This patch adds devicetree binding documentation for the
Arcx anybus controller.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a driver for the Arcx anybus controller.
This device implements two Anybus-S hosts (buses),
and connects to the SoC via a parallel memory bus.
There is also a CAN power readout, unrelated to the Anybus,
modelled as a regulator.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Anybus-S/Anybus-M is a series of interchangeable fieldbus communication
modules featuring on board memory and processing power. All software and
hardware functionality required to communicate on the fieldbus is
incorporated in the module itself, allowing the application to focus on
other tasks.
Typical applications are frequency inverters, HMI and visualization
devices, instruments, scales, robotics, PLC’s and intelligent measuring
devices.
Official documentation:
https://www.anybus.com/docs/librariesprovider7/default-document-library/
manuals-design-guides/hms-hmsi-27-275.pdf
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fieldbus device (client) adapters allow data exchange with a PLC aka.
"Fieldbus Controller" over a fieldbus (Profinet, FLNet, etc.)
They are typically used when a Linux device wants to expose itself
as an actuator, motor, console light, switch, etc. over the fieldbus.
This framework is designed to provide a generic interface to Fieldbus
Devices from both the Linux Kernel and the userspace.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove an unused struct tx_pending_t, as it is never used in
kernel tree.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove typedef in struct ieee_param, as the struct that
has elements that can reasonably be directly accessed
should never be a typedef.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove typedef in struct ieee_param_ex, as the struct that
has elements that can reasonably be directly accessed should
never be a typedef.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When setting output power level called, the power level should be
checked by power amplifier level register and high power option. There
was todo about it. Add some variables for checking power level range.
The values that used for checking high power or minimum power are from
rf69 datasheets. The maximum power level is always same regardless of
mode.
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove an exceptional & on function names, otherwise they are used as
pointers without &.
Issue suggested using Coccinelle.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Do not use uninitialized variable 'port' when printing an error message
Signed-off-by: Antti Keränen <detegr@gmail.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
struct boo entry[];
};
size = sizeof(struct foo) + count * sizeof(struct boo);
instance = kzalloc(size, GFP_KERNEL)
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
size = struct_size(instance, entry, count);
or
instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL)
Based on the above, replace gdma_dma_alloc_desc() with kzalloc() and
use the new struct_size() helper.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
crc16_ccitt() function does "BIT(0) << i" instead of "BIT(i)".
Using !! is slightly shorter than "foo ? 1: 0" and remove unnecessary
parentheses to make the code simple.
Issue suggested by Coccinelle.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function name is otherwise used as pointers without &.
Issue suggested by Coccinelle.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/staging/rtlwifi/base.c: In function 'rtl_tx_agg_stop':
drivers/staging/rtlwifi/base.c:1733:23: warning:
variable 'tid_data' set but not used [-Wunused-but-set-variable]
drivers/staging/rtlwifi/base.c: In function 'rtl_check_beacon_key':
drivers/staging/rtlwifi/base.c:2474:5: warning:
variable 'ds_param_len' set but not used [-Wunused-but-set-variable]
drivers/staging/rtlwifi/base.c:2472:5: warning:
variable 'ht_oper_len' set but not used [-Wunused-but-set-variable]
drivers/staging/rtlwifi/base.c:2470:5: warning:
variable 'ht_cap_len' set but not used [-Wunused-but-set-variable]
They are never used and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Added a blank line after declarations.
Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.
Also since commit f467c5640c ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:
...
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:
config FOO
bool
config FOO
bool
default n
With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
...
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove typedef in struct sdio_data and make the respective changes in
associated files, as the struct that has elements that can reasonably
be directly accessed should never be a typedef.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the checkpath error:
CHECK: Blank lines aren't necessary after an open brace '{'
Signed-off-by: Daniel Junho <djunho@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/staging/rtl8192e/rtl8192e/rtl_pci.c: In function 'rtl92e_check_adapter':
drivers/staging/rtl8192e/rtl8192e/rtl_pci.c:36:6: warning:
variable 'VenderID' set but not used [-Wunused-but-set-variable]
u16 VenderID;
^
It's never used and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/staging/rtlwifi/rtl8822be/hw.c: In function 'rtl8822be_update_hal_rate_mask':
drivers/staging/rtlwifi/rtl8822be/hw.c:2144:5: warning:
variable 'curtxbw_40mhz' set but not used [-Wunused-but-set-variable]
It's never used and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add space between "enum TXDESC_SC" and '{' at line 86.
