Appologies, somehow I seem to have sent an out dated version of this
patch. Here is an additional patch that brings the patch up to date.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For direct and offset type mounts that are covered by another mount we
cannot check the AUTOFS_INF_EXPIRING flag during a path walk which leads
to lookups walking into an expiring mount while it is being expired.
For example, for the direct multi-mount map entry with a couple of
offsets:
/race/mm1 / <server1>:/<path1>
/om1 <server2>:/<path2>
/om2 <server1>:/<path3>
an autofs trigger mount is mounted on /race/mm1 and when accessed it is
over mounted and trigger mounts made for /race/mm1/om1 and /race/mm1/om2.
So it isn't possible for path walks to see the expiring flag at all and
they happily walk into the file system while it is expiring.
When expiring these mounts follow_down() must stop at the autofs mount and
all processes must block in the ->follow_link() method (except the daemon)
until the expire is complete. This is done by decrementing the d_mounted
field of the autofs trigger mount root dentry until the expire is
completed. In ->follow_link() all processes wait on the expire and the
mount following is completed for the daemon until the expire is complete.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The selection of a dentry for expiration and the setting of the
AUTOFS_INF_EXPIRING flag isn't done atomically which can lead to lookups
walking into an expiring mount.
What happens is that an expire is initiated by the daemon and a dentry is
selected for expire but, since there is no lock held between the selection
and setting of the expiring flag, a process may find the flag clear and
continue walking into the mount tree at the same time the daemon attempts
the expire it.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are two cases for which a dentry that has a pending mount request
does not wait for completion. One is via autofs4_revalidate() and the
other via autofs4_follow_link().
In revalidate, after the mount point directory is created, but before the
mount is done, the check in try_to_fill_dentry() can can fail to send the
dentry to the wait queue since the dentry is positive and the lookup flags
may contain only LOOKUP_FOLLOW. Although we don't trigger a mount for the
LOOKUP_FOLLOW flag, if ther's one pending we might as well wait and use
the mounted dentry for the lookup.
In autofs4_follow_link() the dentry is not checked to see if it is pending
so it may fail to call try_to_fill_dentry() and not wait for mount
completion.
A dentry that is pending must always be sent to the wait queue.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The mount triggering functionality of readdir and related functions is no
longer used (and is quite broken as well). The unused portions have been
removed.
Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have been seeing mount requests comming to the automount daemon for
keys of the form "<map key>/<non key directory>" which are lookups for
invalid map keys. But we can check for this in the kernel module and
return a fail immediately, without having to send a request to the daemon.
It is possible to recognise these requests are invalid based on whether
the request dentry is negative and its relation to the autofs file system
root.
For example, given the indirect multi-mount map entry:
idm1 \
/mm1 <server>:/<path1>
/mm2 <server>:/<path2>
For a request to mount idm1, IS_ROOT((idm1)->d_parent) will be always be
true and the dentry may be negative. But directories idm1/mm1 and
idm1/mm2 will always be created as part of the mount request for idm1. So
any mount request within idm1 itself must have a positive dentry otherwise
the map key is invalid.
In version 4 these multi-mount entries are all mounted and umounted as a
single request and in version 5 the directories idm1/mm1 and idm1/mm2 are
created and an autofs fs mounted on them to act as a mount trigger so the
above is also true.
This also holds true for the autofs version 4 pseudo direct mount feature.
When this feature is used without the "--ghost" option automount(8) will
create internal submounts as we go down the map key paths which are
essentially normal indirect mounts for which the above holds. If the
"--ghost" option is given the directories for map keys are created at
daemon startup so valid map entries correspond to postive dentries in the
autofs fs.
autofs version 5 direct mount maps are similar except that the IS_ROOT
check is not needed. This has been addressed in a previous patch tittled
"autofs4 - detect invalid direct mount requests".
For example, given the direct multi-mount map entry:
/test/dm1 \
/mm1 <server>:/<path1>
/mm2 <server>:/<path2>
An autofs fs is mounted on /test/dm1 as a trigger mount and when a mount
is triggered for /test/dm1, the multi-mount offset directories
/test/dm1/mm1 and /test/dm1/mm2 are created and an autofs fs is mounted on
them to act as mount triggers. So valid direct mount requests must always
have a positive dentry if they correspond to a valid map entry.
