490 lines
12 KiB
C
490 lines
12 KiB
C
/*
|
|
* Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
|
|
*
|
|
* May be copied or modified under the terms of the GNU General Public
|
|
* License. See linux/COPYING for more information.
|
|
*
|
|
* Support functions for the ST40 PCI hardware.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/types.h>
|
|
#include <asm/pci.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h> /* irqreturn_t */
|
|
|
|
#include "pci-st40.h"
|
|
|
|
/* This is in P2 of course */
|
|
#define ST40PCI_BASE_ADDRESS (0xb0000000)
|
|
#define ST40PCI_MEM_ADDRESS (ST40PCI_BASE_ADDRESS+0x0)
|
|
#define ST40PCI_IO_ADDRESS (ST40PCI_BASE_ADDRESS+0x06000000)
|
|
#define ST40PCI_REG_ADDRESS (ST40PCI_BASE_ADDRESS+0x07000000)
|
|
|
|
#define ST40PCI_REG(x) (ST40PCI_REG_ADDRESS+(ST40PCI_##x))
|
|
#define ST40PCI_REG_INDEXED(reg, index) \
|
|
(ST40PCI_REG(reg##0) + \
|
|
((ST40PCI_REG(reg##1) - ST40PCI_REG(reg##0))*index))
|
|
|
|
#define ST40PCI_WRITE(reg,val) writel((val),ST40PCI_REG(reg))
|
|
#define ST40PCI_WRITE_SHORT(reg,val) writew((val),ST40PCI_REG(reg))
|
|
#define ST40PCI_WRITE_BYTE(reg,val) writeb((val),ST40PCI_REG(reg))
|
|
#define ST40PCI_WRITE_INDEXED(reg, index, val) \
|
|
writel((val), ST40PCI_REG_INDEXED(reg, index));
|
|
|
|
#define ST40PCI_READ(reg) readl(ST40PCI_REG(reg))
|
|
#define ST40PCI_READ_SHORT(reg) readw(ST40PCI_REG(reg))
|
|
#define ST40PCI_READ_BYTE(reg) readb(ST40PCI_REG(reg))
|
|
|
|
#define ST40PCI_SERR_IRQ 64
|
|
#define ST40PCI_ERR_IRQ 65
|
|
|
|
|
|
/* Macros to extract PLL params */
|
|
#define PLL_MDIV(reg) ( ((unsigned)reg) & 0xff )
|
|
#define PLL_NDIV(reg) ( (((unsigned)reg)>>8) & 0xff )
|
|
#define PLL_PDIV(reg) ( (((unsigned)reg)>>16) & 0x3 )
|
|
#define PLL_SETUP(reg) ( (((unsigned)reg)>>19) & 0x1ff )
|
|
|
|
/* Build up the appropriate settings */
|
|
#define PLL_SET(mdiv,ndiv,pdiv,setup) \
|
|
( ((mdiv)&0xff) | (((ndiv)&0xff)<<8) | (((pdiv)&3)<<16)| (((setup)&0x1ff)<<19))
|
|
|
|
#define PLLPCICR (0xbb040000+0x10)
|
|
|
|
#define PLLPCICR_POWERON (1<<28)
|
|
#define PLLPCICR_OUT_EN (1<<29)
|
|
#define PLLPCICR_LOCKSELECT (1<<30)
|
|
#define PLLPCICR_LOCK (1<<31)
|
|
|
|
|
|
#define PLL_25MHZ 0x793c8512
|
|
#define PLL_33MHZ PLL_SET(18,88,3,295)
|
|
|
|
static void pci_set_rbar_region(unsigned int region, unsigned long localAddr,
|
|
unsigned long pciOffset, unsigned long regionSize);
|
|
|
|
static __init void SetPCIPLL(void)
|
|
{
|
|
{
|
|
/* Lets play with the PLL values */
|
|
unsigned long pll1cr1;
|
|
unsigned long mdiv, ndiv, pdiv;
|
|
unsigned long muxcr;
|
|
unsigned int muxcr_ratios[4] = { 8, 16, 21, 1 };
|
|
unsigned int freq;
|
|
|
|
#define CLKGENA 0xbb040000
|
|
#define CLKGENA_PLL2_MUXCR CLKGENA + 0x48
|
|
pll1cr1 = ctrl_inl(PLLPCICR);
|
|
printk("PLL1CR1 %08lx\n", pll1cr1);
|
|
mdiv = PLL_MDIV(pll1cr1);
|
|
ndiv = PLL_NDIV(pll1cr1);
|
|
