We don't want to submit buffer_new blocks for read i/o. This actually won't
happen right now because those requests during an allocating write are all nicely
aligned. It's probably a good idea to provide an explicit check though.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2_mkwrite() will want this so that it can add some mmap specific checks
before asking for a write.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Use some ideas from the new-aops patch series and turn
ocfs2_buffered_write_cluster() into a 2 stage operation with the caller
copying data in between. The code now understands multiple cluster writes as
a result of having to deal with a full page write for greater than 4k pages.
This sets us up to easily call into the write path during ->page_mkwrite().
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Use of the alloc sem during truncate was too narrow - we want to protect
the i_size change and page truncation against mmap now.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2 will attempt to assign the node the slot# provided in the mount
option. Failure to assign the preferred slot is not an error. This small
feature can be useful for automated testing.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Replacing memset(<addr>,0,PAGE_SIZE) with clear_page() in
fs/ocfs2/dlm/dlmrecovery.c
Signed-off-by: Shani Moideen <shani.moideen@wipro.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Tell o2cb_region_dev_write() to wake up if rmdir(2) happens on the
heartbeat region while it is starting up. Then o2hb_region_dev_write()
can check to see if it is alive and act accordingly. This prevents a hang
(not being woken) and a crash (if it's woken by a signal).
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Removing the local node configuration out from underneath a running
heartbeat is "bad". Provide an API in the ocfs2 nodemanager to request
a configfs dependancy on the local node, then use it in heartbeat.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2 mounts require a heartbeat region. Use the new configfs_depend_item()
facility to actually depend on them so they can't go away from under us.
First, teach cluster/nodemanager.c to depend an item on the o2cb subsystem.
Then teach o2hb_register_callbacks to take a UUID and depend on the
appropriate region. Finally, teach all users of o2hb to pass a UUID or
NULL if they don't require a pin.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Sometimes other drivers depend on particular configfs items. For
example, ocfs2 mounts depend on a heartbeat region item. If that
region item is removed with rmdir(2), the ocfs2 mount must BUG or go
readonly. Not happy.
This provides two additional API calls: configfs_depend_item() and
configfs_undepend_item(). A client driver can call
configfs_depend_item() on an existing item to tell configfs that it is
depended on. configfs will then return -EBUSY from rmdir(2) for that
item. When the item is no longer depended on, the client driver calls
configfs_undepend_item() on it.
These API cannot be called underneath any configfs callbacks, as
they will conflict. They can block and allocate. A client driver
probably shouldn't calling them of its own gumption. Rather it should
be providing an API that external subsystems call.
How does this work? Imagine the ocfs2 mount process. When it mounts,
it asks for a heart region item. This is done via a call into the
heartbeat code. Inside the heartbeat code, the region item is looked
up. Here, the heartbeat code calls configfs_depend_item(). If it
succeeds, then heartbeat knows the region is safe to give to ocfs2.
If it fails, it was being torn down anyway, and heartbeat can gracefully
pass up an error.
[ Fixed some bad whitespace in configfs.txt. --Mark ]
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Add a notification callback, ops->disconnect_notify(). It has the same
prototype as ->drop_item(), but it will be called just before the item
linkage is broken. This way, configfs users who want to do work while
the object is still in the heirarchy have a chance.
Client drivers will still need to config_item_put() in their
->drop_item(), if they implement it. They need do nothing in
->disconnect_notify(). They don't have to provide it if they don't
care. But someone who wants to be notified before ci_parent is set to
NULL can now be notified.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Seems copied from sysfs, but I don't see a reason here nor there to use
a semaphore instead of a mutex. Convert.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Convert the su_sem member of struct configfs_subsystem to a struct
mutex, as that's what it is. Also convert all the users and update
Documentation/configfs.txt and Documentation/configfs_example.c
accordingly.
[ Conflict in fs/dlm/config.c with commit
3168b0780d manually resolved. --Mark ]
Inspired-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Configfs being based upon sysfs code, config_group_find_obj() is probably
so named because of the similar kset_find_obj() in sysfs. However,
"kobject"s in sysfs become "config_item"s in configfs, so let's call it
config_group_find_item() instead, for sake of uniformity, and make
corresponding change in the users of this function.
BTW a crucial difference between kset_find_obj and config_group_find_item
is in locking expectations. kset_find_obj does its locking by itself, but
config_group_find_item expects the *caller* to do the locking. The reason
for this: kset's have their own locks, config_group's don't but instead
rely on the subsystem mutex. And, subsystem needn't necessarily be around
when config_group_find_item() is called.
So let's state these locking semantics explicitly, and rectify the comment,
otherwise bugs could continue to occur in future, as they did in the past
(refer commit d82b8191e238 in gfs2-2.6-fixes.git).
[ I also took the opportunity to fix some bad whitespace and
double-empty lines. --Joel ]
[ Conflict in fs/dlm/config.c with commit
3168b0780d manually resolved. --Mark ]
Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Cc: David Teigland <teigland@redhat.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
fs/dlm/config.c contains a useful generic macro called __CONFIGFS_ATTR
that is similar to sysfs' __ATTR macro that makes defining attributes
easy for any user of configfs. Separate it out into configfs.h so that
other users (forthcoming in dynamic netconsole patchset) can use it too.
Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Cc: David Teigland <teigland@redhat.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
1. item.c:config_item_cleanup() is a private function (only called by
config_item_release() in same file). However, it is spuriously
exported in include/linux/configfs.h, so remove that export and make
it static in item.c. Also, it is no longer exported / interface
function, so no need to give comment for this function (the comment
was stating obvious thing, anyway).
2. Kernel-doc comment format does not allow empty line between end of
comment and start of function (declaration line). There were several
such spurious empty lines in item.c, so fix them.
fs/configfs/item.c | 15 +++------------
include/linux/configfs.h | 1 -
2 files changed, 3 insertions(+), 13 deletions(-)
Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
The attribute store/show code currently limits attributes at PAGE_SIZE.
This code comes from sysfs, where it still works that way.
However, PAGE_SIZE is not constant. A 16k attribute string works on
ia64 but not on x86. Really a subsystem shouldn't allow different
attribute sizes based on platform.
As such, limit all simple attributes to 4k. This works on all
platforms, and is consistent with all current code.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
mmc: at91_mci: fix hanging and rework to match flowcharts
mmc: at91_mci typo
sdhci: Fix "Unexpected interrupt" handling
mmc: fix silly copy-and-paste error
mmc: move layer init and workqueue to core file
mmc: refactor host class handling
mmc: refactor bus operations
sdhci: add ene controller id
mmc: bounce requests for simple hosts
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits)
bonding/bond_main.c: make 2 functions static
ps3: gigabit ethernet driver for PS3, take3
[netdrvr] Fix dependencies for ax88796 ne2k clone driver
eHEA: Capability flag for DLPAR support
Remove sk98lin ethernet driver.
sunhme.c:quattro_pci_find() must be __devinit
bonding / ipv6: no addrconf for slaves separately from master
atl1: remove write-only var in tx handler
macmace: use "unsigned long flags;"
Cleanup usbnet_probe() return value handling
netxen: deinline and sparse fix
eeprom_93cx6: shorten pulse timing to match spec (bis)
phylib: Add Marvell 88E1112 phy id
phylib: cleanup marvell.c a bit
AX88796 network driver
IOC3: Switch to pci refcounting safe APIs
e100: Fix Tyan motherboard e100 not receiving IPMI commands
QE Ethernet driver writes to wrong register to mask interrupts
rrunner.c:rr_init() must be __devinit
tokenring/3c359.c:xl_init() must be __devinit
...
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (32 commits)
[libata] sata_mv: print out additional chip info during probe
[libata] Use ATA_UDMAx standard masks when filling driver's udma_mask info
[libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145)
[libata] Clean up driver udma_mask initializers
libata: Support chips with 64K PRD quirk
Add a PCI ID for santa rosa's PATA controller.
sata_sil24: sil24_interrupt() micro-optimisation
Add irq_flags to struct pata_platform_info
sata_promise: cleanups
[libata] pata_ixp4xx: kill unused var
ata_piix: fix pio/mwdma programming
[libata] ahci: minor internal cleanups
[ATA] Add named constant for ATAPI command DEVICE RESET
[libata] sata_sx4, sata_via: minor documentation updates
[libata] ahci: minor internal cleanups
[libata] ahci: Factor out SATA port init into a separate function
[libata] pata_sil680: minor cleanups from benh
[libata] sata_sx4: named constant cleanup
[libata] pata_ixp4xx: convert to new EH
[libata] pdc_adma: Reorder initializers with a couple structs
...
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
[S390] vmlogrdr function annotation.
[S390] s390: rename CPU_IDLE to S390_CPU_IDLE
[S390] cio: Remove prototype for non-existing function cmf_reset().
[S390] zcrypt: fix request timeout handling
[S390] system call optimization.
[S390] dasd: Avoid compile warnings on !CONFIG_DASD_PROFILE
[S390] Remove volatile from atomic_t
[S390] Program check in diag 210 under 31 bit
[S390] Bogomips calculation for 64 bit.
[S390] smp: Merge smp_count_cpus() and smp_get_save_areas().
[S390] zcore: Fix __user annotation.
[S390] fixed cdl-format detection.
[S390] sclp: Test facility list before executing a service call.
[S390] sclp: introduce some new interfaces.
[S390] Fixed comment typo.