Signed-off-by: Ian Kent <raven@themaw.net>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
autofs v5 direct and offset mounts within an autofs filesystem are
triggered by existing autofs triger mounts so the mount point dentry must
be positive. If the mount point dentry is negative then the trigger
doesn't exist so we can return fail immediately.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If an autofs mount becomes catatonic before autofs4_wait_release() is
called the wait queue counter will not be decremented down to zero and the
entry will never be freed. There are also races decrementing the wait
counter in the wait release function. To deal with this the counter needs
to be updated while holding the wait queue mutex and waiters need to be
woken up unconditionally when the wait is removed from the queue to ensure
we eventually free the wait.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is possible for an autofs mount to become catatonic (and for the daemon
communication pipe to become NULL) after a wait has been initiallized but
before the request has been sent to the daemon. We need to check for this
before sending the request packet.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It see that the patch tittled "autofs4 - fix pending mount race" is
missing a change that I had recently made.
It's missing a kfree for the case mutex_lock_interruptible() fails
to aquire the wait queue mutex.
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Close a race between a pending mount that is about to finish and a new
lookup for the same directory.
Process P1 triggers a mount of directory foo. It sets
DCACHE_AUTOFS_PENDING in the ->lookup routine, creates a waitq entry for
'foo', and calls out to the daemon to perform the mount. The autofs
daemon will then create the directory 'foo', using a new dentry that will
be hashed in the dcache.
Before the mount completes, another process, P2, tries to walk into the
'foo' directory. The vfs path walking code finds an entry for 'foo' and
calls the revalidate method. Revalidate finds that the entry is not
PENDING (because PENDING was never set on the dentry created by the
mkdir), but it does find the directory is empty. Revalidate calls
try_to_fill_dentry, which sets the PENDING flag and then calls into the
autofs4 wait code to trigger or wait for a mount of 'foo'. The wait code
finds the entry for 'foo' and goes to sleep waiting for the completion of
the mount.
Yet another process, P3, tries to walk into the 'foo' directory. This
process again finds a dentry in the dcache for 'foo', and calls into the
autofs revalidate code.
The revalidate code finds that the PENDING flag is set, and so calls
try_to_fill_dentry.
a) try_to_fill_dentry sets the PENDING flag redundantly for this
dentry, then calls into the autofs4 wait code.
b) the autofs4 wait code takes the waitq mutex and searches for an
entry for 'foo'
Between a and b, P1 is woken up because the mount completed. P1 takes the
wait queue mutex, clears the PENDING flag from the dentry, and removes the
waitqueue entry for 'foo' from the list.
When it releases the waitq mutex, P3 (eventually) acquires it. At this
time, it looks for an existing waitq for 'foo', finds none, and so creates
a new one and calls out to the daemon to mount the 'foo' directory.
Now, the reason that three processes are required to trigger this race is
that, because the PENDING flag is not set on the dentry created by mkdir,
the window for the race would be way to slim for it to ever occur.
Basically, between the testing of d_mountpoint(dentry) and the taking of
the waitq mutex, the mount would have to complete and the daemon would
have to be woken up, and that in turn would have to wake up P1. This is
simply impossible. Add the third process, though, and it becomes slightly
more likely.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The autofs4_catatonic_mode() function accesses the wait queue without any
locking but can be called at any time. This could lead to a possible
double free of the name field of the wait and a double fput of the daemon
communication pipe or an fput of a NULL file pointer.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The autofs_wait_queue already contains all of the fields of the
struct qstr, so change it into a qstr.
This patch, from Jeff Moyer, has been modified a liitle by myself.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When an open(2) call is made on an autofs mount point directory that
already exists and the O_DIRECTORY flag is not used the needed mount
callback to the daemon is not done. This leads to the path walk
continuing resulting in a callback to the daemon with an incorrect
key. open(2) is called without O_DIRECTORY by the "find" utility but
this should be handled properly anyway.
This happens because autofs needs to use the lookup flags to decide
when to callback to the daemon to perform a mount to prevent mount
storms. For example, an autofs indirect mount map that has the "browse"
option will have the mount point directories are pre-created and the
stat(2) call made by a color ls against each directory will cause all
these directories to be mounted. It is unfortunate we need to resort
to this but mount maps can be quite large. Additionally, if a user
manually umounts an autofs indirect mount the directory isn't removed
which also leads to this situation.
To resolve this autofs needs to use the lookup intent flags to enable
it to make this decision. This patch adds this check and triggers a
call back if any of the lookup intent flags are set as all these calls
warrant a mount attempt be requested.
I know that external VFS code which uses the lookup flags is something
that the VFS would like to eliminate but I have no choice as I can't
see any other way to do this. A VFS dentry or inode operation callback
which returns the lookup "type" (requires a definition) would be
sufficient. But this change is needed now and I'm not aware of the form
that coming VFS changes will take so I'm not willing to propose anything
along these lines.
If anyone can provide an alternate method I would be happy to use it.
