8d813941b1
This gets the FEC ethernet driver working again on the lite5200 platform. The FEC driver is also compatible with the MPC5200, not only with the MPC5200B, so this adds a suitable entry to the driver's match list. Furthermore this adds the settings for the PHY in the dts file for the Lite5200. Note, that this is not exactly the same as in the Lite5200B, because the PHY is located at f0003000:01 for the 5200, and at :00 for the 5200B. This was tested on a Lite5200 and a Lite5200B, both booted a kernel via tftp and mounted the root via nfs successfully. Signed-off-by: René Bürgel <r.buergel@unicontrol.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org> |
||
|---|---|---|
| .. | ||
| dtc-src | ||
| dts | ||
| libfdt | ||
| .gitignore | ||
| 4xx.c | ||
| 4xx.h | ||
| 44x.h | ||
| Makefile | ||
| README | ||
| addRamDisk.c | ||
| addnote.c | ||
| bamboo.c | ||
| cpm-serial.c | ||
| crt0.S | ||
| cuboot-8xx.c | ||
| cuboot-52xx.c | ||
| cuboot-83xx.c | ||
| cuboot-85xx-cpm2.c | ||
| cuboot-85xx.c | ||
| cuboot-824x.c | ||
| cuboot-bamboo.c | ||
| cuboot-ebony.c | ||
| cuboot-katmai.c | ||
| cuboot-mpc7448hpc2.c | ||
| cuboot-pq2.c | ||
| cuboot-rainier.c | ||
| cuboot-sequoia.c | ||
| cuboot-taishan.c | ||
| cuboot-warp.c | ||
| cuboot.c | ||
| cuboot.h | ||
| dcr.h | ||
| devtree.c | ||
| div64.S | ||
| dummy.c | ||
| ebony.c | ||
| elf.h | ||
| elf_util.c | ||
| ep88xc.c | ||
| ep405.c | ||
| ep8248e.c | ||
| fixed-head.S | ||
| flatdevtree_env.h | ||
| fsl-soc.c | ||
| fsl-soc.h | ||
| gunzip_util.c | ||
| gunzip_util.h | ||
| hack-coff.c | ||
| holly.c | ||
| install.sh | ||
| io.h | ||
| libfdt-wrapper.c | ||
| libfdt_env.h | ||
| main.c | ||
| mktree.c | ||
| mpc8xx.c | ||
| mpc8xx.h | ||
| mpc52xx-psc.c | ||
| mpsc.c | ||
| mv64x60.c | ||
| mv64x60.h | ||
| mv64x60_i2c.c | ||
| ns16550.c | ||
| of.c | ||
| of.h | ||
| ofconsole.c | ||
| oflib.c | ||
| ops.h | ||
| page.h | ||
| planetcore.c | ||
| planetcore.h | ||
| ppc_asm.h | ||
| ppcboot.h | ||
| pq2.c | ||
| pq2.h | ||
| prpmc2800.c | ||
| ps3-head.S | ||
| ps3-hvcall.S | ||
| ps3.c | ||
| redboot-8xx.c | ||
| redboot.h | ||
| reg.h | ||
| rs6000.h | ||
| serial.c | ||
| simple_alloc.c | ||
| stdio.c | ||
| stdio.h | ||
| stdlib.c | ||
| stdlib.h | ||
| string.S | ||
| string.h | ||
| treeboot-bamboo.c | ||
| treeboot-ebony.c | ||
| treeboot-walnut.c | ||
| types.h | ||
| uartlite.c | ||
| util.S | ||
| wrapper | ||
| zImage.coff.lds.S | ||
| zImage.lds.S | ||
| zImage.ps3.lds.S | ||
README
To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary: objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz objcopy -j .kernel:System.map -O binary zImage System.map.gz objcopy -j .kernel:.config -O binary zImage config.gz objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz Peter