Fix the following error from checkpatch.pl
WARNING: missing space after enum definition
+enum TXDESC_SC{
Signed-off-by: William Tustumi <whatust@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch coding style errors on rtl819x_TSProc.c
- space required before the open parenthesis '('
- spaces required around that '=='
Signed-off-by: Caio Salvador Rohwedder <caiosalvador96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch error: "ERROR: space required after that close brace '}'".
Signed-off-by: Gabriel Siqueira <gabriel.gabrielhs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix checkpatch error "ERROR: code indent should use tabs where possible"
in hal_com_phycfg.c:1726.
Signed-off-by: Beatriz Martins de Carvalho <martinsdecarvalhobeatriz@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function sta2sta_data_frame() is only used in rtw_recv.c.
So make it static.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The declaration of sta2sta_data_frame() is directly above
the function definition. Remove the unnecessary declaration.
This also clears a checkpatch issue.
CHECK: Lines should not end with a '('
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
List wlan_network is built properly with init_list_head and
list_add_tail which cancels out its probability of being NULL because of
the precence of list_head at the top of this structure. Hence, the NULL
test can be omitted.
Signed-off-by: Himadri Pandya <himadri18.07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `np->permission' structure is smaller than the `np' structure but
sizeof(*np) worth of data is copied in there. Fix the size passed to
copy_from_user() to avoid overrun.
Fixes: 3d2ec9dcd5 ("staging: Android: Add 'vsoc' driver for cuttlefish.")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch updates the driver documentation files to reflect the
latest changes regarding configfs.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
v2:
- changed kernel version to 5.2
v3:
v4:
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds code that cleans up established links whenever the destroy
attribute is set or if the config_item (directory) is being removed.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reading the create attribute that triggers the creation of a link to
a certain channel is not necessary. Hence, it is being removed.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch makes the driver accept a link configuration eventhough no
device is attached to the bus. Instead the configuration is being applied
as soon as a device is being registered with the core.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the driver attribute add_link. It is not needed, because
the link management is now done via configfs.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch cuts off the usb_device prefix of the description string.
It is not needed, as the interface type is already available with the
interface attribute of a channel.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes the access flags of the channel attributes to
read-only. This is needed, because configuration is done via configfs.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch enables the configfs functionality of the driver by
registering the configfs subsystems and compiling the configfs
part of the sources.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adapts the sound card management to the configfs changes.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the core's interface to configfs file.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the param argument to the function parameter of
the call-back probe_channel. This parameter is needed to configure
the channels of an attached device.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds the file configfs.c to the driver directory. The file
registers the necessary subsystems with configfs in order to move the
driver configuration from sysfs to configfs.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since moving the message buffers off the stack, the dynamically
allocated get-prop-descriptor request buffer is incorrectly sized due to
using the pointer rather than request-struct size when creating the
operation.
Fortunately, the pointer size is always larger than this one-byte
request, but this could still cause trouble on the remote end due to the
unexpected message size.
Fixes: 9d15134d06 ("greybus: power_supply: rework get descriptors")
Cc: stable <stable@vger.kernel.org> # 4.9
Cc: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use DIV_ROUND_UP in-kernel function to make code simple and more
understandable.
Issue found using Coccinelle.
Signed-off-by: Madhumitha Prabakaran <madhumithabiw@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a spelling mistake in a netdev_err error message, fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usleep_range() is called in non-atomic context so there is little point
in setting min==max as the jitter of hrtimer is determined by interruptions
anyway. usleep_range can only perform the intended coalescence if some
room for placing the hrtimer is provided. Given the range of milliseconds
the delay will be 2+ anyway - so make it 2-2.5 ms which gives hrtimers
space to optimize without negatively impacting performance.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since wilc_set_multicast_list() is called with dev->addr_list_lock
spinlock held, we can't use GFP_KERNEL memory allocation.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: e624c58cf8 ("staging: wilc1000: refactor code to avoid use of wilc_set_multicast_list global")
Cc: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Adham Abozaeid <adham.abozaeid@microchip.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As the expression evaluates to a boolean anyway (relational and logical
operators) conversion with the ternary operator is not needed here as
coccinelle notes (boolconv.cocci)
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a spelling mistake in a dev_error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sven Van Asbroeck
Madhumitha Prabakaran
Sidong Yang
Cesar Santos
Antti Keränen
Gustavo A. R. Silva
YueHaibing
Gabriela Bittencourt
Bartlomiej Zolnierkiewicz
Moses Christopher
Daniel Junho
William Tustumi
Caio Salvador Rohwedder
Gabriel Siqueira
Beatriz Martins de Carvalho
Michael Straube
Himadri Pandya
Vincent Stehlé
Christian Gromm
Johan Hovold
Colin Ian King
Nicholas Mc Guire
Tetsuo Handa