[akpm@linux-foundation.org: fix build for concurrent VFS changes]
Signed-off-by: Ian Kent <raven@themaw.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since we now delay hashing of dentrys until the ->mkdir() call, droping
and re-taking the directory mutex within the ->lookup() function when we
are being called by user space is not needed. This can lead to a race
when other processes are attempting to access the same directory during
mount point directory creation.
In this case we need to hang onto the mutex to ensure we don't get user
processes trying to create a mount request for a newly created dentry
after the mount point entry has already been created. This ensures that
when we need to check a dentry passed to autofs4_wait(), if it is hashed,
it is always the mount point dentry and not a new dentry created by
another lookup during directory creation.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The length of the symlink name has been moved but it needs to be set
before allocating space for it in the dentry info struct. This corrects a
mistake in a recent patch.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A while ago a patch to resolve a deadlock during directory creation was
merged. This delayed the hashing of lookup dentrys until the ->mkdir()
(or ->symlink()) operation completed to ensure we always went through
->lookup() instead of also having processes go through ->revalidate() so
our VFS locking remained consistent.
Now we are seeing a couple of side affects of that change in situations
with heavy mount activity.
Two cases have been identified:
1) When a mount request is triggered, due to the delayed hashing, the
directory created by user space for the mount point doesn't have the
DCACHE_AUTOFS_PENDING flag set. In the case of an autofs multi-mount
where a tree of mount point directories are created this can lead to
the path walk continuing rather than the dentry being sent to the wait
queue to wait for request completion. This is because, if the pending
flag isn't set, the criteria for deciding this is a mount in progress
fails to hold, namely that the dentry is not a mount point and has no
subdirectories.
2) A mount request dentry is initially created negative and unhashed.
It remains this way until the ->mkdir() callback completes. Since it
is unhashed a fresh dentry is used when the user space mount request
creates the mount point directory. This leaves the original dentry
negative and unhashed. But revalidate has no way to tell the VFS that
the dentry has changed, other than to force another ->lookup() by
returning false, which is at best wastefull and at worst not possible.
This results in an -ENOENT return from the original path walk when in
fact the mount succeeded.
To resolve this we need to ensure that the same dentry is used in all
calls to ->lookup() during the course of a mount request. This patch
achieves that by adding the initial dentry to a look aside list and
removes it at ->mkdir() or ->symlink() completion (or when the dentry is
released), since these are the only create operations autofs4 supports.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch series enables the use of a single dentry for lookups prior to
the dentry being hashed and so we no longer need to redo the lookup. This
patch reverts the patch of commit
033790449b.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Correct the error of making a positive dentry negative after it has been
instantiated.
The code that makes this error attempts to re-use the dentry from a
concurrent expire and mount to resolve a race and the dentry used for the
lookup must be negative for mounts to trigger in the required cases. The
fact is that the dentry doesn't need to be re-used because all that is
needed is to preserve the flag that indicates an expire is still
incomplete at the time of the mount request.
This change uses the the dentry to check the flag and wait for the expire
to complete then discards it instead of attempting to re-use it.
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no good reason to immediately open the lower file, and that can
cause problems with files that the user does not intend to immediately
open, such as device nodes.
This patch removes the persistent file open from the interpose step and
pushes that to the locations where eCryptfs really does need the lower
persistent file, such as just before reading or writing the metadata
stored in the lower file header.
Two functions are jumping to out_dput when they should just be jumping to
out on error paths. This patch also fixes these.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When creating device nodes, eCryptfs needs to delay actually opening the lower
persistent file until an application tries to open. Device handles may not be
backed by anything when they first come into existence.
[Valdis.Kletnieks@vt.edu: build fix]
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: <Valdis.Kletnieks@vt.edu}
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes the following sparse warnings:
fs/ecryptfs/crypto.c:1036:8: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1038:8: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1077:10: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1103:6: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1105:6: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1124:8: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1241:21: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1244:30: warning: incorrect type in assignment (different base types)
fs/ecryptfs/crypto.c:1414:23: warning: cast to restricted __be32
fs/ecryptfs/crypto.c:1417:32: warning: cast to restricted __be16
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clean up overcomplicated string copy, which also gets rid of this
bogus warning:
fs/ecryptfs/main.c: In function 'ecryptfs_parse_options':
include/asm/arch/string_32.h:75: warning: array subscript is above array bounds
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mounting with invalid key signatures should probably fail, if they were
specifically requested but not available.
