316 lines
8.0 KiB
C
316 lines
8.0 KiB
C
/*
|
|
* File: arch/blackfin/mach-bf533/ip0x.c
|
|
* Based on: arch/blackfin/mach-bf533/bf1.c
|
|
* Based on: arch/blackfin/mach-bf533/stamp.c
|
|
* Author: Ivan Danov <idanov@gmail.com>
|
|
* Modified for IP0X David Rowe
|
|
*
|
|
* Created: 2007
|
|
* Description: Board info file for the IP04/IP08 boards, which
|
|
* are derived from the BlackfinOne V2.0 boards.
|
|
*
|
|
* Modified:
|
|
* COpyright 2007 David Rowe
|
|
* Copyright 2006 Intratrade Ltd.
|
|
* Copyright 2005 National ICT Australia (NICTA)
|
|
* Copyright 2004-2006 Analog Devices Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, see the file COPYING, or write
|
|
* to the Free Software Foundation, Inc.,
|
|
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/flash.h>
|
|
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
|
|
#include <linux/usb/isp1362.h>
|
|
#endif
|
|
#include <asm/irq.h>
|
|
#include <asm/bfin5xx_spi.h>
|
|
|
|
/*
|
|
* Name the Board for the /proc/cpuinfo
|
|
*/
|
|
const char bfin_board_name[] = "IP04/IP08";
|
|
|
|
/*
|
|
* Driver needs to know address, irq and flag pin.
|
|
*/
|
|
#if defined(CONFIG_BFIN532_IP0X)
|
|
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
|
|
|
|
#include <linux/dm9000.h>
|
|
|
|
static struct resource dm9000_resource1[] = {
|
|
{
|
|
.start = 0x20100000,
|
|
.end = 0x20100000 + 1,
|
|
.flags = IORESOURCE_MEM
|
|
},{
|
|
.start = 0x20100000 + 2,
|
|
.end = 0x20100000 + 3,
|
|
.flags = IORESOURCE_MEM
|
|
},{
|
|
.start = IRQ_PF15,
|
|
.end = IRQ_PF15,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
|
|
}
|
|
};
|
|
|
|
static struct resource dm9000_resource2[] = {
|
|
{
|
|
.start = 0x20200000,
|
|
.end = 0x20200000 + 1,
|
|
.flags = IORESOURCE_MEM
|
|
},{
|
|
.start = 0x20200000 + 2,
|
|
.end = 0x20200000 + 3,
|
|
.flags = IORESOURCE_MEM
|
|
},{
|
|
.start = IRQ_PF14,
|
|
.end = IRQ_PF14,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
|
|
}
|
|
};
|
|
|
|
/*
|
|
* for the moment we limit ourselves to 16bit IO until some
|
|
* better IO routines can be written and tested
|
|
*/
|
|
static struct dm9000_plat_data dm9000_platdata1 = {
|
|
.flags = DM9000_PLATF_16BITONLY,
|
|
};
|
|
|
|
static struct platform_device dm9000_device1 = {
|
|
.name = "dm9000",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(dm9000_resource1),
|
|
.resource = dm9000_resource1,
|
|
.dev = {
|
|
.platform_data = &dm9000_platdata1,
|
|
}
|
|
};
|
|
|
|
static struct dm9000_plat_data dm9000_platdata2 = {
|
|
.flags = DM9000_PLATF_16BITONLY,
|
|
};
|
|
|
|
static struct platform_device dm9000_device2 = {
|
|
.name = "dm9000",
|
|
.id = 1,
|
|
.num_resources = ARRAY_SIZE(dm9000_resource2),
|
|
.resource = dm9000_resource2,
|
|
.dev = {
|
|
.platform_data = &dm9000_platdata2,
|
|
}
|
|
};
|
|
|
|
#endif
|
|
#endif
|
|
|
|
|
|
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
|
|
/* all SPI peripherals info goes here */
|
|
|
|
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
|
|
static struct bfin5xx_spi_chip spi_mmc_chip_info = {
|
|
/*
|
|
* CPOL (Clock Polarity)
|
|
* 0 - Active high SCK
|
|
* 1 - Active low SCK
|
|
* CPHA (Clock Phase) Selects transfer format and operation mode
|
|
* 0 - SCLK toggles from middle of the first data bit, slave select
|
|
* pins controlled by hardware.
|
|
* 1 - SCLK toggles from beginning of first data bit, slave select
|
|
* pins controller by user software.
