441 lines
12 KiB
C
441 lines
12 KiB
C
/*
|
|
* Atmel AT91 SAM9 & SAMA5 SoCs reset code
|
|
*
|
|
* Copyright (C) 2007 Atmel Corporation.
|
|
* Copyright (C) BitBox Ltd 2010
|
|
* Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com>
|
|
* Copyright (C) 2014 Free Electrons
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/reset-controller.h>
|
|
#include <linux/power/power_on_reason.h>
|
|
|
|
#include <soc/at91/at91sam9_ddrsdr.h>
|
|
#include <soc/at91/at91sam9_sdramc.h>
|
|
|
|
#include <dt-bindings/reset/sama7g5-reset.h>
|
|
|
|
#define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */
|
|
#define AT91_RSTC_PROCRST BIT(0) /* Processor Reset */
|
|
#define AT91_RSTC_PERRST BIT(2) /* Peripheral Reset */
|
|
#define AT91_RSTC_EXTRST BIT(3) /* External Reset */
|
|
#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */
|
|
|
|
#define AT91_RSTC_SR 0x04 /* Reset Controller Status Register */
|
|
#define AT91_RSTC_URSTS BIT(0) /* User Reset Status */
|
|
#define AT91_RSTC_RSTTYP GENMASK(10, 8) /* Reset Type */
|
|
#define AT91_RSTC_NRSTL BIT(16) /* NRST Pin Level */
|
|
#define AT91_RSTC_SRCMP BIT(17) /* Software Reset Command in Progress */
|
|
|
|
#define AT91_RSTC_MR 0x08 /* Reset Controller Mode Register */
|
|
#define AT91_RSTC_URSTEN BIT(0) /* User Reset Enable */
|
|
#define AT91_RSTC_URSTASYNC BIT(2) /* User Reset Asynchronous Control */
|
|
#define AT91_RSTC_URSTIEN BIT(4) /* User Reset Interrupt Enable */
|
|
#define AT91_RSTC_ERSTL GENMASK(11, 8) /* External Reset Length */
|
|
|
|
/**
|
|
* enum reset_type - reset types
|
|
* @RESET_TYPE_GENERAL: first power-up reset
|
|
* @RESET_TYPE_WAKEUP: return from backup mode
|
|
* @RESET_TYPE_WATCHDOG: watchdog fault
|
|
* @RESET_TYPE_SOFTWARE: processor reset required by software
|
|
* @RESET_TYPE_USER: NRST pin detected low
|
|
* @RESET_TYPE_CPU_FAIL: CPU clock failure detection
|
|
* @RESET_TYPE_XTAL_FAIL: 32KHz crystal failure dectection fault
|
|
* @RESET_TYPE_ULP2: ULP2 reset
|
|
*/
|
|
enum reset_type {
|
|
RESET_TYPE_GENERAL = 0,
|
|
RESET_TYPE_WAKEUP = 1,
|
|
RESET_TYPE_WATCHDOG = 2,
|
|
RESET_TYPE_SOFTWARE = 3,
|
|
RESET_TYPE_USER = 4,
|
|
RESET_TYPE_CPU_FAIL = 6,
|
|
RESET_TYPE_XTAL_FAIL = 7,
|
|
RESET_TYPE_ULP2 = 8,
|
|
};
|
|
|
|
/**
|
|
* struct at91_reset - AT91 reset specific data structure
|
|
* @rstc_base: base address for system reset
|
|
* @ramc_base: array with base addresses of RAM controllers
|
|
* @dev_base: base address for devices reset
|
|
* @sclk: slow clock
|
|
* @data: platform specific reset data
|
|
* @rcdev: reset controller device
|
|
* @lock: lock for devices reset register access
|
|
* @nb: reset notifier block
|
|
* @args: SoC specific system reset arguments
|
|
* @ramc_lpr: SDRAM Controller Low Power Register
|
|
*/
|
|
struct at91_reset {
|
|
void __iomem *rstc_base;
|
|
void __iomem *ramc_base[2];
|
|
void __iomem *dev_base;
|
|
struct clk *sclk;
|
|
const struct at91_reset_data *data;
|
|
struct reset_controller_dev rcdev;
|
|
spinlock_t lock;
|
|
struct notifier_block nb;
|
|
u32 args;
|
|
u32 ramc_lpr;
|
|
};
|
|
|
|
#define to_at91_reset(r) container_of(r, struct at91_reset, rcdev)
