends on SOUND_PAS=y
|
|
help
|
|
Say Y here to enable the Pro Audio Spectrum 16's auxiliary joystick
|
|
port.
|
|
|
|
config SOUND_PSS
|
|
tristate "PSS (AD1848, ADSP-2115, ESC614) support"
|
|
depends on SOUND_OSS
|
|
help
|
|
Answer Y or M if you have an Orchid SW32, Cardinal DSP16, Beethoven
|
|
ADSP-16 or some other card based on the PSS chipset (AD1848 codec +
|
|
ADSP-2115 DSP chip + Echo ESC614 ASIC CHIP). For more information on
|
|
how to compile it into the kernel or as a module see the file
|
|
<file:Documentation/sound/oss/PSS>.
|
|
|
|
If you compile the driver into the kernel, you have to add
|
|
"pss=<io>,<mssio>,<mssirq>,<mssdma>,<mpuio>,<mpuirq>" to the kernel
|
|
command line.
|
|
|
|
config PSS_MIXER
|
|
bool "Enable PSS mixer (Beethoven ADSP-16 and other compatible)"
|
|
depends on SOUND_PSS
|
|
help
|
|
Answer Y for Beethoven ADSP-16. You may try to say Y also for other
|
|
cards if they have master volume, bass, treble, and you can't
|
|
control it under Linux. If you answer N for Beethoven ADSP-16, you
|
|
can't control master volume, bass, treble and synth volume.
|
|
|
|
If you said M to "PSS support" above, you may enable or disable this
|
|
PSS mixer with the module parameter pss_mixer. For more information
|
|
see the file <file:Documentation/sound/oss/PSS>.
|
|
|
|
config PSS_HAVE_BOOT
|
|
bool "Have DSPxxx.LD firmware file"
|
|
depends on SOUND_PSS && !STANDALONE
|
|
help
|
|
If you have the DSPxxx.LD file or SYNTH.LD file for you card, say Y
|
|
to include this file. Without this file the synth device (OPL) may
|
|
not work.
|
|
|
|
config PSS_BOOT_FILE
|
|
string "Full pathname of DSPxxx.LD firmware file"
|
|
depends on PSS_HAVE_BOOT
|
|
default "/etc/sound/dsp001.ld"
|
|
help
|
|
Enter the full pathname of your DSPxxx.LD file or SYNTH.LD file,
|
|
starting from /.
|
|
|
|
config SOUND_SB
|
|
tristate "100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support"
|
|
depends on SOUND_OSS
|
|
---help---
|
|
Answer Y if you have an original Sound Blaster card made by Creative
|
|
Labs or a 100% hardware compatible clone (like the Thunderboard or
|
|
SM Games). For an unknown card you may answer Y if the card claims
|
|
to be Sound Blaster-compatible.
|
|
|
|
Please read the file <file:Documentation/sound/oss/Soundblaster>.
|
|
|
|
You should also say Y here for cards based on the Avance Logic
|
|
ALS-007 and ALS-1X0 chips (read <file:Documentation/sound/oss/ALS>) and
|
|
for cards based on ESS chips (read
|
|
<file:Documentation/sound/oss/ESS1868> and
|
|
<file:Documentation/sound/oss/ESS>). If you have an SB AWE 32 or SB AWE
|
|
64, say Y here and also to "AWE32 synth" below and read
|
|
<file:Documentation/sound/oss/INSTALL.awe>. If you have an IBM Mwave
|
|
card, say Y here and read <file:Documentation/sound/oss/mwave>.
|
|
|
|
If you compile the driver into the kernel and don't want to use
|
|
isapnp, you have to add "sb=<io>,<irq>,<dma>,<dma2>" to the kernel
|
|
command line.
|
|
|
|
You can say M here to compile this driver as a module; the module is
|
|
called sb.
|
|
|
|
config SOUND_YM3812
|
|
tristate "Yamaha FM synthesizer (YM3812/OPL-3) support"
|
|
depends on SOUND_OSS
|
|
---help---
|
|
Answer Y if your card has a FM chip made by Yamaha (OPL2/OPL3/OPL4).
|
|
Answering Y is usually a safe and recommended choice, however some
|
|
cards may have software (TSR) FM emulation. Enabling FM support with
|
|
these cards may cause trouble (I don't currently know of any such
|
|
cards, however). Please read the file
|
|
<file:Documentation/sound/oss/OPL3> if your card has an OPL3 chip.
|
|
|
|
If you compile the driver into the kernel, you have to add
|
|
"opl3=<io>" to the kernel command line.
|
|
|
|
If unsure, say Y.
|
|
|
|
config SOUND_UART6850
|
|
tristate "6850 UART support"
|
|
depends on SOUND_OSS
|
|
help
|
|
This option enables support for MIDI interfaces based on the 6850
|
|
UART chip. This interface is rarely found on sound cards. It's safe
|
|
to answer N to this question.