pdiv = PLL_PDIV(pll1cr1);
|
|
printk("mdiv %02lx ndiv %02lx pdiv %02lx\n", mdiv, ndiv, pdiv);
|
|
freq = ((2*27*ndiv)/mdiv) / (1 << pdiv);
|
|
printk("PLL freq %dMHz\n", freq);
|
|
muxcr = ctrl_inl(CLKGENA_PLL2_MUXCR);
|
|
printk("PCI freq %dMhz\n", freq / muxcr_ratios[muxcr & 3]);
|
|
}
|
|
}
|
|
|
|
|
|
struct pci_err {
|
|
unsigned mask;
|
|
const char *error_string;
|
|
};
|
|
|
|
static struct pci_err int_error[]={
|
|
{ INT_MNLTDIM,"MNLTDIM: Master non-lock transfer"},
|
|
{ INT_TTADI, "TTADI: Illegal byte enable in I/O transfer"},
|
|
{ INT_TMTO, "TMTO: Target memory read/write timeout"},
|
|
{ INT_MDEI, "MDEI: Master function disable error"},
|
|
{ INT_APEDI, "APEDI: Address parity error"},
|
|
{ INT_SDI, "SDI: SERR detected"},
|
|
{ INT_DPEITW, "DPEITW: Data parity error target write"},
|
|
{ INT_PEDITR, "PEDITR: PERR detected"},
|
|
{ INT_TADIM, "TADIM: Target abort detected"},
|
|
{ INT_MADIM, "MADIM: Master abort detected"},
|
|
{ INT_MWPDI, "MWPDI: PERR from target at data write"},
|
|
{ INT_MRDPEI, "MRDPEI: Master read data parity error"}
|
|
};
|
|
#define NUM_PCI_INT_ERRS (sizeof(int_error)/sizeof(struct pci_err))
|
|
|
|
static struct pci_err aint_error[]={
|
|
{ AINT_MBI, "MBI: Master broken"},
|
|
{ AINT_TBTOI, "TBTOI: Target bus timeout"},
|
|
{ AINT_MBTOI, "MBTOI: Master bus timeout"},
|
|
{ AINT_TAI, "TAI: Target abort"},
|
|
{ AINT_MAI, "MAI: Master abort"},
|
|
{ AINT_RDPEI, "RDPEI: Read data parity"},
|
|
{ AINT_WDPE, "WDPE: Write data parity"}
|
|
};
|
|
|
|
#define NUM_PCI_AINT_ERRS (sizeof(aint_error)/sizeof(struct pci_err))
|
|
|
|
static void print_pci_errors(unsigned reg,struct pci_err *error,int num_errors)
|
|
{
|
|
int i;
|
|
|
|
for(i=0;i<num_errors;i++) {
|
|
if(reg & error[i].mask) {
|
|
printk("%s\n",error[i].error_string);
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
|
|
static char * pci_commands[16]={
|
|
"Int Ack",
|
|
"Special Cycle",
|
|
"I/O Read",
|
|
"I/O Write",
|
|
"Reserved",
|
|
"Reserved",
|
|
"Memory Read",
|
|
"Memory Write",
|
|
"Reserved",
|
|
"Reserved",
|
|
"Configuration Read",
|
|
"Configuration Write",
|
|
"Memory Read Multiple",
|
|
"Dual Address Cycle",
|
|
"Memory Read Line",
|
|
"Memory Write-and-Invalidate"
|
|
};
|
|
|
|
static irqreturn_t st40_pci_irq(int irq, void *dev_instance)
|
|
{
|
|
unsigned pci_int, pci_air, pci_cir, pci_aint;
|
|
static int count=0;
|
|
|
|
|
|
pci_int = ST40PCI_READ(INT);pci_aint = ST40PCI_READ(AINT);
|
|
pci_cir = ST40PCI_READ(CIR);pci_air = ST40PCI_READ(AIR);
|
|
|
|
/* Reset state to stop multiple interrupts */
|
|
ST40PCI_WRITE(INT, ~0); ST40PCI_WRITE(AINT, ~0);
|
|
|
|
|
|
if(++count>1) return IRQ_HANDLED;
|
|
|
|
printk("** PCI ERROR **\n");
|
|
|
|
if(pci_int) {
|
|
printk("** INT register status\n");
|
|
print_pci_errors(pci_int,int_error,NUM_PCI_INT_ERRS);
|
|
}
|
|
|
|
if(pci_aint) {
|
|
printk("** AINT register status\n");
|