|
|
* .ctl_reg = 0x1c00, * CPOL=1,CPHA=1,Sandisk 1G work
|
|
* NO NO .ctl_reg = 0x1800, * CPOL=1,CPHA=0
|
|
* NO NO .ctl_reg = 0x1400, * CPOL=0,CPHA=1
|
|
*/
|
|
.ctl_reg = 0x1000, /* CPOL=0,CPHA=0,Sandisk 1G work */
|
|
.enable_dma = 0, /* if 1 - block!!! */
|
|
.bits_per_word = 8,
|
|
.cs_change_per_word = 0,
|
|
};
|
|
#endif
|
|
|
|
/* Notice: for blackfin, the speed_hz is the value of register
|
|
* SPI_BAUD, not the real baudrate */
|
|
static struct spi_board_info bfin_spi_board_info[] __initdata = {
|
|
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
|
|
{
|
|
.modalias = "spi_mmc",
|
|
.max_speed_hz = 2,
|
|
.bus_num = 1,
|
|
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
|
|
.platform_data = NULL,
|
|
.controller_data = &spi_mmc_chip_info,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
/* SPI controller data */
|
|
static struct bfin5xx_spi_master spi_bfin_master_info = {
|
|
.num_chipselect = 8,
|
|
.enable_dma = 1, /* master has the ability to do dma transfer */
|
|
};
|
|
|
|
static struct platform_device spi_bfin_master_device = {
|
|
.name = "bfin-spi-master",
|
|
.id = 1, /* Bus number */
|
|
.dev = {
|
|
.platform_data = &spi_bfin_master_info, /* Passed to driver */
|
|
},
|
|
};
|
|
#endif /* spi master and devices */
|
|
|
|
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
|
|
static struct resource bfin_uart_resources[] = {
|
|
{
|
|
.start = 0xFFC00400,
|
|
.end = 0xFFC004FF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device bfin_uart_device = {
|
|
.name = "bfin-uart",
|
|
.id = 1,
|
|
.num_resources = ARRAY_SIZE(bfin_uart_resources),
|
|
.resource = bfin_uart_resources,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
|
|
#ifdef CONFIG_BFIN_SIR0
|
|
static struct resource bfin_sir0_resources[] = {
|
|
{
|
|
.start = 0xFFC00400,
|
|
.end = 0xFFC004FF,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = IRQ_UART0_RX,
|
|
.end = IRQ_UART0_RX+1,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.start = CH_UART0_RX,
|
|
.end = CH_UART0_RX+1,
|
|
.flags = IORESOURCE_DMA,
|
|
},
|
|
};
|
|
|
|
static struct platform_device bfin_sir0_device = {
|
|
.name = "bfin_sir",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(bfin_sir0_resources),
|
|
.resource = bfin_sir0_resources,
|
|
};
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
|
|
static struct resource isp1362_hcd_resources[] = {
|
|
{
|
|
.start = 0x20300000,
|
|
.end = 0x20300000 + 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},{
|
|
.start = 0x20300000 + 2,
|
|
.end = 0x20300000 + 3,
|
|
.flags = IORESOURCE_MEM,
|
|
},{
|
|
.start = IRQ_PF11,
|
|
.end = IRQ_PF11,
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
|
|
},
|
|
};
|
|
|
|
static struct isp1362_platform_data isp1362_priv = {
|
|
.sel15Kres = 1,
|
|
.clknotstop = 0,
|
|
.oc_enable = 0, /* external OC */
|
|
.int_act_high = 0,
|
|
.int_edge_triggered = 0,
|
|
.remote_wakeup_connected = 0,
|
|
.no_power_switching = 1,
|
|
.power_switching_mode = 0,
|
|
};
|
|
|
|
static struct platform_device isp1362_hcd_device = {
|
|
.name = "isp1362-hcd",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &isp1362_priv,
|
|
},
|
|
.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
|
|
.resource = isp1362_hcd_resources,
|
|
};
|
|
#endif
|
|
|
|
|
|
static struct platform_device *ip0x_devices[] __initdata = {
|
|
#if defined(CONFIG_BFIN532_IP0X)
|
|
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
|
|
&dm9000_device1,
|
|
&dm9000_device2,
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
|
|
&spi_bfin_master_device,
|
|
#endif
|
|
|
|
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
|
|
&bfin_uart_device,
|
|
#endif
|
|
|
|
#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
|
|
#ifdef CONFIG_BFIN_SIR0
|
|
&bfin_sir0_device,
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
|
|
&isp1362_hcd_device,
|
|
#endif
|
|
};
|
|
|
|
static int __init ip0x_init(void)
|
|
{
|
|
int i;
|
|
|
|
printk(KERN_INFO "%s(): registering device resources\n", __func__);
|
|
platform_add_devices(ip0x_devices, ARRAY_SIZE(ip0x_devices));
|
|
|
|
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
|
|
for (i = 0; i < ARRAY_SIZE(bfin_spi_board_info); ++i) {
|
|
int j = 1 << bfin_spi_board_info[i].chip_select;
|
|
/* set spi cs to 1 */
|
|
bfin_write_FIO_DIR(bfin_read_FIO_DIR() | j);
|
|
bfin_write_FIO_FLAG_S(j);
|
|
}
|
|
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(ip0x_init);
|