[S390] vmcp cleanup
* 'splice-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block:
pipe: add documentation and comments
pipe: change the ->pin() operation to ->confirm()
Remove remnants of sendfile()
xip sendfile removal
splice: completely document external interface with kerneldoc
sendfile: remove bad_sendfile() from bad_file_ops
shmem: convert to using splice instead of sendfile()
relay: use splice_to_pipe() instead of open-coding the pipe loop
pipe: allow passing around of ops private pointer
splice: divorce the splice structure/function definitions from the pipe header
splice: relay support
sendfile: convert nfsd to splice_direct_to_actor()
sendfile: convert nfs to using splice_read()
loop: convert to using splice_direct_to_actor() instead of sendfile()
splice: add void cookie to the actor data
sendfile: kill generic_file_sendfile()
sendfile: remove .sendfile from filesystems that use generic_file_sendfile()
sys_sendfile: switch to using ->splice_read, if available
vmsplice: add vmsplice-to-user support
splice: abstract out actor data
* 'trivial-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block:
Documentation/block/barrier.txt is not in sync with the actual code: - blk_queue_ordered() no longer has a gfp_mask parameter - blk_queue_ordered_locked() no longer exists - sd_prepare_flush() looks slightly different
Use list_for_each_entry() instead of list_for_each() in the block device
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
block/Kconfig already has its own "menuconfig" so remove these
Use menuconfigs instead of menus, so the whole menu can be disabled at once
cfq-iosched: fix async queue behaviour
unexport bio_{,un}map_user
Remove legacy CDROM drivers
[PATCH] fix request->cmd == INT cases
cciss: add new controller support for P700m
[PATCH] Remove acsi.c
[BLOCK] drop unnecessary bvec rewinding from flush_dry_bio_endio
[PATCH] cdrom_sysctl_info fix
blk_hw_contig_segment(): bad segment size checks
[TRIVIAL PATCH] Kill blk_congestion_wait() stub for !CONFIG_BLOCK
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Chad Tindel <ctindel@users.sourceforge.net>
Cc: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Hi,
This is the third submission of the network driver for PS3.
The differences from the previous one are:
- renamed source file names so that their prefix can match
with the module name
- added cbe-oss-dev@ozlabs.org line for MAINTAINER file
- changed some in copyright comments
If there are no more comments, please apply for 2.6.23.
Thank you
--
Subject: PS3: Ethernet driver
From: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Add Gigabit Ethernet support for the PS3 game console. The module will
be called ps3_gelic.
CC: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This patch introduces a capability flag that is used by the DLPAR userspace
tool to check which DLPAR features are supported by the eHEA driver.
Missing goto has been included.
Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
At present, when a device is enslaved to bonding, if ipv6 is
active then addrconf will be initated on the slave (because it is closed
then opened during the enslavement processing). This causes DAD and RS
packets to be sent from the slave. These packets in turn can confuse
switches that perform ipv6 snooping, causing them to incorrectly update
their forwarding tables (if, e.g., the slave being added is an inactve
backup that won't be used right away) and direct traffic away from the
active slave to a backup slave (where the incoming packets will be
dropped).
This patch alters the behavior so that addrconf will only run on
the master device itself. I believe this is logically correct, as it
prevents slaves from having an IPv6 identity independent from the
master. This is consistent with the IPv4 behavior for bonding.
This is accomplished by (a) having bonding set IFF_SLAVE sooner
in the enslavement processing than currently occurs (before open, not
after), and (b) having ipv6 addrconf ignore UP and CHANGE events on
slave devices.
The eql driver also uses the IFF_SLAVE flag. I inspected eql,
and I believe this change is reasonable for its usage of IFF_SLAVE, but
I did not test it.
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
usbnet_probe() handles a positive return value from the driver bind()
function as success, but will later only setup the status handler if the
return value was zero, leading to confusion. Patch adjusts this to accept
positive values as success in both checks.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Get rid of dubious casts to (void *) which causes a sparse warning.
And move largeish function from inline to the one file that uses the code,
the compiler can then decide to inline it.
Compile tested only.
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Based on an original idea by John W. Linville.
It is the missing part of 42d45ccd60636c28e35c2016f091783bc14ad99c
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Add 88E1112 PHY ID to the marvell driver. Seems to do fine with the
88E1111 inits.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Simplify the marvell driver init a bit: Make the supported devices an
array instead of explicitly registering each structure. This makes it
considerably easier to add new devices down the road.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Support for the Asix AX88796 network controller, an
NE2000 compatible 10/100 ethernet device with internal
PHY.
The driver supports PHY settings via either ioctl() or
the ethtool driver ops.
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Here's a slightly cleaner way of creating the /proc structure for the
pnx8850. mostly, it creates a directory with default mode 555, since the
one you're creating is mode 444, which is somewhat unusual for a directory
under /proc.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Using another systems defines is a safe way to get your code broken by
accident when that system is removed.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch is an workaround for these sparse warnings:
linux/include/linux/calc64.h:25:17: warning: symbol '__quot' shadows an earlier one
linux/include/linux/calc64.h:25:17: originally declared here
linux/include/linux/calc64.h:25:17: warning: symbol '__mod' shadows an earlier one
linux/include/linux/calc64.h:25:17: originally declared here
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Mark Fasheh
Sunil Mushran
Shani Moideen
Christoph Hellwig
Joel Becker
Johannes Berg
Satyam Sharma
Linus Torvalds
Adrian Bunk
Masakazu Mokuno
Jeff Garzik
Jan-Bernd Themann
Jay Vosburgh
Alexey Dobriyan
Peter Korsgaard
Stephen Hemminger
Francois Romieu
Olof Johansson
Ben Dooks
Robert P. J. Day
Ralf Baechle
Atsushi Nemoto