|
|
|
|
/**
|
|
* struct at91_reset_data - AT91 reset data
|
|
* @reset_args: SoC specific system reset arguments
|
|
* @n_device_reset: number of device resets
|
|
* @device_reset_min_id: min id for device reset
|
|
* @device_reset_max_id: max id for device reset
|
|
*/
|
|
struct at91_reset_data {
|
|
u32 reset_args;
|
|
u32 n_device_reset;
|
|
u8 device_reset_min_id;
|
|
u8 device_reset_max_id;
|
|
};
|
|
|
|
/*
|
|
* unless the SDRAM is cleanly shutdown before we hit the
|
|
* reset register it can be left driving the data bus and
|
|
* killing the chance of a subsequent boot from NAND
|
|
*/
|
|
static int at91_reset(struct notifier_block *this, unsigned long mode,
|
|
void *cmd)
|
|
{
|
|
struct at91_reset *reset = container_of(this, struct at91_reset, nb);
|
|
|
|
asm volatile(
|
|
/* Align to cache lines */
|
|
".balign 32\n\t"
|
|
|
|
/* Disable SDRAM0 accesses */
|
|
" tst %0, #0\n\t"
|
|
" beq 1f\n\t"
|
|
" str %3, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
|
|
/* Power down SDRAM0 */
|
|
" str %4, [%0, %6]\n\t"
|
|
/* Disable SDRAM1 accesses */
|
|
"1: tst %1, #0\n\t"
|
|
" beq 2f\n\t"
|
|
" strne %3, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
|
|
/* Power down SDRAM1 */
|
|
" strne %4, [%1, %6]\n\t"
|
|
/* Reset CPU */
|
|
"2: str %5, [%2, #" __stringify(AT91_RSTC_CR) "]\n\t"
|
|
|
|
" b .\n\t"
|
|
:
|
|
: "r" (reset->ramc_base[0]),
|
|
"r" (reset->ramc_base[1]),
|
|
"r" (reset->rstc_base),
|
|
"r" (1),
|
|
"r" cpu_to_le32(AT91_DDRSDRC_LPCB_POWER_DOWN),
|
|
"r" (reset->data->reset_args),
|
|
"r" (reset->ramc_lpr)
|
|
: "r4");
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static const char *at91_reset_reason(struct at91_reset *reset)
|
|
{
|
|
u32 reg = readl(reset->rstc_base + AT91_RSTC_SR);
|
|
const char *reason;
|
|
|
|
switch ((reg & AT91_RSTC_RSTTYP) >> 8) {
|
|
case RESET_TYPE_GENERAL:
|
|
reason = POWER_ON_REASON_REGULAR;
|
|
break;
|
|
case RESET_TYPE_WAKEUP:
|
|
reason = POWER_ON_REASON_RTC;
|
|
break;
|
|
case RESET_TYPE_WATCHDOG:
|
|
reason = POWER_ON_REASON_WATCHDOG;
|
|
break;
|
|
case RESET_TYPE_SOFTWARE:
|
|
reason = POWER_ON_REASON_SOFTWARE;
|
|
break;
|
|
case RESET_TYPE_USER:
|
|
reason = POWER_ON_REASON_RST_BTN;
|
|
break;
|
|
case RESET_TYPE_CPU_FAIL:
|
|
reason = POWER_ON_REASON_CPU_CLK_FAIL;
|
|
break;
|
|
case RESET_TYPE_XTAL_FAIL:
|
|
reason = POWER_ON_REASON_XTAL_FAIL;
|
|
break;
|
|
case RESET_TYPE_ULP2:
|
|
reason = POWER_ON_REASON_BROWN_OUT;
|
|
break;
|
|
default:
|
|
reason = POWER_ON_REASON_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
return reason;
|
|
}
|
|
|
|
static ssize_t power_on_reason_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct at91_reset *reset = platform_get_drvdata(pdev);
|
|
|
|
return sprintf(buf, "%s\n", at91_reset_reason(reset));
|
|
}
|
|
static DEVICE_ATTR_RO(power_on_reason);
|
|
|
|
static const struct of_device_id at91_ramc_of_match[] = {
|
|
{
|
|
.compatible = "atmel,at91sam9260-sdramc",
|
|
.data = (void *)AT91_SDRAMC_LPR,
|
|
},
|
|
{
|
|
.compatible = "atmel,at91sam9g45-ddramc",
|
|
.data = (void *)AT91_DDRSDRC_LPR,