|
print_pci_errors(pci_aint,aint_error,NUM_PCI_AINT_ERRS);
|
|
}
|
|
|
|
printk("** Address and command info\n");
|
|
|
|
printk("** Command %s : Address 0x%x\n",
|
|
pci_commands[pci_cir&0xf],pci_air);
|
|
|
|
if(pci_cir&CIR_PIOTEM) {
|
|
printk("CIR_PIOTEM:PIO transfer error for master\n");
|
|
}
|
|
if(pci_cir&CIR_RWTET) {
|
|
printk("CIR_RWTET:Read/Write transfer error for target\n");
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
|
|
/* Rounds a number UP to the nearest power of two. Used for
|
|
* sizing the PCI window.
|
|
*/
|
|
static u32 r2p2(u32 num)
|
|
{
|
|
int i = 31;
|
|
u32 tmp = num;
|
|
|
|
if (num == 0)
|
|
return 0;
|
|
|
|
do {
|
|
if (tmp & (1 << 31))
|
|
break;
|
|
i--;
|
|
tmp <<= 1;
|
|
} while (i >= 0);
|
|
|
|
tmp = 1 << i;
|
|
/* If the original number isn't a power of 2, round it up */
|
|
if (tmp != num)
|
|
tmp <<= 1;
|
|
|
|
return tmp;
|
|
}
|
|
|
|
static void __init pci_fixup_ide_bases(struct pci_dev *d)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* PCI IDE controllers use non-standard I/O port decoding, respect it.
|
|
*/
|
|
if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
|
|
return;
|
|
printk("PCI: IDE base address fixup for %s\n", pci_name(d));
|
|
for(i=0; i<4; i++) {
|
|
struct resource *r = &d->resource[i];
|
|
if ((r->start & ~0x80) == 0x374) {
|
|
r->start |= 2;
|
|
r->end = r->start;
|
|
}
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
|
|
|
|
int __init st40pci_init(unsigned memStart, unsigned memSize)
|
|
{
|
|
u32 lsr0;
|
|
|
|
SetPCIPLL();
|
|
|
|
/* Initialises the ST40 pci subsystem, performing a reset, then programming
|
|
* up the address space decoders appropriately
|
|
*/
|
|
|
|
/* Should reset core here as well methink */
|
|
|
|
ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_SOFT_RESET);
|
|
|
|
/* Loop while core resets */
|
|
while (ST40PCI_READ(CR) & CR_SOFT_RESET);
|
|
|
|
/* Switch off interrupts */
|
|
ST40PCI_WRITE(INTM, 0);
|
|
ST40PCI_WRITE(AINT, 0);
|
|
|
|
/* Now, lets reset all the cards on the bus with extreme prejudice */
|
|
ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_RSTCTL);
|
|
udelay(250);
|
|
|
|
/* Set bus active, take it out of reset */
|
|
ST40PCI_WRITE(CR, CR_LOCK_MASK | CR_BMAM | CR_CFINT | CR_PFCS | CR_PFE);
|
|
|
|
/* The PCI spec says that no access must be made to the bus until 1 second
|
|
* after reset. This seem ludicrously long, but some delay is needed here
|
|
*/
|
|
mdelay(1000);
|
|
|
|
/* Switch off interrupts */
|
|
ST40PCI_WRITE(INTM, 0);
|
|
ST40PCI_WRITE(AINT, 0);
|
|
|
|
/* Allow it to be a master */
|
|
|
|
ST40PCI_WRITE_SHORT(CSR_CMD,
|
|
PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
|
|
PCI_COMMAND_IO);
|
|
|
|
/* Accesse to the 0xb0000000 -> 0xb6000000 area will go through to 0x10000000 -> 0x16000000
|
|
* on the PCI bus. This allows a nice 1-1 bus to phys mapping.