|
|
|
|
If you compile the driver into the kernel, you have to add
|
|
"uart6850=<io>,<irq>" to the kernel command line.
|
|
|
|
config SOUND_AEDSP16
|
|
tristate "Gallant Audio Cards (SC-6000 and SC-6600 based)"
|
|
depends on SOUND_OSS
|
|
---help---
|
|
Answer Y if you have a Gallant's Audio Excel DSP 16 card. This
|
|
driver supports Audio Excel DSP 16 but not the III nor PnP versions
|
|
of this card.
|
|
|
|
The Gallant's Audio Excel DSP 16 card can emulate either an SBPro or
|
|
a Microsoft Sound System card, so you should have said Y to either
|
|
"100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) support"
|
|
or "Microsoft Sound System support", above, and you need to answer
|
|
the "MSS emulation" and "SBPro emulation" questions below
|
|
accordingly. You should say Y to one and only one of these two
|
|
questions.
|
|
|
|
Read the <file:Documentation/sound/oss/README.OSS> file and the head of
|
|
<file:sound/oss/aedsp16.c> as well as
|
|
<file:Documentation/sound/oss/AudioExcelDSP16> to get more information
|
|
about this driver and its configuration.
|
|
|
|
config SC6600
|
|
bool "SC-6600 based audio cards (new Audio Excel DSP 16)"
|
|
depends on SOUND_AEDSP16
|
|
help
|
|
The SC6600 is the new version of DSP mounted on the Audio Excel DSP
|
|
16 cards. Find in the manual the FCC ID of your audio card and
|
|
answer Y if you have an SC6600 DSP.
|
|
|
|
config SC6600_JOY
|
|
bool "Activate SC-6600 Joystick Interface"
|
|
depends on SC6600
|
|
help
|
|
Say Y here in order to use the joystick interface of the Audio Excel
|
|
DSP 16 card.
|
|
|
|
config SC6600_CDROM
|
|
int "SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)"
|
|
depends on SC6600
|
|
default "4"
|
|
help
|
|
This is used to activate the CD-ROM interface of the Audio Excel
|
|
DSP 16 card. Enter: 0 for Sony, 1 for Panasonic, 2 for IDE, 4 for no
|
|
CD-ROM present.
|
|
|
|
config SC6600_CDROMBASE
|
|
hex "SC-6600 CDROM Interface I/O Address"
|
|
depends on SC6600
|
|
default "0"
|
|
help
|
|
Base I/O port address for the CD-ROM interface of the Audio Excel
|
|
DSP 16 card.
|
|
|
|
choice
|
|
prompt "Audio Excel DSP 16"
|
|
optional
|
|
depends on SOUND_AEDSP16
|
|
|
|
config AEDSP16_MSS
|
|
bool "MSS emulation"
|
|
depends on SOUND_MSS
|
|
help
|
|
Answer Y if you want your audio card to emulate Microsoft Sound
|
|
System. You should then say Y to "Microsoft Sound System support"
|
|
and say N to "Audio Excel DSP 16 (SBPro emulation)".
|
|
|
|
config AEDSP16_SBPRO
|
|
bool "SBPro emulation"
|
|
depends on SOUND_SB
|
|
help
|
|
Answer Y if you want your audio card to emulate Sound Blaster Pro.
|
|
You should then say Y to "100% Sound Blaster compatibles
|
|
(SB16/32/64, ESS, Jazz16) support" and N to "Audio Excel DSP 16 (MSS
|
|
emulation)".
|
|
|
|
If you compile the driver into the kernel, you have to add
|
|
"aedsp16=<io>,<irq>,<dma>,<mssio>,<mpuio>,<mouirq>" to the kernel
|
|
command line.
|
|
|
|
endchoice
|
|
|
|
config SOUND_VIDC
|
|
tristate "VIDC 16-bit sound"
|
|
depends on ARM && (ARCH_ACORN || ARCH_CLPS7500) && SOUND_OSS
|
|
help
|
|
16-bit support for the VIDC onboard sound hardware found on Acorn
|
|
machines.
|
|
|
|
config SOUND_WAVEARTIST
|
|
tristate "Netwinder WaveArtist"
|
|
depends on ARM && SOUND_OSS && ARCH_NETWINDER
|
|
help
|
|
Say Y here to include support for the Rockwell WaveArtist sound
|
|
system. This driver is mainly for the NetWinder.
|
|
|
|
config SOUND_KAHLUA
|
|
tristate "XpressAudio Sound Blaster emulation"
|
|
depends on SOUND_SB
|
|
|
|
config SOUND_SH_DAC_AUDIO
|
|
tristate "SuperH DAC audio support"
|
|
depends on SOUND_PRIME && CPU_SH3
|
|
|
|
config SOUND_SH_DAC_AUDIO_CHANNEL
|
|
int "DAC channel"
|
|
default "1"
|
|
depends on SOUND_SH_DAC_AUDIO
|