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static const struct at91_reset_data sam9260 = {
|
|
.reset_args = AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST,
|
|
};
|
|
|
|
static const struct at91_reset_data samx7 = {
|
|
.reset_args = AT91_RSTC_KEY | AT91_RSTC_PROCRST,
|
|
};
|
|
|
|
static const struct at91_reset_data sama7g5 = {
|
|
.reset_args = AT91_RSTC_KEY | AT91_RSTC_PROCRST,
|
|
.n_device_reset = 3,
|
|
.device_reset_min_id = SAMA7G5_RESET_USB_PHY1,
|
|
.device_reset_max_id = SAMA7G5_RESET_USB_PHY3,
|
|
};
|
|
|
|
static const struct of_device_id at91_reset_of_match[] = {
|
|
{
|
|
.compatible = "atmel,at91sam9260-rstc",
|
|
.data = &sam9260,
|
|
},
|
|
{
|
|
.compatible = "atmel,at91sam9g45-rstc",
|
|
.data = &sam9260,
|
|
},
|
|
{
|
|
.compatible = "atmel,sama5d3-rstc",
|
|
.data = &sam9260,
|
|
},
|
|
{
|
|
.compatible = "atmel,samx7-rstc",
|
|
.data = &samx7,
|
|
},
|
|
{
|
|
.compatible = "microchip,sam9x60-rstc",
|
|
.data = &samx7,
|
|
},
|
|
{
|
|
.compatible = "microchip,sama7g5-rstc",
|
|
.data = &sama7g5,
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, at91_reset_of_match);
|
|
|
|
static int at91_reset_update(struct reset_controller_dev *rcdev,
|
|
unsigned long id, bool assert)
|
|
{
|
|
struct at91_reset *reset = to_at91_reset(rcdev);
|
|
unsigned long flags;
|
|
u32 val;
|
|
|
|
spin_lock_irqsave(&reset->lock, flags);
|
|
val = readl_relaxed(reset->dev_base);
|
|
if (assert)
|
|
val |= BIT(id);
|
|
else
|
|
val &= ~BIT(id);
|
|
writel_relaxed(val, reset->dev_base);
|
|
spin_unlock_irqrestore(&reset->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_reset_assert(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
return at91_reset_update(rcdev, id, true);
|
|
}
|
|
|
|
static int at91_reset_deassert(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
return at91_reset_update(rcdev, id, false);
|
|
}
|
|
|
|
static int at91_reset_dev_status(struct reset_controller_dev *rcdev,
|
|
unsigned long id)
|
|
{
|
|
struct at91_reset *reset = to_at91_reset(rcdev);
|
|
u32 val;
|
|
|
|
val = readl_relaxed(reset->dev_base);
|
|
|
|
return !!(val & BIT(id));
|
|
}
|
|
|
|
static const struct reset_control_ops at91_reset_ops = {
|
|
.assert = at91_reset_assert,
|
|
.deassert = at91_reset_deassert,
|
|
.status = at91_reset_dev_status,
|
|
};
|
|
|
|
static int at91_reset_of_xlate(struct reset_controller_dev *rcdev,
|
|
const struct of_phandle_args *reset_spec)
|
|
{
|
|
struct at91_reset *reset = to_at91_reset(rcdev);
|
|
|
|
if (!reset->data->n_device_reset ||
|
|
(reset_spec->args[0] < reset->data->device_reset_min_id ||
|
|
reset_spec->args[0] > reset->data->device_reset_max_id))
|
|
return -EINVAL;
|
|
|
|
return reset_spec->args[0];
|
|
}
|
|
|
|
static int at91_rcdev_init(struct at91_reset *reset,
|
|
struct platform_device *pdev)
|
|
{
|
|
if (!reset->data->n_device_reset)
|
|
return 0;
|
|
|
|
reset->dev_base = devm_of_iomap(&pdev->dev, pdev->dev.of_node, 1,
|
|
NULL);
|
|
if (IS_ERR(reset->dev_base))
|
|
return -ENODEV;
|
|
|
|
spin_lock_init(&reset->lock);
|
|
reset->rcdev.ops = &at91_reset_ops;
|
|
reset->rcdev.owner = THIS_MODULE;
|
|
reset->rcdev.of_node = pdev->dev.of_node;