Also fix case checks in process_request_key_err() for the right sign of
the errnos, as spotted by Jan Tluka.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Jan Tluka <jtluka@redhat.com>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The userspace eCryptfs daemon sends HELO and QUIT messages to the kernel
for per-user daemon (un)registration. These messages are required when
netlink is used as the transport, but (un)registration is handled by
opening and closing the device file when miscdev is the transport. These
messages should be discarded in the miscdev transport so that a daemon
isn't registered twice.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
eCryptfs would really like to have read-write access to all files in the
lower filesystem. Right now, the persistent lower file may be opened
read-only if the attempt to open it read-write fails. One way to keep
from having to do that is to have a privileged kthread that can open the
lower persistent file on behalf of the user opening the eCryptfs file;
this patch implements this functionality.
This patch will properly allow a less-privileged user to open the eCryptfs
file, followed by a more-privileged user opening the eCryptfs file, with
the first user only being able to read and the second user being able to
both read and write. eCryptfs currently does this wrong; it will wind up
calling vfs_write() on a file that was opened read-only. This is fixed in
this patch.
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Compile warning:
ignoring return value of `sysfs_create_link', declared with attribute warn_unused_result.
If sysfs_create_link failed, take care of the return value and do some
error handle after the failure.
Since sysfs_remove_link() will check whether a link exists, when removing the
link in error path, we don't need to care whether a link was created.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
vt.c DO_UPDATE macro checks if the console is visible but doesn't check if
the console is blanked.
In fact updating fbcon while the console is blanked is not only
unnecessary but can even cause screen corruption.
Therefore I am adding a simple check on console_blanked in DO_UPDATE.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hold console sem while creating/destroying sysfs files. Serialisation is
so far done by BKL held in tty release_dev and chrdev_open, but no other
locks are held in open path.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Aristeu Rozanski <aris@ruivo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Improve PIO transfer mode of au1550 spi controller by continuing of spi
transfer, instead of aborting transfer when transmit underflow interrupt
occurrs.
Verified by oscilloscope that the spi clock pauses on trasmit underflow,
so transfer continuation is perfectly valid even though au1550 datasheet
says that on tx underflow zeroes will be transfered.
Also make some error messages more specific.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the Au1550 resource table and instead extract MMIO/IRQ/DMA
resources from platform resource information like any well-behaved
platform driver.
Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Jan Nikitenko <jan.nikitenko@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Another step to removing ->ioctl and to removing the BKL
[dbrownell@users.sourceforge.net: take final step; BKL not needed]
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, 'modalias' in the spi_device structure is a 'const char *'.
The spi_new_device() function fills in the modalias value from a passed in
spi_board_info data block. Since it is a pointer copy, the new spi_device
remains dependent on the spi_board_info structure after the new spi_device
is registered (no other fields in spi_device directly depend on the
spi_board_info structure; all of the other data is copied).
This causes a problem when dynamically propulating the list of attached
SPI devices. For example, in arch/powerpc, the list of SPI devices can be
populated from data in the device tree. With the current code, the device
tree adapter must kmalloc() a new spi_board_info structure for each new
SPI device it finds in the device tree, and there is no simple mechanism
in place for keeping track of these allocations.
This patch changes modalias from a 'const char *' to a fixed char array.
By copying the modalias string instead of referencing it, the dependency
on the spi_board_info structure is eliminated and an outside caller does
not need to maintain a separate spi_board_info allocation for each device.
If searched through the code to the best of my ability for any references
to modalias which may be affected by this change and haven't found
anything. It has been tested with the lite5200b platform in arch/powerpc.
[dbrownell@users.sourceforge.net: cope with linux-next changes: KOBJ_NAME_LEN obliterated, etc]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use "if SPI_MASTER" to remove numerous dependencies.
[dbrownell@users.sourceforge.net: remove a couple now-needless EXPERIMENTAL dependencies too]
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
xilinx_spi->irq is unsigned, so the test fails
Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Andrei Konovalov <akonovalov@ru.mvista.com>
Cc: Yuri Frolov <yfrolov@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This updates the SPI clock rate calculations for the spi_mpc83xx driver.
Some boundary conditions were wrong, and in several cases divide-by-16
wasn't always needed
Signed-off-by: Chen Gong <g.chen@freescale.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Before setting STOP_TX, set _brkcr to 0 so the SMC does not send a break
character. The driver appears to properly re-initialize _brkcr when the
SMC is restarted.
Do not interrupt RX/TX when the termios is being adjusted; it results in
corrupted characters appearing on the line.
Cc: Vitaly Bordug <vbordug@ru.mvista.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changes to the generic console support code that happened a while ago
introduced a scenario where the initial console is used in parallel with
the final console during a brief period when switching between the two is
in progress. During that time a message about the switch-over is printed.