|
|
*/
|
|
|
|
|
|
ST40PCI_WRITE(MBR, 0x10000000);
|
|
/* Always set the max size 128M (actually, it is only 96MB wide) */
|
|
ST40PCI_WRITE(MBMR, 0x07ff0000);
|
|
|
|
/* I/O addresses are mapped at 0xb6000000 -> 0xb7000000. These are changed to 0, to
|
|
* allow cards that have legacy io such as vga to function correctly. This gives a
|
|
* maximum of 64K of io/space as only the bottom 16 bits of the address are copied
|
|
* over to the bus when the transaction is made. 64K of io space is more than enough
|
|
*/
|
|
ST40PCI_WRITE(IOBR, 0x0);
|
|
/* Set up the 64K window */
|
|
ST40PCI_WRITE(IOBMR, 0x0);
|
|
|
|
/* Now we set up the mbars so the PCI bus can see the local memory */
|
|
/* Expose a 256M window starting at PCI address 0... */
|
|
ST40PCI_WRITE(CSR_MBAR0, 0);
|
|
ST40PCI_WRITE(LSR0, 0x0fff0001);
|
|
|
|
/* ... and set up the initial incomming window to expose all of RAM */
|
|
pci_set_rbar_region(7, memStart, memStart, memSize);
|
|
|
|
/* Maximise timeout values */
|
|
ST40PCI_WRITE_BYTE(CSR_TRDY, 0xff);
|
|
ST40PCI_WRITE_BYTE(CSR_RETRY, 0xff);
|
|
ST40PCI_WRITE_BYTE(CSR_MIT, 0xff);
|
|
|
|
ST40PCI_WRITE_BYTE(PERF,PERF_MASTER_WRITE_POSTING);
|
|
|
|
return 1;
|
|
}
|
|
|
|
char * __init pcibios_setup(char *str)
|
|
{
|
|
return str;
|
|
}
|
|
|
|
|
|
#define SET_CONFIG_BITS(bus,devfn,where)\
|
|
(((bus) << 16) | ((devfn) << 8) | ((where) & ~3) | (bus!=0))
|
|
|
|
#define CONFIG_CMD(bus, devfn, where) SET_CONFIG_BITS(bus->number,devfn,where)
|
|
|
|
|
|
static int CheckForMasterAbort(void)
|
|
{
|
|
if (ST40PCI_READ(INT) & INT_MADIM) {
|
|
/* Should we clear config space version as well ??? */
|
|
ST40PCI_WRITE(INT, INT_MADIM);
|
|
ST40PCI_WRITE_SHORT(CSR_STATUS, 0);
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Write to config register */
|
|
static int st40pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val)
|
|
{
|
|
ST40PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
|
|
switch (size) {
|
|
case 1:
|
|
*val = (u8)ST40PCI_READ_BYTE(PDR + (where & 3));
|
|
break;
|
|
case 2:
|
|
*val = (u16)ST40PCI_READ_SHORT(PDR + (where & 2));
|
|
break;
|
|
case 4:
|
|
*val = ST40PCI_READ(PDR);
|
|
break;
|
|
}
|
|
|
|
if (CheckForMasterAbort()){
|
|
switch (size) {
|
|
case 1:
|
|
*val = (u8)0xff;
|
|
break;
|
|
case 2:
|
|
*val = (u16)0xffff;
|
|
break;
|
|
case 4:
|
|
*val = 0xffffffff;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int st40pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
|
|
{
|
|
ST40PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
|
|
|
|