|
|
reset->rcdev.nr_resets = reset->data->n_device_reset;
|
|
reset->rcdev.of_reset_n_cells = 1;
|
|
reset->rcdev.of_xlate = at91_reset_of_xlate;
|
|
|
|
return devm_reset_controller_register(&pdev->dev, &reset->rcdev);
|
|
}
|
|
|
|
static int at91_reset_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *match;
|
|
struct at91_reset *reset;
|
|
struct device_node *np;
|
|
int ret, idx = 0;
|
|
|
|
reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL);
|
|
if (!reset)
|
|
return -ENOMEM;
|
|
|
|
reset->rstc_base = devm_of_iomap(&pdev->dev, pdev->dev.of_node, 0, NULL);
|
|
if (IS_ERR(reset->rstc_base)) {
|
|
dev_err(&pdev->dev, "Could not map reset controller address\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!of_device_is_compatible(pdev->dev.of_node, "atmel,sama5d3-rstc")) {
|
|
/* we need to shutdown the ddr controller, so get ramc base */
|
|
for_each_matching_node_and_match(np, at91_ramc_of_match, &match) {
|
|
reset->ramc_lpr = (u32)match->data;
|
|
reset->ramc_base[idx] = devm_of_iomap(&pdev->dev, np, 0, NULL);
|
|
if (IS_ERR(reset->ramc_base[idx])) {
|
|
dev_err(&pdev->dev, "Could not map ram controller address\n");
|
|
of_node_put(np);
|
|
return -ENODEV;
|
|
}
|
|
idx++;
|
|
}
|
|
}
|
|
|
|
reset->data = device_get_match_data(&pdev->dev);
|
|
if (!reset->data)
|
|
return -ENODEV;
|
|
|
|
reset->nb.notifier_call = at91_reset;
|
|
reset->nb.priority = 192;
|
|
|
|
reset->sclk = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(reset->sclk))
|
|
return PTR_ERR(reset->sclk);
|
|
|
|
ret = clk_prepare_enable(reset->sclk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Could not enable slow clock\n");
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, reset);
|
|
|
|
ret = at91_rcdev_init(reset, pdev);
|
|
if (ret)
|
|
goto disable_clk;
|
|
|
|
if (of_device_is_compatible(pdev->dev.of_node, "microchip,sam9x60-rstc")) {
|
|
u32 val = readl(reset->rstc_base + AT91_RSTC_MR);
|
|
|
|
writel(AT91_RSTC_KEY | AT91_RSTC_URSTASYNC | val,
|
|
reset->rstc_base + AT91_RSTC_MR);
|
|
}
|
|
|
|
ret = register_restart_handler(&reset->nb);
|
|
if (ret)
|
|
goto disable_clk;
|
|
|
|
ret = device_create_file(&pdev->dev, &dev_attr_power_on_reason);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Could not create sysfs entry\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "Starting after %s\n", at91_reset_reason(reset));
|
|
|
|
return 0;
|
|
|
|
disable_clk:
|
|
clk_disable_unprepare(reset->sclk);
|
|
return ret;
|
|
}
|
|
|
|
static void at91_reset_remove(struct platform_device *pdev)
|
|
{
|
|
struct at91_reset *reset = platform_get_drvdata(pdev);
|
|
|
|
unregister_restart_handler(&reset->nb);
|
|
clk_disable_unprepare(reset->sclk);
|
|
}
|
|
|
|
static struct platform_driver at91_reset_driver = {
|
|
.probe = at91_reset_probe,
|
|
.remove_new = at91_reset_remove,
|
|
.driver = {
|
|
.name = "at91-reset",
|
|
.of_match_table = at91_reset_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(at91_reset_driver);
|
|
|
|
MODULE_AUTHOR("Atmel Corporation");
|
|
MODULE_DESCRIPTION("Reset driver for Atmel SoCs");
|
|
MODULE_LICENSE("GPL v2");
|