With some combinations of chips, firmware and drivers, such as the DEC
DZ11 clone used with the DECstation, a hang may happen because the
firmware used for the initial console may not expect the state of the chip
after it has been initialised by the driver.
This is a workaround for the DZ11 which reuses the power-management
callback to keep the transmitter of the line associated with the console
enabled. It reflects the consensus reached in a discussion a while ago.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changes to the generic console support code that happened a while ago
introduced a scenario where the initial console is used in parallel with
the final console during a brief period when switching between the two is
in progress. During that time a message about the switch-over is printed.
With some combinations of chips, firmware and drivers, such as the Zilog
Z85C30 SCC used with the DECstation, a hang may happen because the
firmware used for the initial console may not expect the state of the chip
after it has been initialised by the driver. This is not a bug in the
firmware, as some registers it would have to examine are write-only.
This is a workaround for the Z85C30 which reuses the power-management
callback to keep the transmitter of the line associated with the console
enabled. It reflects the consensus reached in a discussion a while ago.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is a no-name PCI card. I found no reference to a producer so I used
"UNKNOWN_0x1584" as the name.
Full lspci:
01:07.0 0780: 10b5:9050 (rev 01)
Subsystem: 10b5:1584
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- \
ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- \
DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 10
Region 1: I/O ports at ec00 [size=128]
Region 2: I/O ports at e480 [size=32]
Region 3: I/O ports at e400 [size=8]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA \
PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] #06 [0080]
Capabilities: [4c] Vital Product Data
After:
0000:01:07.0: ttyS4 at I/O 0xe480 (irq = 10) is a 16550A
0000:01:07.0: ttyS5 at I/O 0xe488 (irq = 10) is a 16550A
0000:01:07.0: ttyS6 at I/O 0xe490 (irq = 10) is a 16550A
0000:01:07.0: ttyS7 at I/O 0xe498 (irq = 10) is a 16550A
Signed-off-by: Catalin(ux) M BOIE <catab@embedromix.ro>
Acked-by: Alan Cox <alan@redhat.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Intel 82571 has a "Serial Over LAN" feature that doesn't properly
implements the receiving of break characters. When a break is received,
it doesn't set UART_LSR_DR and unless another character is received, the
break won't be received by the application.
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds the missing MODULE_LICENSE("GPL").
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds test that ensure the boundary conditions for the various
constants introduced in the previous patches is met. No code is generated.
[akpm@linux-foundation.org: fix alpha]
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch adds O_NONBLOCK support to pipe2. It is minimally more involved
than the patches for eventfd et.al but still trivial. The interfaces of the
create_write_pipe and create_read_pipe helper functions were changed and the
one other caller as well.
The following test must be adjusted for architectures other than x86 and
x86-64 and in case the syscall numbers changed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
#include <sys/syscall.h>
#ifndef __NR_pipe2
# ifdef __x86_64__
# define __NR_pipe2 293
# elif defined __i386__
# define __NR_pipe2 331
# else
# error "need __NR_pipe2"
# endif
#endif
int
main (void)
{
int fds[2];
if (syscall (__NR_pipe2, fds, 0) == -1)
{
puts ("pipe2(0) failed");
return 1;
}
for (int i = 0; i < 2; ++i)
{
int fl = fcntl (fds[i], F_GETFL);
if (fl == -1)
{
puts ("fcntl failed");
return 1;
}
if (fl & O_NONBLOCK)
{
printf ("pipe2(0) set non-blocking mode for fds[%d]\n", i);
return 1;
}
close (fds[i]);
}
if (syscall (__NR_pipe2, fds, O_NONBLOCK) == -1)
{
puts ("pipe2(O_NONBLOCK) failed");
return 1;
}
for (int i = 0; i < 2; ++i)
{
int fl = fcntl (fds[i], F_GETFL);
if (fl == -1)
{
puts ("fcntl failed");
return 1;
}
if ((fl & O_NONBLOCK) == 0)
{
printf ("pipe2(O_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i);
return 1;
}
close (fds[i]);
}
puts ("OK");
return 0;
}
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Ulrich Drepper <drepper@redhat.com>
Acked-by: Davide Libenzi <davidel@xmailserver.org>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ian Kent
Jeff Moyer
Michael Halcrow
Harvey Harrison
Miklos Szeredi
Eric Sandeen
Tyler Hicks
Wang Chen
Stefano Stabellini
Jiri Slaby
Jan Nikitenko
Manuel Lauss
Alan Cox
Grant Likely
Robert P. J. Day
Roel Kluin
Chen Gong
Andre Haupt
Nye Liu
Maciej W. Rozycki
Catalin(ux) M BOIE
Aristeu Rozanski
Adrian Bunk
Ulrich Drepper