switch (size) {
|
|
case 1:
|
|
ST40PCI_WRITE_BYTE(PDR + (where & 3), (u8)val);
|
|
break;
|
|
case 2:
|
|
ST40PCI_WRITE_SHORT(PDR + (where & 2), (u16)val);
|
|
break;
|
|
case 4:
|
|
ST40PCI_WRITE(PDR, val);
|
|
break;
|
|
}
|
|
|
|
CheckForMasterAbort();
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
struct pci_ops st40pci_config_ops = {
|
|
.read = st40pci_read,
|
|
.write = st40pci_write,
|
|
};
|
|
|
|
|
|
/* Everything hangs off this */
|
|
static struct pci_bus *pci_root_bus;
|
|
|
|
static int __init pcibios_init(void)
|
|
{
|
|
extern unsigned long memory_start, memory_end;
|
|
|
|
printk(KERN_ALERT "pci-st40.c: pcibios_init\n");
|
|
|
|
if (sh_mv.mv_init_pci != NULL) {
|
|
sh_mv.mv_init_pci();
|
|
}
|
|
|
|
/* The pci subsytem needs to know where memory is and how much
|
|
* of it there is. I've simply made these globals. A better mechanism
|
|
* is probably needed.
|
|
*/
|
|
st40pci_init(PHYSADDR(memory_start),
|
|
PHYSADDR(memory_end) - PHYSADDR(memory_start));
|
|
|
|
if (request_irq(ST40PCI_ERR_IRQ, st40_pci_irq,
|
|
IRQF_DISABLED, "st40pci", NULL)) {
|
|
printk(KERN_ERR "st40pci: Cannot hook interrupt\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/* Enable the PCI interrupts on the device */
|
|
ST40PCI_WRITE(INTM, ~0);
|
|
ST40PCI_WRITE(AINT, ~0);
|
|
|
|
/* Map the io address apprioately */
|
|
#ifdef CONFIG_HD64465
|
|
hd64465_port_map(PCIBIOS_MIN_IO, (64 * 1024) - PCIBIOS_MIN_IO + 1,
|
|
ST40_IO_ADDR + PCIBIOS_MIN_IO, 0);
|
|
#endif
|
|
|
|
/* ok, do the scan man */
|
|
pci_root_bus = pci_scan_bus(0, &st40pci_config_ops, NULL);
|
|
pci_assign_unassigned_resources();
|
|
|
|
return 0;
|
|
}
|
|
subsys_initcall(pcibios_init);
|
|
|
|
/*
|
|
* Publish a region of local address space over the PCI bus
|
|
* to other devices.
|
|
*/
|
|
static void pci_set_rbar_region(unsigned int region, unsigned long localAddr,
|
|
unsigned long pciOffset, unsigned long regionSize)
|
|
{
|
|
unsigned long mask;
|
|
|
|
if (region > 7)
|
|
return;
|
|
|
|
if (regionSize > (512 * 1024 * 1024))
|
|
return;
|
|
|
|
mask = r2p2(regionSize) - 0x10000;
|
|
|
|
/* Diable the region (in case currently in use, should never happen) */
|
|
ST40PCI_WRITE_INDEXED(RSR, region, 0);
|
|
|
|
/* Start of local address space to publish */
|
|
ST40PCI_WRITE_INDEXED(RLAR, region, PHYSADDR(localAddr) );
|
|
|
|
/* Start of region in PCI address space as an offset from MBAR0 */
|
|
ST40PCI_WRITE_INDEXED(RBAR, region, pciOffset);
|
|
|
|
/* Size of region */
|
|
ST40PCI_WRITE_INDEXED(RSR, region, mask | 1);
|
|
}
|
|
|